diff --git a/testing/examples/LPC2148Test/prj/eclipse_ram.gdb b/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
index 48796ae4cb727da6b0555cb4f766520f4ef87fd3..4f423124d8ad2f7f338e02a15f0ba793e8c7a214 100644
--- a/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
+++ b/testing/examples/LPC2148Test/prj/eclipse_ram.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
continue
\ No newline at end of file
diff --git a/testing/examples/LPC2148Test/prj/eclipse_rom.gdb b/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
index bbaf76b5d361a806a1b044a6316fc4247ccb243c..86780056d11e91e03e8909c392c3d635c3aca212 100644
--- a/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
+++ b/testing/examples/LPC2148Test/prj/eclipse_rom.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 force_hw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 force_hw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
continue
\ No newline at end of file
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
index 85b09e0c1e3b2e8bbb4f85d102ce856ac36ee1e5..842687f3e416e44de701ebd72b712b1e628decc6 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
+++ b/testing/examples/LPC2148Test/prj/lpc2148_jtagkey.cfg
@@ -1,38 +1,38 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 3
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x7d000 0 0 0 lpc2000_v2 14765 calc_checksum
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_ram.ld b/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
index 04f52471f4c06b4ad6afc34cd22e2d4a9bd2b5a7..b7951342d4fba2ab5491c0a3ccf99150a7770247 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
+++ b/testing/examples/LPC2148Test/prj/lpc2148_ram.ld
@@ -1,140 +1,140 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 18.12.06 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
- * ram of the LPC2148. For more information about the memory of the LPC2148
- * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
- * Reference is made to the user manual from 25 July 2006 Rev. 02
- *
- * Take a look at page 8, section 1.Memory maps
- */
-
-MEMORY
-{
- ram : org = 0x40000000, len = 32k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > ram
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 18.12.06 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
+ * ram of the LPC2148. For more information about the memory of the LPC2148
+ * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
+ * Reference is made to the user manual from 25 July 2006 Rev. 02
+ *
+ * Take a look at page 8, section 1.Memory maps
+ */
+
+MEMORY
+{
+ ram : org = 0x40000000, len = 32k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/LPC2148Test/prj/lpc2148_rom.ld b/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
index 73df37cbe543141791e221d18001a72f950ab21f..5844fffce8a8eadd1ce26c95f52848b86de5c7f5 100644
--- a/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
+++ b/testing/examples/LPC2148Test/prj/lpc2148_rom.ld
@@ -1,141 +1,141 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 26.01.08 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
- * ram of the LPC2148. For more information about the memory of the LPC2148
- * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
- * Reference is made to the user manual from 25 July 2006 Rev. 02
- *
- * Take a look at page 8, section 1.Memory maps
- */
-
-MEMORY
-{
- rom : org = 0x00000000, len = 512k
- ram : org = 0x40000000, len = 32k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > rom
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 26.01.08 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpcp2148_ram.ld, locate the program in the internal
+ * ram of the LPC2148. For more information about the memory of the LPC2148
+ * take a look in the LPC2141/2142/2144/2146/2148 USER MANUAL.
+ * Reference is made to the user manual from 25 July 2006 Rev. 02
+ *
+ * Take a look at page 8, section 1.Memory maps
+ */
+
+MEMORY
+{
+ rom : org = 0x00000000, len = 512k
+ ram : org = 0x40000000, len = 32k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > rom
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/LPC2294Test/prj/eclipse_ram.gdb b/testing/examples/LPC2294Test/prj/eclipse_ram.gdb
index 48796ae4cb727da6b0555cb4f766520f4ef87fd3..4f423124d8ad2f7f338e02a15f0ba793e8c7a214 100644
--- a/testing/examples/LPC2294Test/prj/eclipse_ram.gdb
+++ b/testing/examples/LPC2294Test/prj/eclipse_ram.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
continue
\ No newline at end of file
diff --git a/testing/examples/LPC2294Test/prj/eclipse_rom.gdb b/testing/examples/LPC2294Test/prj/eclipse_rom.gdb
index bbaf76b5d361a806a1b044a6316fc4247ccb243c..86780056d11e91e03e8909c392c3d635c3aca212 100644
--- a/testing/examples/LPC2294Test/prj/eclipse_rom.gdb
+++ b/testing/examples/LPC2294Test/prj/eclipse_rom.gdb
@@ -1,11 +1,11 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 force_hw_bkpts enable
-monitor mww 0xE01FC040 0x0002
-monitor mdw 0xE01FC040
-load
-break main
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 force_hw_bkpts enable
+monitor mww 0xE01FC040 0x0002
+monitor mdw 0xE01FC040
+load
+break main
continue
\ No newline at end of file
diff --git a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
index 9d975099c7c0f50c7aaa20322985f47537a342f3..1afbf1e943723b723802aff68ae028eb04e65f51 100644
--- a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
+++ b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
@@ -1,39 +1,39 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash configuration
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 3
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
+run_and_halt_time 0 30
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash configuration
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/LPC2294Test/prj/lpc2294_ram.ld b/testing/examples/LPC2294Test/prj/lpc2294_ram.ld
index ed0db8cf4e4747849341314b902e89fa47b34762..17eaedd87d6bd6bf1fa37d4863ce25af8561b06d 100644
--- a/testing/examples/LPC2294Test/prj/lpc2294_ram.ld
+++ b/testing/examples/LPC2294Test/prj/lpc2294_ram.ld
@@ -1,140 +1,140 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 31.03.06 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpce2294_ram.ld, locate the program in the internal
- * ram of the LPC2294. For more information about the memory of the LPC2294
- * take a look in the LPC2119/2129/2194/2292/2294 USER MANUAL.
