From 278ca633da5c7c2d1979129d7db912b1f4784d98 Mon Sep 17 00:00:00 2001
From: zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Mon, 1 Jun 2009 03:05:26 +0000
Subject: [PATCH] David Brownell <david-b@pacbell.net>:
Remove broken whitespace ... mostly at end of line, but
also in some cases blocks of inappropriate empty lines.
And spell "comamnd" right. :)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1972 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
src/flash/avrf.c | 108 +++++------
src/flash/lpc288x.c | 94 +++++-----
src/flash/ocl.c | 10 +-
src/flash/stellaris.c | 206 ++++++++++-----------
src/flash/stm32x.c | 420 +++++++++++++++++++++---------------------
src/flash/str9x.c | 168 ++++++++---------
src/flash/str9xpec.c | 77 +-------
7 files changed, 505 insertions(+), 578 deletions(-)
diff --git a/src/flash/avrf.c b/src/flash/avrf.c
index 307e54e89..301ce2658 100644
--- a/src/flash/avrf.c
+++ b/src/flash/avrf.c
@@ -50,7 +50,7 @@
#define AVR_JTAG_REG_ProgrammingCommand_Len 15
#define AVR_JTAG_REG_FlashDataByte_Len 16
-avrf_type_t avft_chips_info[] =
+avrf_type_t avft_chips_info[] =
{
// name, chip_id, flash_page_size, flash_page_num, eeprom_page_size, eeprom_page_num
{"atmega128", 0x9702, 256, 512, 8, 512},
@@ -102,7 +102,7 @@ static int avr_jtag_reset(avr_common_t *avr, u32 reset)
{
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_AVR_RESET);
avr_jtag_senddat(avr->jtag_info.tap, NULL, reset ,AVR_JTAG_REG_Reset_Len);
-
+
return ERROR_OK;
}
@@ -110,17 +110,17 @@ static int avr_jtag_read_jtagid(avr_common_t *avr, u32 *id)
{
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_IDCODE);
avr_jtag_senddat(avr->jtag_info.tap, id, 0, AVR_JTAG_REG_JTAGID_Len);
-
+
return ERROR_OK;
}
static int avr_jtagprg_enterprogmode(avr_common_t *avr)
{
avr_jtag_reset(avr, 1);
-
+
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_ENABLE);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0xA370, AVR_JTAG_REG_ProgrammingEnable_Len);
-
+
return ERROR_OK;
}
@@ -134,20 +134,20 @@ static int avr_jtagprg_leaveprogmode(avr_common_t *avr)
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0, AVR_JTAG_REG_ProgrammingEnable_Len);
avr_jtag_reset(avr, 0);
-
+
return ERROR_OK;
}
static int avr_jtagprg_chiperase(avr_common_t *avr)
{
u32 poll_value;
-
+
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_COMMANDS);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x2380, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3180, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3380, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3380, AVR_JTAG_REG_ProgrammingCommand_Len);
-
+
do{
poll_value = 0;
avr_jtag_senddat(avr->jtag_info.tap, &poll_value, 0x3380, AVR_JTAG_REG_ProgrammingCommand_Len);
@@ -157,25 +157,25 @@ static int avr_jtagprg_chiperase(avr_common_t *avr)
}
LOG_DEBUG("poll_value = 0x%04X", poll_value);
}while(!(poll_value & 0x0200));
-
+
return ERROR_OK;
}
static int avr_jtagprg_writeflashpage(avr_common_t *avr, u8 *page_buf, u32 buf_size, u32 addr, u32 page_size)
{
u32 i, poll_value;
-
+
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_COMMANDS);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x2310, AVR_JTAG_REG_ProgrammingCommand_Len);
-
+
// load addr high byte
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x0700 | ((addr >> 9) & 0xFF), AVR_JTAG_REG_ProgrammingCommand_Len);
-
+
// load addr low byte
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x0300 | ((addr >> 1) & 0xFF), AVR_JTAG_REG_ProgrammingCommand_Len);
-
+
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_PAGELOAD);
-
+
for (i = 0; i < page_size; i++)
{
if (i < buf_size)
@@ -187,14 +187,14 @@ static int avr_jtagprg_writeflashpage(avr_common_t *avr, u8 *page_buf, u32 buf_s
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0xFF, 8);
}
}
-
+
avr_jtag_sendinstr(avr->jtag_info.tap, NULL, AVR_JTAG_INS_PROG_COMMANDS);
-
+
