From ff987ccf11ece1317ab97dbc5dd6a901ad33ddc1 Mon Sep 17 00:00:00 2001
From: Dave Hylands <dhylands@gmail.com>
Date: Wed, 6 May 2015 12:43:51 -0700
Subject: [PATCH] stmhal: Move debug UART repl to after uart_init0 call.
---
stmhal/main.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/stmhal/main.c b/stmhal/main.c
index d57bb2b2d..70cb793e3 100644
--- a/stmhal/main.c
+++ b/stmhal/main.c
@@ -377,6 +377,17 @@ soft_reset:
mp_obj_list_append(mp_sys_path, MP_OBJ_NEW_QSTR(MP_QSTR__slash_flash_slash_lib));
mp_obj_list_init(mp_sys_argv, 0);
+ // Initialise low-level sub-systems. Here we need to very basic things like
+ // zeroing out memory and resetting any of the sub-systems. Following this
+ // we can run Python scripts (eg boot.py), but anything that is configurable
+ // by boot.py must be set after boot.py is run.
+
+ readline_init0();
+ pin_init0();
+ extint_init0();
+ timer_init0();
+ uart_init0();
+
// Change #if 0 to #if 1 if you want REPL on UART_6 (or another uart)
// as well as on USB VCP
#if 0
@@ -391,16 +402,6 @@ soft_reset:
MP_STATE_PORT(pyb_stdio_uart) = NULL;
#endif
- // Initialise low-level sub-systems. Here we need to very basic things like
- // zeroing out memory and resetting any of the sub-systems. Following this
- // we can run Python scripts (eg boot.py), but anything that is configurable
- // by boot.py must be set after boot.py is run.
-
- readline_init0();
- pin_init0();
- extint_init0();
- timer_init0();
- uart_init0();
#if MICROPY_HW_ENABLE_CAN
can_init0();
#endif
--
GitLab