- * Reference is made to the user manual from 2004 May 03
- *
- * Take a look at page 48, section 2.Memory Addressing
- */
-
-MEMORY
-{
- ram : org = 0x40000000, len = 16k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > ram
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 31.03.06 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpce2294_ram.ld, locate the program in the internal
+ * ram of the LPC2294. For more information about the memory of the LPC2294
+ * take a look in the LPC2119/2129/2194/2292/2294 USER MANUAL.
+ * Reference is made to the user manual from 2004 May 03
+ *
+ * Take a look at page 48, section 2.Memory Addressing
+ */
+
+MEMORY
+{
+ ram : org = 0x40000000, len = 16k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/LPC2294Test/prj/lpc2294_rom.ld b/testing/examples/LPC2294Test/prj/lpc2294_rom.ld
index 92bac94fd353d2c18391e455b4b47ac8fdd80822..64a28f0c6e6df3da739e8956840140a15ae9cb45 100644
--- a/testing/examples/LPC2294Test/prj/lpc2294_rom.ld
+++ b/testing/examples/LPC2294Test/prj/lpc2294_rom.ld
@@ -1,141 +1,141 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 31.03.06 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-/*
- * This file, olimex_lpce2294_ram.ld, locate the program in the internal
- * ram of the LPC2294. For more information about the memory of the LPC2294
- * take a look in the LPC2119/2129/2194/2292/2294 USER MANUAL.
- * Reference is made to the user manual from 2004 May 03
- *
- * Take a look at page 48, section 2.Memory Addressing
- */
-
-MEMORY
-{
- rom : org = 0x00000000, len = 256k
- ram : org = 0x40000000, len = 16k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > rom
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 31.03.06 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+/*
+ * This file, olimex_lpce2294_ram.ld, locate the program in the internal
+ * ram of the LPC2294. For more information about the memory of the LPC2294
+ * take a look in the LPC2119/2129/2194/2292/2294 USER MANUAL.
+ * Reference is made to the user manual from 2004 May 03
+ *
+ * Take a look at page 48, section 2.Memory Addressing
+ */
+
+MEMORY
+{
+ rom : org = 0x00000000, len = 256k
+ ram : org = 0x40000000, len = 16k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > rom
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/SAM7S256Test/prj/eclipse_ram.gdb b/testing/examples/SAM7S256Test/prj/eclipse_ram.gdb
index 523cb208dc54e1a67d706d761d1707b218f6c043..9d9f24d16ecf3bbb8a9f640917a16986caef0be3 100644
--- a/testing/examples/SAM7S256Test/prj/eclipse_ram.gdb
+++ b/testing/examples/SAM7S256Test/prj/eclipse_ram.gdb
@@ -1,32 +1,32 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-
-# WDT_MR, disable watchdog
-monitor mww 0xFFFFFD44 0x00008000
-
-# RSTC_MR, enable user reset
-monitor mww 0xfffffd08 0xa5000001
-
-# CKGR_MOR
-monitor mww 0xFFFFFC20 0x00000601
-monitor sleep 10
-
-# CKGR_PLLR
-monitor mww 0xFFFFFC2C 0x00481c0e
-monitor sleep 10
-
-# PMC_MCKR
-monitor mww 0xFFFFFC30 0x00000007
-monitor sleep 10
-
-# PMC_IER
-monitor mww 0xFFFFFF60 0x00480100
-monitor sleep 100
-
-load
-break main
-continue
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+
+# WDT_MR, disable watchdog
+monitor mww 0xFFFFFD44 0x00008000
+
+# RSTC_MR, enable user reset
+monitor mww 0xfffffd08 0xa5000001
+
+# CKGR_MOR
+monitor mww 0xFFFFFC20 0x00000601
+monitor sleep 10
+
+# CKGR_PLLR
+monitor mww 0xFFFFFC2C 0x00481c0e
+monitor sleep 10
+
+# PMC_MCKR
+monitor mww 0xFFFFFC30 0x00000007
+monitor sleep 10
+
+# PMC_IER
+monitor mww 0xFFFFFF60 0x00480100
+monitor sleep 100
+
+load
+break main
+continue
diff --git a/testing/examples/SAM7S256Test/prj/eclipse_rom.gdb b/testing/examples/SAM7S256Test/prj/eclipse_rom.gdb
index 3aabf849aa85c31da050096252a544b3b59bbab7..db2a4643d68d3def5f993d081c337d4e084f343d 100644
--- a/testing/examples/SAM7S256Test/prj/eclipse_rom.gdb
+++ b/testing/examples/SAM7S256Test/prj/eclipse_rom.gdb
@@ -1,32 +1,32 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 force_hw_bkpts enable
-
-# WDT_MR, disable watchdog
-monitor mww 0xFFFFFD44 0x00008000
-
-# RSTC_MR, enable user reset
-monitor mww 0xfffffd08 0xa5000001
-
-# CKGR_MOR
-monitor mww 0xFFFFFC20 0x00000601
-monitor sleep 10
-
-# CKGR_PLLR
-monitor mww 0xFFFFFC2C 0x00481c0e
-monitor sleep 10
-
-# PMC_MCKR
-monitor mww 0xFFFFFC30 0x00000007
-monitor sleep 10
-
-# PMC_IER
-monitor mww 0xFFFFFF60 0x00480100
-monitor sleep 100
-
-load
-break main
-continue
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 force_hw_bkpts enable
+
+# WDT_MR, disable watchdog
+monitor mww 0xFFFFFD44 0x00008000
+
+# RSTC_MR, enable user reset
+monitor mww 0xfffffd08 0xa5000001
+
+# CKGR_MOR
+monitor mww 0xFFFFFC20 0x00000601
+monitor sleep 10
+
+# CKGR_PLLR
+monitor mww 0xFFFFFC2C 0x00481c0e
+monitor sleep 10
+
+# PMC_MCKR
+monitor mww 0xFFFFFC30 0x00000007
+monitor sleep 10
+
+# PMC_IER
+monitor mww 0xFFFFFF60 0x00480100
+monitor sleep 100
+
+load
+break main
+continue
diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
index e802499c5a0f368e2da1182ed17632716f7020c7..d526dd2492f65f1f42d7abb5fb6b78ee16d7c2b9 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_jtagkey.cfg
@@ -1,43 +1,43 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 0
-jtag_nsrst_delay 200
-jtag_ntrst_delay 200
-
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_init 0 arm7tdmi
-run_and_halt_time 0 30
-
-target_script 0 reset .\prj\sam7s256_reset.script
-
-working_area 0 0x00200000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 0
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little run_and_init 0 arm7tdmi
+run_and_halt_time 0 30
+
+target_script 0 reset .\prj\sam7s256_reset.script
+
+working_area 0 0x00200000 0x4000 nobackup
+
+#flash bank <driver> <base> <size> <chip_width> <bus_width>