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3700, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3500, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3700, AVR_JTAG_REG_ProgrammingCommand_Len);
avr_jtag_senddat(avr->jtag_info.tap, NULL, 0x3700, AVR_JTAG_REG_ProgrammingCommand_Len);
-
+
do{
poll_value = 0;
avr_jtag_senddat(avr->jtag_info.tap, &poll_value, 0x3700, AVR_JTAG_REG_ProgrammingCommand_Len);
@@ -204,7 +204,7 @@ static int avr_jtagprg_writeflashpage(avr_common_t *avr, u8 *page_buf, u32 buf_s
}
LOG_DEBUG("poll_value = 0x%04X", poll_value);
}while(!(poll_value & 0x0200));
-
+
return ERROR_OK;
}
@@ -212,28 +212,28 @@ static int avr_jtagprg_writeflashpage(avr_common_t *avr, u8 *page_buf, u32 buf_s
static int avrf_register_commands(struct command_context_s *cmd_ctx)
{
command_t *avr_cmd = register_command(cmd_ctx, NULL, "avr", NULL, COMMAND_ANY, "avr flash specific commands");
-
+
register_command(cmd_ctx, avr_cmd, "mass_erase", avrf_handle_mass_erase_command, COMMAND_EXEC,
"mass erase device");
-
+
return ERROR_OK;
}
static int avrf_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
avrf_flash_bank_t *avrf_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank avr configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
avrf_info = malloc(sizeof(avrf_flash_bank_t));
bank->driver_priv = avrf_info;
-
+
avrf_info->probed = 0;
-
+
return ERROR_OK;
}
@@ -254,28 +254,28 @@ static int avrf_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 cou
target_t *target = bank->target;
avr_common_t *avr = target->arch_info;
u32 cur_size, cur_buffer_size, page_size;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
page_size = bank->sectors[0].size;
if ((offset % page_size) != 0)
{
LOG_WARNING("offset 0x%x breaks required %d-byte alignment", offset, page_size);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
-
+
LOG_DEBUG("offset is 0x%08X", offset);
LOG_DEBUG("count is %d", count);
-
+
if (ERROR_OK != avr_jtagprg_enterprogmode(avr))
{
return ERROR_FAIL;
}
-
+
cur_size = 0;
while(count > 0)
{
@@ -290,10 +290,10 @@ static int avrf_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 cou
avr_jtagprg_writeflashpage(avr, buffer + cur_size, cur_buffer_size, offset + cur_size, page_size);
count -= cur_buffer_size;
cur_size += cur_buffer_size;
-
+
keep_alive();
}
-
+
return avr_jtagprg_leaveprogmode(avr);
}
@@ -308,7 +308,7 @@ static int avrf_probe(struct flash_bank_s *bank)
avrf_type_t *avr_info = NULL;
int i;
u32 device_id;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -316,19 +316,19 @@ static int avrf_probe(struct flash_bank_s *bank)
}
avrf_info->probed = 0;
-
+
avr_jtag_read_jtagid(avr, &device_id);
if (ERROR_OK != mcu_execute_queue())
{
return ERROR_FAIL;
}
-
+
LOG_INFO( "device id = 0x%08x", device_id );
if (EXTRACT_MFG(device_id) != 0x1F)
{
LOG_ERROR("0x%X is invalid Manufacturer for avr, 0x%X is expected", EXTRACT_MFG(device_id), 0x1F);
}
-
+
for (i = 0; i < (int)(sizeof(avft_chips_info) / sizeof(avft_chips_info[0])); i++)
{
if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id))
@@ -338,7 +338,7 @@ static int avrf_probe(struct flash_bank_s *bank)
break;
}
}
-
+
if (avr_info != NULL)
{
// chip found
@@ -346,7 +346,7 @@ static int avrf_probe(struct flash_bank_s *bank)
bank->size = (avr_info->flash_page_size * avr_info->flash_page_num);
bank->num_sectors = avr_info->flash_page_num;
bank->sectors = malloc(sizeof(flash_sector_t) * avr_info->flash_page_num);
-
+
for (i = 0; i < avr_info->flash_page_num; i++)
{
bank->sectors[i].offset = i * avr_info->flash_page_size;
@@ -354,7 +354,7 @@ static int avrf_probe(struct flash_bank_s *bank)
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
-
+
avrf_info->probed = 1;
return ERROR_OK;
}
@@ -362,7 +362,7 @@ static int avrf_probe(struct flash_bank_s *bank)
{
// chip not supported
LOG_ERROR("0x%X is not support for avr", EXTRACT_PART(device_id));
-
+
avrf_info->probed = 1;
return ERROR_FAIL;
}
