From ab1e798f4d536b464f26e7f41c8d730495918330 Mon Sep 17 00:00:00 2001 From: schneider <schneider@muc.ccc.de> Date: Sat, 24 Aug 2019 16:56:08 +0000 Subject: [PATCH] Update ecg_kit_assembly.md --- en/ecg_kit_assembly.md | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/en/ecg_kit_assembly.md b/en/ecg_kit_assembly.md index d1ffd8b..bdebd67 100644 --- a/en/ecg_kit_assembly.md +++ b/en/ecg_kit_assembly.md @@ -14,19 +14,19 @@ Slide the big shrinking tube over the USB cable Separate the wires as shown in the picture - +[](/media/ecg/wire-meanings.jpg) Cut off all wires ecxept for orange and purple - +[](/media/ecg/cut-off-wires.jpg) Move the two small shrinking tubes over the ECG wires Solder the ECG wires to the USB wires as shown in the pictures - +[](/media/ecg/3-solder.jpg) @@ -34,26 +34,26 @@ Test your ECG setup on your Card10 prior the next step Slide the small shrinking tubes over the soldering connections and apply hot air (e.g. lighter) - +[](/media/ecg/4-add-heat-shrink.jpg) - +[](/media/ecg/5-shrik-this.jpg) Slide the bigger shrinking tube over the two small ones and also shrink it - +[](/media/ecg/large-heat-shrink.jpg) Have fun and hack ECG stuff - +[](/media/ecg/fertig.jpg) ### Usage - +[](/media/ecg/application.jpg) #### ECG -- GitLab