+flash bank at91sam7 0 0 0 0 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_ram.ld b/testing/examples/SAM7S256Test/prj/sam7s256_ram.ld
index 9fc35c8665ae1fc08d0a92efa535f017997d6238..1b857c99f8715fac52e79610b0f49e4373b64149 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_ram.ld
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_ram.ld
@@ -1,132 +1,132 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 30.03.06 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-
-MEMORY
-{
- ram : org = 0x00200000, len = 64k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > ram
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 30.03.06 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+
+MEMORY
+{
+ ram : org = 0x00200000, len = 64k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > ram
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_reset.script b/testing/examples/SAM7S256Test/prj/sam7s256_reset.script
index ff609b01ed7d94cd99e46e247366086fbce9f29b..456341d6087e1989a87933f07477fd75a3e95e70 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_reset.script
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_reset.script
@@ -1,17 +1,17 @@
-#
-# Init - taken form the script openocd_at91sam7_ecr.script
-#
-# I take this script from the following page:
-#
-# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
-#
-mww 0xfffffd44 0x00008000 # disable watchdog
-mww 0xfffffd08 0xa5000001 # enable user reset
-mww 0xfffffc20 0x00000601 # CKGR_MOR : enable the main oscillator
-sleep 10
-mww 0xfffffc2c 0x00481c0e # CKGR_PLLR: 96.1097 MHz
-sleep 10
-mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-sleep 10
-mww 0xffffff60 0x003c0100 # MC_FMR: flash mode (FWS=1,FMCN=60)
-sleep 100
+#
+# Init - taken form the script openocd_at91sam7_ecr.script
+#
+# I take this script from the following page:
+#
+# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
+#
+mww 0xfffffd44 0x00008000 # disable watchdog
+mww 0xfffffd08 0xa5000001 # enable user reset
+mww 0xfffffc20 0x00000601 # CKGR_MOR : enable the main oscillator
+sleep 10
+mww 0xfffffc2c 0x00481c0e # CKGR_PLLR: 96.1097 MHz
+sleep 10
+mww 0xfffffc30 0x00000007 # PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
+sleep 10
+mww 0xffffff60 0x003c0100 # MC_FMR: flash mode (FWS=1,FMCN=60)
+sleep 100
diff --git a/testing/examples/SAM7S256Test/prj/sam7s256_rom.ld b/testing/examples/SAM7S256Test/prj/sam7s256_rom.ld
index e38746c2c74805d1c76a3c59202fdb430dfde860..b64854acd6d66dcb042f95f91e07e38c5d5d6b92 100644
--- a/testing/examples/SAM7S256Test/prj/sam7s256_rom.ld
+++ b/testing/examples/SAM7S256Test/prj/sam7s256_rom.ld
@@ -1,133 +1,133 @@
-/****************************************************************************
-* Copyright (c) 2006 by Michael Fischer. All rights reserved.
-*
-* Redistribution and use in source and binary forms, with or without
-* modification, are permitted provided that the following conditions
-* are met:
-*
-* 1. Redistributions of source code must retain the above copyright
-* notice, this list of conditions and the following disclaimer.
-* 2. Redistributions in binary form must reproduce the above copyright
-* notice, this list of conditions and the following disclaimer in the
-* documentation and/or other materials provided with the distribution.
-* 3. Neither the name of the author nor the names of its contributors may
-* be used to endorse or promote products derived from this software
-* without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
-* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
-* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-* SUCH DAMAGE.
-*
-****************************************************************************
-*
-* History:
-*
-* 26.01.08 mifi First Version
-****************************************************************************/
-
-
-ENTRY(ResetHandler)
-SEARCH_DIR(.)
-
-/*
- * Define stack size here
- */
-FIQ_STACK_SIZE = 0x0100;
-IRQ_STACK_SIZE = 0x0100;
-ABT_STACK_SIZE = 0x0100;
-UND_STACK_SIZE = 0x0100;
-SVC_STACK_SIZE = 0x0400;
-
-
-MEMORY
-{
- rom : org = 0x00100000, len = 256k
- ram : org = 0x00200000, len = 64k
-}
-
-/*
- * Do not change the next code
- */
-SECTIONS
-{
- .text :
- {
- *(.vectors);
- . = ALIGN(4);
- *(.init);
- . = ALIGN(4);
- *(.text);
- . = ALIGN(4);
- *(.rodata);
- . = ALIGN(4);
- *(.rodata*);
- . = ALIGN(4);
- *(.glue_7t);
- . = ALIGN(4);
- *(.glue_7);
- . = ALIGN(4);
- etext = .;
- } > rom
-
- .data :
- {
- PROVIDE (__data_start = .);
- *(.data)
- . = ALIGN(4);
- edata = .;
- _edata = .;
- PROVIDE (__data_end = .);
- } > ram
-
- .bss :
- {
- PROVIDE (__bss_start = .);
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- PROVIDE (__bss_end = .);
-
- . = ALIGN(256);
-
- PROVIDE (__stack_start = .);
-
- PROVIDE (__stack_fiq_start = .);
- . += FIQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_fiq_end = .);
-
- PROVIDE (__stack_irq_start = .);
- . += IRQ_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_irq_end = .);
-
- PROVIDE (__stack_abt_start = .);
- . += ABT_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_abt_end = .);
-
- PROVIDE (__stack_und_start = .);
- . += UND_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_und_end = .);
-
- PROVIDE (__stack_svc_start = .);
- . += SVC_STACK_SIZE;
- . = ALIGN(4);
- PROVIDE (__stack_svc_end = .);
- PROVIDE (__stack_end = .);
- PROVIDE (__heap_start = .);
- } > ram
-
-}
-/*** EOF ***/
-
+/****************************************************************************
+* Copyright (c) 2006 by Michael Fischer. All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* 1. Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in the
+* documentation and/or other materials provided with the distribution.