@@ -389,36 +389,36 @@ static int avrf_info(struct flash_bank_s *bank, char *buf, int buf_size)
avrf_type_t *avr_info = NULL;
int i;
u32 device_id;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
avr_jtag_read_jtagid(avr, &device_id);
if (ERROR_OK != mcu_execute_queue())
{
return ERROR_FAIL;
}
-
+
LOG_INFO( "device id = 0x%08x", device_id );
if (EXTRACT_MFG(device_id) != 0x1F)
{
LOG_ERROR("0x%X is invalid Manufacturer for avr, 0x%X is expected", EXTRACT_MFG(device_id), 0x1F);
}
-
+
for (i = 0; i < (int)(sizeof(avft_chips_info) / sizeof(avft_chips_info[0])); i++)
{
if (avft_chips_info[i].chip_id == EXTRACT_PART(device_id))
{
avr_info = &avft_chips_info[i];
LOG_INFO("target device is %s", avr_info->name);
-
+
break;
}
}
-
+
if (avr_info != NULL)
{
// chip found
@@ -437,20 +437,20 @@ static int avrf_mass_erase(struct flash_bank_s *bank)
{
target_t *target = bank->target;
avr_common_t *avr = target->arch_info;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((ERROR_OK != avr_jtagprg_enterprogmode(avr))
|| (ERROR_OK != avr_jtagprg_chiperase(avr))
|| (ERROR_OK != avr_jtagprg_leaveprogmode(avr)))
{
return ERROR_FAIL;
}
-
+
return ERROR_OK;
}
@@ -458,20 +458,20 @@ static int avrf_handle_mass_erase_command(struct command_context_s *cmd_ctx, cha
{
flash_bank_t *bank;
int i;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "avr mass_erase <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
if (avrf_mass_erase(bank) == ERROR_OK)
{
/* set all sectors as erased */
@@ -479,14 +479,14 @@ static int avrf_handle_mass_erase_command(struct command_context_s *cmd_ctx, cha
{
bank->sectors[i].is_erased = 1;
}
-
+
command_print(cmd_ctx, "avr mass erase complete");
}
else
{
command_print(cmd_ctx, "avr mass erase failed");
}
-
+
LOG_DEBUG("%s", __FUNCTION__);
return ERROR_OK;
}
diff --git a/src/flash/lpc288x.c b/src/flash/lpc288x.c
index 29b7b81cd..152432e00 100644
--- a/src/flash/lpc288x.c
+++ b/src/flash/lpc288x.c
@@ -128,7 +128,7 @@ static u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout)
timeout--;
target_read_u32(target, F_STAT, &status);
}while (((status & FS_DONE) == 0) && timeout);
-
+
if(timeout == 0)
{
LOG_DEBUG("Timedout!");
@@ -143,31 +143,31 @@ static int lpc288x_read_part_info(struct flash_bank_s *bank)
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
target_t *target = bank->target;
u32 cidr;
-
+
int i = 0;
u32 offset;
-
+
if (lpc288x_info->cidr == 0x0102100A)
return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */
-
+
/* Read and parse chip identification register */
target_read_u32(target, DBGU_CIDR, &cidr);
-
+
if (cidr != 0x0102100A)
{
LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
lpc288x_info->cidr = cidr;
lpc288x_info->sector_size_break = 0x000F0000;
lpc288x_info->target_name = "LPC288x";
-
+
/* setup the sector info... */
offset = bank->base;
bank->num_sectors = 23;
bank->sectors = malloc(sizeof(flash_sector_t) * 23);
-
+
for (i = 0; i < 15; i++)
{
bank->sectors[i].offset = offset;
@@ -184,7 +184,7 @@ static int lpc288x_read_part_info(struct flash_bank_s *bank)
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
-
+
return ERROR_OK;
}
@@ -197,20 +197,20 @@ static int lpc288x_protect_check(struct flash_bank_s *bank)
static int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
lpc288x_flash_bank_t *lpc288x_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank LPC288x configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t));
bank->driver_priv = lpc288x_info;
-
+
/* part wasn't probed for info yet */
lpc288x_info->cidr = 0;
lpc288x_info->cclk = strtoul(args[6], NULL, 0);
-
+
return ERROR_OK;
}
@@ -230,9 +230,9 @@ static void lpc288x_set_flash_clk(struct flash_bank_s *bank)
/* AHB tcyc (in ns) 83 ns
* LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512
- * = 9412 (9500) (AN10548 9375)
+ * = 9412 (9500) (AN10548 9375)
* LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512
- * = 23 (75) (AN10548 72 - is this wrong?)
