diff --git a/en/gettingstarted.md b/en/gettingstarted.md
index 45e18c2a2fe764c2dc76117bf36fb720e7eda1c6..c7483ad6ad5d024cc1012210400ba3bef27e0a37 100644
--- a/en/gettingstarted.md
+++ b/en/gettingstarted.md
@@ -35,18 +35,13 @@ state LED will remain blinking and glowing as you set it in the app.
 
 ### USB storage
 
-Your card10 can function similar to a USB stick, if you start it in _USB storage mode_. You can use this mode to upload _configuration files_ and _micropython scripts_. To enter _USB storage mode_, first switch off your card10 with a long press of the POWER button. Next, hold down the RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.".
+Your card10 can function similar to a USB stick in its _USB storage mode_. You can use this mode to upload _configuration files_ , firmware updates and _MicropPython scripts_.
 
-Now when you connect the card10 to your laptop via USB, it will show up as a storage device. 
+To enter _USB storage mode_, use POWER button to enter the menu. Now use the RIGHT button to select _USB Storage_ and press SELECT. If your card10 is connected to another computer via USB, it will show up as a storage device. Press any button to exit _USB storage mode_ again.
 
-<div class="p-notification--caution">
-  <p class="p-notification__response">
-    <span class="p-notification__status">Important:</span>Don't forget to eject/unmount the card10 before unplugging it or pressing any buttons on the card10
-  </p>
-</div>
+**Important:** Don't forget to eject/unmount the card10 before unplugging it or pressing any 
 
-
-The USB storage mode is exited by briefly pressing the POWER button.
+If you don't have the _USB Storage_ meny entry or your card10 reboots while using it, you can also use the bootloader to access your card10: First switch off your card10 with a long press of the POWER button. Next, hold down the RIGHT button and the POWER button, until your display shows the text "USB activated. Ready.". Use your operating systems "Eject Safely" functiion or press the POWER button again to exit the bootloader after you are done.
 
 ### Setting your nickname
 To set your nickname, create a file called `nickname.txt` on your laptop.