+* 3. Neither the name of the author nor the names of its contributors may
+* be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+* THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
+* THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+* SUCH DAMAGE.
+*
+****************************************************************************
+*
+* History:
+*
+* 26.01.08 mifi First Version
+****************************************************************************/
+
+
+ENTRY(ResetHandler)
+SEARCH_DIR(.)
+
+/*
+ * Define stack size here
+ */
+FIQ_STACK_SIZE = 0x0100;
+IRQ_STACK_SIZE = 0x0100;
+ABT_STACK_SIZE = 0x0100;
+UND_STACK_SIZE = 0x0100;
+SVC_STACK_SIZE = 0x0400;
+
+
+MEMORY
+{
+ rom : org = 0x00100000, len = 256k
+ ram : org = 0x00200000, len = 64k
+}
+
+/*
+ * Do not change the next code
+ */
+SECTIONS
+{
+ .text :
+ {
+ *(.vectors);
+ . = ALIGN(4);
+ *(.init);
+ . = ALIGN(4);
+ *(.text);
+ . = ALIGN(4);
+ *(.rodata);
+ . = ALIGN(4);
+ *(.rodata*);
+ . = ALIGN(4);
+ *(.glue_7t);
+ . = ALIGN(4);
+ *(.glue_7);
+ . = ALIGN(4);
+ etext = .;
+ } > rom
+
+ .data :
+ {
+ PROVIDE (__data_start = .);
+ *(.data)
+ . = ALIGN(4);
+ edata = .;
+ _edata = .;
+ PROVIDE (__data_end = .);
+ } > ram
+
+ .bss :
+ {
+ PROVIDE (__bss_start = .);
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ PROVIDE (__bss_end = .);
+
+ . = ALIGN(256);
+
+ PROVIDE (__stack_start = .);
+
+ PROVIDE (__stack_fiq_start = .);
+ . += FIQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_fiq_end = .);
+
+ PROVIDE (__stack_irq_start = .);
+ . += IRQ_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_irq_end = .);
+
+ PROVIDE (__stack_abt_start = .);
+ . += ABT_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_abt_end = .);
+
+ PROVIDE (__stack_und_start = .);
+ . += UND_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_und_end = .);
+
+ PROVIDE (__stack_svc_start = .);
+ . += SVC_STACK_SIZE;
+ . = ALIGN(4);
+ PROVIDE (__stack_svc_end = .);
+ PROVIDE (__stack_end = .);
+ PROVIDE (__heap_start = .);
+ } > ram
+
+}
+/*** EOF ***/
+
diff --git a/testing/examples/STR912Test/prj/eclipse_ram.gdb b/testing/examples/STR912Test/prj/eclipse_ram.gdb
index 56a7091fab609b69e510233aec24cb936fe35f3f..00a62d705f5ecfc281238ef9ee4e9404296906e7 100644
--- a/testing/examples/STR912Test/prj/eclipse_ram.gdb
+++ b/testing/examples/STR912Test/prj/eclipse_ram.gdb
@@ -1,21 +1,21 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 sw_bkpts enable
-
-# Set SRAM size to 96 KB
-monitor mww 0x5C002034 0x0197
-monitor mdw 0x5C002034
-
-# Set Flash, Bank0 size to 512 KB
-monitor mww 0x54000000 0xf
-
-load
-break main
-continue
-
-
-
-
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 sw_bkpts enable
+
+# Set SRAM size to 96 KB
+monitor mww 0x5C002034 0x0197
+monitor mdw 0x5C002034
+
+# Set Flash, Bank0 size to 512 KB
+monitor mww 0x54000000 0xf
+
+load
+break main
+continue
+
+
+
+
diff --git a/testing/examples/STR912Test/prj/eclipse_rom.gdb b/testing/examples/STR912Test/prj/eclipse_rom.gdb
index 87d1abc0f6b3259ff7691d9ac10f0ef4119f3781..58977cfcd8801c91f31595ac36a96d777e632259 100644
--- a/testing/examples/STR912Test/prj/eclipse_rom.gdb
+++ b/testing/examples/STR912Test/prj/eclipse_rom.gdb
@@ -1,21 +1,21 @@
-target remote localhost:3333
-monitor reset
-monitor sleep 500
-monitor poll
-monitor soft_reset_halt
-monitor arm7_9 force_hw_bkpts enable
-
-# Set SRAM size to 96 KB
-monitor mww 0x5C002034 0x0197
-monitor mdw 0x5C002034
-
-# Set Flash, Bank0 size to 512 KB
-monitor mww 0x54000000 0xf
-
-load
-break main
-continue
-
-
-
-
+target remote localhost:3333
+monitor reset
+monitor sleep 500
+monitor poll
+monitor soft_reset_halt
+monitor arm7_9 force_hw_bkpts enable
+
+# Set SRAM size to 96 KB
+monitor mww 0x5C002034 0x0197
+monitor mdw 0x5C002034
+
+# Set Flash, Bank0 size to 512 KB
+monitor mww 0x54000000 0xf
+
+load
+break main
+continue
+
+
+
+
diff --git a/testing/examples/STR912Test/prj/str912_jtagkey.cfg b/testing/examples/STR912Test/prj/str912_jtagkey.cfg
index 7ba8dd24dc98b8ec342885ddb87ba90c31812988..614e04220236b35c99f178f4ce7f26b8415584da 100644
--- a/testing/examples/STR912Test/prj/str912_jtagkey.cfg
+++ b/testing/examples/STR912Test/prj/str912_jtagkey.cfg
@@ -1,45 +1,45 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 1
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 8 0x1 0x1 0xfe
-jtag_device 4 0x1 0xf 0xe
-jtag_device 5 0x1 0x1 0x1e
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm966e little reset_halt 1 arm966e
-run_and_halt_time 0 30
-
-target_script 0 gdb_program_config .\prj\str912_program.script
-
-working_area 0 0x50000000 16384 nobackup
-