+ * = 23 (75) (AN10548 72 - is this wrong?)
* TODO: Sort out timing calcs ;) */
static void lpc288x_load_timer(int erase, struct target_s *target)
{
@@ -253,7 +253,7 @@ static u32 lpc288x_system_ready(struct flash_bank_s *bank)
{
return ERROR_FLASH_BANK_NOT_PROBED;
}
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -270,7 +270,7 @@ static int lpc288x_erase_check(struct flash_bank_s *bank)
LOG_INFO("Processor not halted/not probed");
return status;
}
-
+
return ERROR_OK;
}
@@ -279,33 +279,33 @@ static int lpc288x_erase(struct flash_bank_s *bank, int first, int last)
u32 status;
int sector;
target_t *target = bank->target;
-
+
status = lpc288x_system_ready(bank); /* probed? halted? */
if (status != ERROR_OK)
{
return status;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
LOG_INFO("Bad sector range");
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
/* Configure the flash controller timing */
lpc288x_set_flash_clk(bank);
-
+
for (sector = first; sector <= last; sector++)
{
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
lpc288x_load_timer(LOAD_TIMER_ERASE,target);
-
+
target_write_u32(target, bank->sectors[sector].offset, 0x00);
-
+
target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_CS);
}
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
@@ -323,17 +323,17 @@ static int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
u32 bytes_remaining = count;
u32 first_sector, last_sector, sector, page;
int i;
-
+
/* probed? halted? */
status = lpc288x_system_ready(bank);
if (status != ERROR_OK)
{
return status;
}
-
+
/* Initialise search indices */
first_sector = last_sector = 0xffffffff;
-
+
/* validate the write range... */
for (i = 0; i < bank->num_sectors; i++)
{
@@ -356,21 +356,21 @@ static int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
last_sector = i;
}
}
-
+
/* Range check... */
if (first_sector == 0xffffffff || last_sector == 0xffffffff)
{
LOG_INFO("Range check failed %x %x", offset, count);
return ERROR_FLASH_DST_OUT_OF_BANK;
}
-
+
/* Configure the flash controller timing */
lpc288x_set_flash_clk(bank);
-
+
/* initialise the offsets */
source_offset = 0;
dest_offset = 0;
-
+
for (sector = first_sector; sector <= last_sector; sector++)
{
for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++)
@@ -391,16 +391,16 @@ static int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
count = FLASH_PAGE_SIZE;
memcpy(page_buffer, &buffer[source_offset], count);
}
-
+
/* Wait for flash to become ready */
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* fill flash data latches with 1's */
target_write_u32(target, F_CTRL, FC_CS | FC_SET_DATA | FC_WEN | FC_FUNC);
-
+
target_write_u32(target, F_CTRL, FC_CS | FC_WEN | FC_FUNC);
/*would be better to use the clean target_write_buffer() interface but
* it seems not to be a LOT slower....
@@ -421,13 +421,13 @@ static int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
dest_offset += FLASH_PAGE_SIZE;
source_offset += count;
bytes_remaining -= count;
-
+
lpc288x_load_timer(LOAD_TIMER_WRITE, target);
-
+
target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | FC_CS);
}
}
-
+
return ERROR_OK;
}
@@ -436,18 +436,18 @@ static int lpc288x_probe(struct flash_bank_s *bank)
/* we only deal with LPC2888 so flash config is fixed */
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
int retval;
-
+
if (lpc288x_info->cidr != 0)
{
return ERROR_OK; /* already probed */
}
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
retval = lpc288x_read_part_info(bank);
if (retval != ERROR_OK)
return retval;
@@ -465,22 +465,22 @@ static int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int la
int lockregion, status;
u32 value;
target_t *target = bank->target;
-
+
/* probed? halted? */
- status = lpc288x_system_ready(bank);
+ status = lpc288x_system_ready(bank);
if (status != ERROR_OK)
{
return status;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
/* Configure the flash controller timing */
- lpc288x_set_flash_clk(bank);
-
+ lpc288x_set_flash_clk(bank);
+
for (lockregion = first; lockregion <= last; lockregion++)
{
if (set)
@@ -496,6 +496,6 @@ static int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int la
target_write_u32(target, bank->sectors[lockregion].offset, value);
target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | FC_CS);
}
-
+
return ERROR_OK;
}
diff --git a/src/flash/ocl.c b/src/flash/ocl.c
index e2099a119..b9028b1e8 100644
--- a/src/flash/ocl.c
+++ b/src/flash/ocl.c
@@ -108,13 +108,13 @@ static int ocl_erase(struct flash_bank_s *bank, int first, int last)
/* check preconditions */
if (bank->num_sectors == 0)
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
if (bank->target->state != TARGET_RUNNING)
{
LOG_ERROR("target has to be running to communicate with the loader");
return ERROR_TARGET_NOT_RUNNING;
}
-
+
if ((first == 0) && (last == bank->num_sectors - 1))
{
dcc_buffer[0] = OCL_ERASE_ALL;
@@ -168,7 +168,7 @@ static int ocl_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 coun
int byteofs;
int runlen;
u32 chksum;
-
+
int i;
/* check preconditions */
@@ -227,7 +227,7 @@ static int ocl_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 coun
chksum ^= *(dcc_bufptr++);
*(dcc_bufptr++) = chksum;
-
+
/* send the data */
if ((retval = embeddedice_send(ocl->jtag_info, dcc_buffer, dcc_bufptr-dcc_buffer)) != ERROR_OK)
{
@@ -292,7 +292,7 @@ static int ocl_probe(struct flash_bank_s *bank)
/* receive response */
if ((retval = embeddedice_receive(ocl->jtag_info, dcc_buffer, 1) != ERROR_OK))
return retval;
-
+
if (dcc_buffer[0] != OCL_CMD_DONE)
{
LOG_ERROR("loader response to OCL_PROBE 0x%08X", dcc_buffer[0]);
diff --git a/src/flash/stellaris.c b/src/flash/stellaris.c
index 001b0176c..97727909d 100644
--- a/src/flash/stellaris.c
+++ b/src/flash/stellaris.c
@@ -241,30 +241,30 @@ static char * StellarisClassname[5] =
static int stellaris_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
stellaris_flash_bank_t *stellaris_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank stellaris configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
stellaris_info = calloc(sizeof(stellaris_flash_bank_t), 1);
bank->base = 0x0;
bank->driver_priv = stellaris_info;
-
+
stellaris_info->target_name = "Unknown target";
-
+
/* part wasn't probed for info yet */
stellaris_info->did1 = 0;
-
- /* TODO Use an optional main oscillator clock rate in kHz from arg[6] */
+
+ /* TODO Use an optional main oscillator clock rate in kHz from arg[6] */
return ERROR_OK;
}
static int stellaris_register_commands(struct command_context_s *cmd_ctx)
{
command_t *stm32x_cmd = register_command(cmd_ctx, NULL, "stellaris", NULL, COMMAND_ANY, "stellaris flash specific commands");
-
+
register_command(cmd_ctx, stm32x_cmd, "mass_erase", stellaris_handle_mass_erase_command, COMMAND_EXEC, "mass erase device");