-#flash bank str7x <base> <size> 0 0 <target#> <variant>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 1
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 8 0x1 0x1 0xfe
+jtag_device 4 0x1 0xf 0xe
+jtag_device 5 0x1 0x1 0x1e
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm966e little reset_halt 1 arm966e
+run_and_halt_time 0 30
+
+target_script 0 gdb_program_config .\prj\str912_program.script
+
+working_area 0 0x50000000 16384 nobackup
+
+#flash bank str7x <base> <size> 0 0 <target#> <variant>
+flash bank str9x 0x00000000 0x00080000 0 0 0
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
diff --git a/testing/examples/STR912Test/prj/str912_program.script b/testing/examples/STR912Test/prj/str912_program.script
index 07e366dc641ecaa3c5848f6df26c17a162fd7a00..df0239b9d270d7b2303c33a60852bd14b01c1f60 100644
--- a/testing/examples/STR912Test/prj/str912_program.script
+++ b/testing/examples/STR912Test/prj/str912_program.script
@@ -1,9 +1,9 @@
-str9x flash_config 0 4 2 0 0x80000
-flash protect 0 0 7 off
-
-
-
-
-
-
-
+str9x flash_config 0 4 2 0 0x80000
+flash protect 0 0 7 off
+
+
+
+
+
+
+
diff --git a/testing/examples/STR912Test/prj/str912_ram.ld b/testing/examples/STR912Test/prj/str912_ram.ld
index 0974b390c3cca4b0cfcf0c5065fc181c74955756..269ada9bfaed3d9859cc8ac70471a36707891c94 100644
--- a/testing/examples/STR912Test/prj/str912_ram.ld
+++ b/testing/examples/STR912Test/prj/str912_ram.ld
@@ -1,218 +1,218 @@
-/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/* Stack Sizes */
-
- _STACKSIZE = 1024;
- _STACKSIZE_IRQ = 256;
- _STACKSIZE_FIQ = 0;
- _STACKSIZE_SVC = 1024;
- _STACKSIZE_ABT = 0;
- _STACKSIZE_UND = 0;
- _HEAPSIZE = 1024;
-
-/* Memory Definitions */
-
-MEMORY
-{
- DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
-}
-
-/* Section Definitions */
-
-SECTIONS
-{
- /* first section is .text which is used for code */
-
- .text :
- {
- KEEP(*(.vectors))
- KEEP(*(.init))
- *(.text .text.*)
- *(.gnu.linkonce.t.*)
- *(.glue_7t .glue_7)
- KEEP(*(.fini))
- *(.gcc_except_table)
- } >DATA =0
- . = ALIGN(4);
-
- /* .ctors .dtors are used for c++ constructors/destructors */
-
- .ctors :
- {
- PROVIDE(__ctors_start__ = .);
- KEEP(*(SORT(.ctors.*)))
- KEEP(*(.ctors))
- PROVIDE(__ctors_end__ = .);
- } >DATA
-
- .dtors :
- {
- PROVIDE(__dtors_start__ = .);
- KEEP(*(SORT(.dtors.*)))
- KEEP(*(.dtors))
- PROVIDE(__dtors_end__ = .);
- } >DATA
-
- /* .rodata section which is used for read-only data (constants) */
-
- .rodata :
- {
- *(.rodata .rodata.*)
- *(.gnu.linkonce.r.*)
- } >DATA
- . = ALIGN(4);
-
- _etext = .;
- PROVIDE (etext = .);
-
- /* .data section which is used for initialized data */
-
- .data : AT (_etext)
- {
- *(.data .data.*)
- *(.gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- } >DATA
- . = ALIGN(4);
-
- __data_start = .;
- _edata = .;
- PROVIDE (edata = .);
-
- /* .bss section which is used for uninitialized data */
-
- .bss :
- {
- __bss_start = .;
- __bss_start__ = .;
- *(.bss .bss.*)
- *(.gnu.linkonce.b.*)
- *(COMMON)
- . = ALIGN(4);
- } >DATA
- . = ALIGN(4);
- __bss_end__ = .;
-
- _end = .;
- PROVIDE(end = .);
-
- /* .heap section which is used for memory allocation */
-
- .heap (NOLOAD) :
- {
- __heap_start__ = .;
- *(.heap)
- . = MAX(__heap_start__ + _HEAPSIZE , .);
- } >DATA
- __heap_end__ = __heap_start__ + SIZEOF(.heap);
-
- /* .stack section - user mode stack */
-
- .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_start__ = .;
- *(.stack)
- . = MAX(__stack_start__ + _STACKSIZE , .);
- } >DATA
- __stack_end__ = __stack_start__ + SIZEOF(.stack);
-
- /* .stack_irq section */
-
- .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_irq_start__ = .;
- *(.stack_irq)
- . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
- } >DATA
- __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
-
- /* .stack_fiq section */
-
- .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_fiq_start__ = .;
- *(.stack_fiq)
- . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
- } >DATA
- __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
-
- /* .stack_svc section */
-
- .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_svc_start__ = .;
- *(.stack_svc)
- . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
- } >DATA
- __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
-
- /* .stack_abt section */
-
- .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_abt_start__ = .;
- *(.stack_abt)
- . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
- } >DATA
- __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
-
- /* .stack_und section */
-
- .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_und_start__ = .;