return ERROR_OK;
}
@@ -273,7 +273,7 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
{
int printed, device_class;
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
-
+
stellaris_read_part_info(bank);
if (stellaris_info->did1 == 0)
@@ -283,7 +283,7 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
buf_size -= printed;
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
if (DID0_VER(stellaris_info->did0) > 0)
{
device_class = (stellaris_info->did0>>16) & 0xFF;
@@ -291,14 +291,14 @@ static int stellaris_info(struct flash_bank_s *bank, char *buf, int buf_size)
else
{
device_class = 0;
- }
+ }
printed = snprintf(buf, buf_size, "\nLMI Stellaris information: Chip is class %i(%s) %s v%c.%i\n",
device_class, StellarisClassname[device_class], stellaris_info->target_name,
'A' + ((stellaris_info->did0>>8) & 0xFF), (stellaris_info->did0) & 0xFF);
buf += printed;
buf_size -= printed;
- printed = snprintf(buf, buf_size, "did1: 0x%8.8x, arch: 0x%4.4x, eproc: %s, ramsize:%ik, flashsize: %ik\n",
+ printed = snprintf(buf, buf_size, "did1: 0x%8.8x, arch: 0x%4.4x, eproc: %s, ramsize:%ik, flashsize: %ik\n",
stellaris_info->did1, stellaris_info->did1, "ARMV7M", (1+((stellaris_info->dc0>>16) & 0xFFFF))/4, (1+(stellaris_info->dc0 & 0xFFFF))*2);
buf += printed;
buf_size -= printed;
@@ -324,14 +324,14 @@ static u32 stellaris_get_flash_status(flash_bank_t *bank)
{
target_t *target = bank->target;
u32 fmc;
-
+
target_read_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, &fmc);
-
+
return fmc;
}
/** Read clock configuration and set stellaris_info->usec_clocks*/
-
+
static void stellaris_read_clock_info(flash_bank_t *bank)
{
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
@@ -344,7 +344,7 @@ static void stellaris_read_clock_info(flash_bank_t *bank)
target_read_u32(target, SCB_BASE|PLLCFG, &pllcfg);
LOG_DEBUG("Stellaris PLLCFG %x", pllcfg);
stellaris_info->rcc = rcc;
-
+
sysdiv = (rcc>>23) & 0xF;
usesysdiv = (rcc>>22) & 0x1;
bypass = (rcc>>11) & 0x1;
@@ -370,15 +370,15 @@ static void stellaris_read_clock_info(flash_bank_t *bank)
mainfreq = 0;
break;
}
-
+
if (!bypass)
mainfreq = 200000000; /* PLL out frec */
-
+
if (usesysdiv)
stellaris_info->mck_freq = mainfreq/(1+sysdiv);
else
stellaris_info->mck_freq = mainfreq;
-
+
/* Forget old flash timing */
stellaris_set_flash_mode(bank, 0);
}
@@ -390,7 +390,7 @@ static void stellaris_set_flash_mode(flash_bank_t *bank,int mode)
target_t *target = bank->target;
u32 usecrl = (stellaris_info->mck_freq/1000000ul-1);
- LOG_DEBUG("usecrl = %i",usecrl);
+ LOG_DEBUG("usecrl = %i",usecrl);
target_write_u32(target, SCB_BASE|USECRL, usecrl);
}
@@ -398,33 +398,33 @@ static void stellaris_set_flash_mode(flash_bank_t *bank,int mode)
static u32 stellaris_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
{
u32 status;
-
+
/* Stellaris waits for cmdbit to clear */
while (((status = stellaris_get_flash_status(bank)) & waitbits) && (timeout-- > 0))
{
LOG_DEBUG("status: 0x%x", status);
alive_sleep(1);
}
-
+
/* Flash errors are reflected in the FLASH_CRIS register */
return status;
}
/* Send one command to the flash controller */
-static int stellaris_flash_command(struct flash_bank_s *bank,u8 cmd,u16 pagen)
+static int stellaris_flash_command(struct flash_bank_s *bank,u8 cmd,u16 pagen)
{
u32 fmc;
target_t *target = bank->target;
- fmc = FMC_WRKEY | cmd;
+ fmc = FMC_WRKEY | cmd;
target_write_u32(target, FLASH_CONTROL_BASE|FLASH_FMC, fmc);
LOG_DEBUG("Flash command: 0x%x", fmc);
- if (stellaris_wait_status_busy(bank, cmd, 100))
+ if (stellaris_wait_status_busy(bank, cmd, 100))
{
return ERROR_FLASH_OPERATION_FAILED;
- }
+ }
return ERROR_OK;
}
@@ -437,7 +437,7 @@ static int stellaris_read_part_info(struct flash_bank_s *bank)
target_t *target = bank->target;
u32 did0, did1, ver, fam, status;
int i;
-
+
/* Read and parse chip identification register */
target_read_u32(target, SCB_BASE|DID0, &did0);
target_read_u32(target, SCB_BASE|DID1, &did1);
@@ -470,9 +470,9 @@ static int stellaris_read_part_info(struct flash_bank_s *bank)
if (StellarisParts[i].partno == ((did1 >> 16) & 0xFF))
break;
}
-
+
stellaris_info->target_name = StellarisParts[i].partname;
-
+
stellaris_info->did0 = did0;
stellaris_info->did1 = did1;
@@ -496,9 +496,9 @@ static int stellaris_read_part_info(struct flash_bank_s *bank)
/* Read main and master clock freqency register */
stellaris_read_clock_info(bank);
-
+
status = stellaris_get_flash_status(bank);
-
+
return ERROR_OK;
}
@@ -509,7 +509,7 @@ static int stellaris_read_part_info(struct flash_bank_s *bank)
static int stellaris_protect_check(struct flash_bank_s *bank)
{
u32 status;
-
+
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
if (bank->target->state != TARGET_HALTED)
@@ -528,10 +528,10 @@ static int stellaris_protect_check(struct flash_bank_s *bank)
LOG_WARNING("Cannot identify target as an AT91SAM");
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
status = stellaris_get_flash_status(bank);
stellaris_info->lockbits = status >> 16;
-
+
return ERROR_OK;
}
@@ -541,7 +541,7 @@ static int stellaris_erase(struct flash_bank_s *bank, int first, int last)
u32 flash_fmc, flash_cris;
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
target_t *target = bank->target;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -557,26 +557,26 @@ static int stellaris_erase(struct flash_bank_s *bank, int first, int last)
{
LOG_WARNING("Cannot identify target as Stellaris");
return ERROR_FLASH_OPERATION_FAILED;
- }
-
+ }
+
if ((first < 0) || (last < first) || (last >= (int)stellaris_info->num_pages))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
if ((first == 0) && (last == ((int)stellaris_info->num_pages-1)))
{
return stellaris_mass_erase(bank);
}
-
+
/* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
+ stellaris_read_clock_info(bank);
stellaris_set_flash_mode(bank,0);
/* Clear and disable flash programming interrupts */
target_write_u32(target, FLASH_CIM, 0);
target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
+
for (banknr = first; banknr <= last; banknr++)
{
/* Address is first word in page */
@@ -598,7 +598,7 @@ static int stellaris_erase(struct flash_bank_s *bank, int first, int last)
target_write_u32(target, FLASH_CRIS, 0);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
bank->sectors[banknr].is_erased = 1;
}
@@ -609,21 +609,21 @@ static int stellaris_protect(struct flash_bank_s *bank, int set, int first, int
{
u32 fmppe, flash_fmc, flash_cris;
int lockregion;
-
+
stellaris_flash_bank_t *stellaris_info = bank->driver_priv;
target_t *target = bank->target;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first < 0) || (last < first) || (last >= stellaris_info->num_lockbits))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
if (stellaris_info->did1 == 0)
{
stellaris_read_part_info(bank);
@@ -634,7 +634,7 @@ static int stellaris_protect(struct flash_bank_s *bank, int set, int first, int
LOG_WARNING("Cannot identify target as an Stellaris MCU");
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* Configure the flash controller timing */
stellaris_read_clock_info(bank);
stellaris_set_flash_mode(bank, 0);
@@ -643,15 +643,15 @@ static int stellaris_protect(struct flash_bank_s *bank, int set, int first, int
for (lockregion = first; lockregion <= last; lockregion++)
{
if (set)
- fmppe &= ~(1<<lockregion);
+ fmppe &= ~(1<<lockregion);
else
- fmppe |= (1<<lockregion);
+ fmppe |= (1<<lockregion);
}
/* Clear and disable flash programming interrupts */
target_write_u32(target, FLASH_CIM, 0);
target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
+
LOG_DEBUG("fmppe 0x%x",fmppe);
target_write_u32(target, SCB_BASE|FMPPE, fmppe);
/* Commit FMPPE */
@@ -675,21 +675,21 @@ static int stellaris_protect(struct flash_bank_s *bank, int set, int first, int
target_write_u32(target, FLASH_CRIS, 0);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