- *(.stack_und)
- . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
- } >DATA
- __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
-
+/***********************************************************************************
+* Copyright 2005 Anglia Design
+* This demo code and associated components are provided as is and has no warranty,
+* implied or otherwise. You are free to use/modify any of the provided
+* code at your own risk in your applications with the expressed limitation
+* of liability (see below)
+*
+* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
+* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
+* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
+* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+*
+* Author : Spencer Oliver
+* Web : www.anglia-designs.com
+*
+***********************************************************************************/
+
+/* Stack Sizes */
+
+ _STACKSIZE = 1024;
+ _STACKSIZE_IRQ = 256;
+ _STACKSIZE_FIQ = 0;
+ _STACKSIZE_SVC = 1024;
+ _STACKSIZE_ABT = 0;
+ _STACKSIZE_UND = 0;
+ _HEAPSIZE = 1024;
+
+/* Memory Definitions */
+
+MEMORY
+{
+ DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
+}
+
+/* Section Definitions */
+
+SECTIONS
+{
+ /* first section is .text which is used for code */
+
+ .text :
+ {
+ KEEP(*(.vectors))
+ KEEP(*(.init))
+ *(.text .text.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7t .glue_7)
+ KEEP(*(.fini))
+ *(.gcc_except_table)
+ } >DATA =0
+ . = ALIGN(4);
+
+ /* .ctors .dtors are used for c++ constructors/destructors */
+
+ .ctors :
+ {
+ PROVIDE(__ctors_start__ = .);
+ KEEP(*(SORT(.ctors.*)))
+ KEEP(*(.ctors))
+ PROVIDE(__ctors_end__ = .);
+ } >DATA
+
+ .dtors :
+ {
+ PROVIDE(__dtors_start__ = .);
+ KEEP(*(SORT(.dtors.*)))
+ KEEP(*(.dtors))
+ PROVIDE(__dtors_end__ = .);
+ } >DATA
+
+ /* .rodata section which is used for read-only data (constants) */
+
+ .rodata :
+ {
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.r.*)
+ } >DATA
+ . = ALIGN(4);
+
+ _etext = .;
+ PROVIDE (etext = .);
+
+ /* .data section which is used for initialized data */
+
+ .data : AT (_etext)
+ {
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ SORT(CONSTRUCTORS)
+ } >DATA
+ . = ALIGN(4);
+
+ __data_start = .;
+ _edata = .;
+ PROVIDE (edata = .);
+
+ /* .bss section which is used for uninitialized data */
+
+ .bss :
+ {
+ __bss_start = .;
+ __bss_start__ = .;
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ . = ALIGN(4);
+ } >DATA
+ . = ALIGN(4);
+ __bss_end__ = .;
+
+ _end = .;
+ PROVIDE(end = .);
+
+ /* .heap section which is used for memory allocation */
+
+ .heap (NOLOAD) :
+ {
+ __heap_start__ = .;
+ *(.heap)
+ . = MAX(__heap_start__ + _HEAPSIZE , .);
+ } >DATA
+ __heap_end__ = __heap_start__ + SIZEOF(.heap);
+
+ /* .stack section - user mode stack */
+
+ .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_start__ = .;
+ *(.stack)
+ . = MAX(__stack_start__ + _STACKSIZE , .);
+ } >DATA
+ __stack_end__ = __stack_start__ + SIZEOF(.stack);
+
+ /* .stack_irq section */
+
+ .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_irq_start__ = .;
+ *(.stack_irq)
+ . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
+ } >DATA
+ __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
+
+ /* .stack_fiq section */
+
+ .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_fiq_start__ = .;
+ *(.stack_fiq)
+ . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
+ } >DATA
+ __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
+
+ /* .stack_svc section */
+
+ .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_svc_start__ = .;
+ *(.stack_svc)
+ . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
+ } >DATA
+ __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
+
+ /* .stack_abt section */
+
+ .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_abt_start__ = .;
+ *(.stack_abt)
+ . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
+ } >DATA
+ __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
+
+ /* .stack_und section */
+
+ .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_und_start__ = .;
+ *(.stack_und)
+ . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
+ } >DATA
+ __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+}
+
diff --git a/testing/examples/STR912Test/prj/str912_rom.ld b/testing/examples/STR912Test/prj/str912_rom.ld
index 8cbb7f75c8d5cf45a66d2c7f3e53cfd3c2717806..804149d213a8b5920df696ea3f58754bb1fdbc13 100644
--- a/testing/examples/STR912Test/prj/str912_rom.ld
+++ b/testing/examples/STR912Test/prj/str912_rom.ld
@@ -1,249 +1,249 @@
-/***********************************************************************************
-* Copyright 2005 Anglia Design
-* This demo code and associated components are provided as is and has no warranty,
-* implied or otherwise. You are free to use/modify any of the provided
-* code at your own risk in your applications with the expressed limitation
-* of liability (see below)
-*
-* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
-* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
-* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
-* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-*
-* Author : Spencer Oliver
-* Web : www.anglia-designs.com
-*
-***********************************************************************************/
-
-/* Stack Sizes */
-
- _STACKSIZE = 1024;
- _STACKSIZE_IRQ = 256;
- _STACKSIZE_FIQ = 0;
- _STACKSIZE_SVC = 1024;
- _STACKSIZE_ABT = 0;
- _STACKSIZE_UND = 0;
- _HEAPSIZE = 1024;
-
-/* Memory Definitions */
-
-MEMORY
-{
- CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000
- DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
-}
-
-/* Section Definitions */
-
-SECTIONS
-{
- /* first section is .text which is used for code */
-
- .text :
- {
- CREATE_OBJECT_SYMBOLS
- KEEP(*(.vectors))
- KEEP(*(.init))
- *(.text .text.*)
- *(.gnu.linkonce.t.*)
- *(.glue_7t) *(.glue_7) *(.vfp11_veneer)
- KEEP(*(.fini))
- *(.gcc_except_table)
- } >CODE =0
- . = ALIGN(4);
-
- /* .ctors .dtors are used for c++ constructors/destructors */
-
- .ctors :
- {
- PROVIDE(__ctors_start__ = .);
- KEEP(*(SORT(.ctors.*)))
- KEEP(*(.ctors))
- PROVIDE(__ctors_end__ = .);
- } >CODE
-
- .dtors :
- {
- PROVIDE(__dtors_start__ = .);
- KEEP(*(SORT(.dtors.*)))
- KEEP(*(.dtors))
- PROVIDE(__dtors_end__ = .);
- } >CODE
-
- /* .rodata section which is used for read-only data (constants) */
-
- .rodata :
- {
- *(.rodata .rodata.*)
- *(.gnu.linkonce.r.*)
- } >CODE
- . = ALIGN(4);
-
- .init_array :
- {
- *(.init)
- *(.fini)
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP (*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP (*(.fini_array))
- KEEP (*(SORT(.fini_array.*)))
- PROVIDE_HIDDEN (__fini_array_end = .);
- } >CODE
-
- . = ALIGN(4);
-
- /* .ARM.exidx is sorted, so has to go in its own output section. */
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } >CODE
- __exidx_end = .;
-
- _etext = .;
- PROVIDE (etext = .);
-
- /* .data section which is used for initialized data */
-
- .data : AT (_etext)
- {
- __data_start = .;
- *(.data .data.*)
- *(.gnu.linkonce.d.*)
- SORT(CONSTRUCTORS)
- . = ALIGN(4);
- *(.fastrun .fastrun.*)
- } >DATA
- . = ALIGN(4);
-
- _edata = .;
- PROVIDE (edata = .);
-
- /* .bss section which is used for uninitialized data */
-
- .bss :
- {
- __bss_start = .;
- __bss_start__ = .;
- *(.bss .bss.*)
- *(.gnu.linkonce.b.*)
- *(COMMON)
- . = ALIGN(4);
- } >DATA
- . = ALIGN(4);
- __bss_end__ = .;
-
- _end = .;
- PROVIDE(end = .);
-
- /* .heap section which is used for memory allocation */
-
- .heap (NOLOAD) :
- {
- __heap_start__ = .;
- *(.heap)
- . = MAX(__heap_start__ + _HEAPSIZE , .);
- } >DATA
- __heap_end__ = __heap_start__ + SIZEOF(.heap);
-
- /* .stack section - user mode stack */
-
- .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_start__ = .;
- *(.stack)
- . = MAX(__stack_start__ + _STACKSIZE , .);
- } >DATA
- __stack_end__ = __stack_start__ + SIZEOF(.stack);
-
- /* .stack_irq section */
-
- .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_irq_start__ = .;
- *(.stack_irq)
- . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
- } >DATA
- __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
-
- /* .stack_fiq section */
-
- .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_fiq_start__ = .;
- *(.stack_fiq)
- . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
- } >DATA
- __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
-
- /* .stack_svc section */
-
- .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_svc_start__ = .;
- *(.stack_svc)
- . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
- } >DATA
- __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
-
- /* .stack_abt section */
-
- .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_abt_start__ = .;
- *(.stack_abt)
- . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
- } >DATA
- __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
-
- /* .stack_und section */
-
- .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
- {
- __stack_und_start__ = .;
- *(.stack_und)
- . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
- } >DATA
- __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
-
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
- /* DWARF debug sections.
- Symbols in the DWARF debugging sections are relative to the beginning
- of the section so we begin them at 0. */
- /* DWARF 1 */
- .debug 0 : { *(.debug) }
- .line 0 : { *(.line) }
- /* GNU DWARF 1 extensions */
- .debug_srcinfo 0 : { *(.debug_srcinfo) }
- .debug_sfnames 0 : { *(.debug_sfnames) }
- /* DWARF 1.1 and DWARF 2 */
- .debug_aranges 0 : { *(.debug_aranges) }
- .debug_pubnames 0 : { *(.debug_pubnames) }
- /* DWARF 2 */
- .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
- .debug_str 0 : { *(.debug_str) }
- .debug_loc 0 : { *(.debug_loc) }
- .debug_macinfo 0 : { *(.debug_macinfo) }
- /* SGI/MIPS DWARF 2 extensions */
- .debug_weaknames 0 : { *(.debug_weaknames) }
- .debug_funcnames 0 : { *(.debug_funcnames) }
- .debug_typenames 0 : { *(.debug_typenames) }
- .debug_varnames 0 : { *(.debug_varnames) }
-}
-
+/***********************************************************************************
+* Copyright 2005 Anglia Design
+* This demo code and associated components are provided as is and has no warranty,
+* implied or otherwise. You are free to use/modify any of the provided
+* code at your own risk in your applications with the expressed limitation
+* of liability (see below)
+*
+* LIMITATION OF LIABILITY: ANGLIA OR ANGLIA DESIGNS SHALL NOT BE LIABLE FOR ANY
+* LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA, INTERRUPTION OF BUSINESS, NOR FOR
+* INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
+* THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+*
+* Author : Spencer Oliver
+* Web : www.anglia-designs.com
+*
+***********************************************************************************/
+
+/* Stack Sizes */
+
+ _STACKSIZE = 1024;
+ _STACKSIZE_IRQ = 256;
+ _STACKSIZE_FIQ = 0;
+ _STACKSIZE_SVC = 1024;
+ _STACKSIZE_ABT = 0;
+ _STACKSIZE_UND = 0;
+ _HEAPSIZE = 1024;
+
+/* Memory Definitions */
+
+MEMORY
+{
+ CODE (rx) : ORIGIN = 0x00000000, LENGTH = 0x00080000
+ DATA (rw) : ORIGIN = 0x04000000, LENGTH = 0x00018000
+}
+
+/* Section Definitions */
+
+SECTIONS
+{
+ /* first section is .text which is used for code */
+
+ .text :
+ {
+ CREATE_OBJECT_SYMBOLS
+ KEEP(*(.vectors))
+ KEEP(*(.init))
+ *(.text .text.*)
+ *(.gnu.linkonce.t.*)
+ *(.glue_7t) *(.glue_7) *(.vfp11_veneer)
+ KEEP(*(.fini))
+ *(.gcc_except_table)
+ } >CODE =0
+ . = ALIGN(4);
+
+ /* .ctors .dtors are used for c++ constructors/destructors */
+
+ .ctors :
+ {
+ PROVIDE(__ctors_start__ = .);
+ KEEP(*(SORT(.ctors.*)))
+ KEEP(*(.ctors))
+ PROVIDE(__ctors_end__ = .);
+ } >CODE
+
+ .dtors :
+ {
+ PROVIDE(__dtors_start__ = .);
+ KEEP(*(SORT(.dtors.*)))
+ KEEP(*(.dtors))
+ PROVIDE(__dtors_end__ = .);
+ } >CODE
+
+ /* .rodata section which is used for read-only data (constants) */
+
+ .rodata :
+ {
+ *(.rodata .rodata.*)
+ *(.gnu.linkonce.r.*)
+ } >CODE
+ . = ALIGN(4);
+
+ .init_array :
+ {
+ *(.init)
+ *(.fini)
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(.fini_array))
+ KEEP (*(SORT(.fini_array.*)))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ } >CODE
+
+ . = ALIGN(4);
+
+ /* .ARM.exidx is sorted, so has to go in its own output section. */
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } >CODE
+ __exidx_end = .;
+
+ _etext = .;
+ PROVIDE (etext = .);
+
+ /* .data section which is used for initialized data */
+
+ .data : AT (_etext)
+ {
+ __data_start = .;
+ *(.data .data.*)
+ *(.gnu.linkonce.d.*)
+ SORT(CONSTRUCTORS)
+ . = ALIGN(4);
+ *(.fastrun .fastrun.*)
+ } >DATA
+ . = ALIGN(4);
+
+ _edata = .;
+ PROVIDE (edata = .);
+
+ /* .bss section which is used for uninitialized data */
+
+ .bss :
+ {
+ __bss_start = .;
+ __bss_start__ = .;
+ *(.bss .bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ . = ALIGN(4);
+ } >DATA
+ . = ALIGN(4);
+ __bss_end__ = .;
+
+ _end = .;
+ PROVIDE(end = .);
+
+ /* .heap section which is used for memory allocation */
+
+ .heap (NOLOAD) :
+ {
+ __heap_start__ = .;
+ *(.heap)
+ . = MAX(__heap_start__ + _HEAPSIZE , .);
+ } >DATA
+ __heap_end__ = __heap_start__ + SIZEOF(.heap);
+
+ /* .stack section - user mode stack */
+
+ .stack (__heap_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_start__ = .;
+ *(.stack)
+ . = MAX(__stack_start__ + _STACKSIZE , .);
+ } >DATA
+ __stack_end__ = __stack_start__ + SIZEOF(.stack);
+
+ /* .stack_irq section */
+
+ .stack_irq (__stack_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_irq_start__ = .;
+ *(.stack_irq)
+ . = MAX(__stack_irq_start__ + _STACKSIZE_IRQ , .);
+ } >DATA
+ __stack_irq_end__ = __stack_irq_start__ + SIZEOF(.stack_irq);
+
+ /* .stack_fiq section */
+
+ .stack_fiq (__stack_irq_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_fiq_start__ = .;
+ *(.stack_fiq)
+ . = MAX(__stack_fiq_start__ + _STACKSIZE_FIQ , .);
+ } >DATA
+ __stack_fiq_end__ = __stack_fiq_start__ + SIZEOF(.stack_fiq);
+
+ /* .stack_svc section */
+
+ .stack_svc (__stack_fiq_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_svc_start__ = .;
+ *(.stack_svc)
+ . = MAX(__stack_svc_start__ + _STACKSIZE_SVC , .);
+ } >DATA
+ __stack_svc_end__ = __stack_svc_start__ + SIZEOF(.stack_svc);
+
+ /* .stack_abt section */
+
+ .stack_abt (__stack_svc_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_abt_start__ = .;
+ *(.stack_abt)
+ . = MAX(__stack_abt_start__ + _STACKSIZE_ABT , .);
+ } >DATA
+ __stack_abt_end__ = __stack_abt_start__ + SIZEOF(.stack_abt);
+
+ /* .stack_und section */
+
+ .stack_und (__stack_abt_end__ + 3) / 4 * 4 (NOLOAD) :
+ {
+ __stack_und_start__ = .;
+ *(.stack_und)
+ . = MAX(__stack_und_start__ + _STACKSIZE_UND , .);
+ } >DATA
+ __stack_und_end__ = __stack_und_start__ + SIZEOF(.stack_und);
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+}
+