target_read_u32(target, SCB_BASE|FMPPE, &stellaris_info->lockbits);
-
+
return ERROR_OK;
}
-static u8 stellaris_write_code[] =
+static u8 stellaris_write_code[] =
{
-/*
- Call with :
+/*
+ Call with :
r0 = buffer address
r1 = destination address
- r2 = bytecount (in) - endaddr (work)
-
- Used registers:
+ r2 = bytecount (in) - endaddr (work)
+
+ Used registers:
r3 = pFLASH_CTRL_BASE
r4 = FLASHWRITECMD
r5 = #1
@@ -731,7 +731,7 @@ static int stellaris_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offs
reg_param_t reg_params[3];
armv7m_algorithm_t armv7m_info;
int retval = ERROR_OK;
-
+
LOG_DEBUG("(bank=%p buffer=%p offset=%08X wcount=%08X)",
bank, buffer, offset, wcount);
@@ -748,32 +748,32 @@ static int stellaris_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offs
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
LOG_DEBUG("called target_alloc_working_area(target=%p buffer_size=%08X source=%p)",
- target, buffer_size, source);
+ target, buffer_size, source);
buffer_size /= 2;
if (buffer_size <= 256)
{
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (write_algorithm)
target_free_working_area(target, write_algorithm);
-
+
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
-
+
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
-
+
while (wcount > 0)
{
u32 thisrun_count = (wcount > (buffer_size / 4)) ? (buffer_size / 4) : wcount;
-
+
target_write_buffer(target, source->address, thisrun_count * 4, buffer);
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, 4*thisrun_count);
@@ -785,19 +785,19 @@ static int stellaris_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offs
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
buffer += thisrun_count * 4;
address += thisrun_count * 4;
wcount -= thisrun_count;
}
-
+
target_free_working_area(target, write_algorithm);
target_free_working_area(target, source);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
-
+
return retval;
}
@@ -811,7 +811,7 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
u32 bytes_remaining = (count & 0x00000003);
u32 bytes_written = 0;
int retval;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -831,26 +831,26 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
LOG_WARNING("Cannot identify target as a Stellaris processor");
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
if (offset & 0x3)
{
LOG_WARNING("offset size must be word aligned");
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
-
+
if (offset + count > bank->size)
return ERROR_FLASH_DST_OUT_OF_BANK;
- /* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
+ /* Configure the flash controller timing */
+ stellaris_read_clock_info(bank);
stellaris_set_flash_mode(bank, 0);
-
+
/* Clear and disable flash programming interrupts */
target_write_u32(target, FLASH_CIM, 0);
target_write_u32(target, FLASH_MISC, PMISC|AMISC);
/* multiple words to be programmed? */
- if (words_remaining > 0)
+ if (words_remaining > 0)
{
/* try using a block write */
if ((retval = stellaris_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
@@ -858,14 +858,14 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
/* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
+ * we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
else if (retval == ERROR_FLASH_OPERATION_FAILED)
{
/* if an error occured, we examine the reason, and quit */
target_read_u32(target, FLASH_CRIS, &flash_cris);
-
+
LOG_ERROR("flash writing failed with CRIS: 0x%x", flash_cris);
return ERROR_FLASH_OPERATION_FAILED;
}
@@ -877,12 +877,12 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
words_remaining = 0;
}
}
-
+
while (words_remaining > 0)
{
if (!(address & 0xff))
LOG_DEBUG("0x%x", address);
-
+
/* Program one word */
target_write_u32(target, FLASH_FMA, address);
target_write_buffer(target, FLASH_FMD, 4, buffer);
@@ -893,27 +893,27 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
{
target_read_u32(target, FLASH_FMC, &flash_fmc);
} while (flash_fmc & FMC_WRITE);
-
+
buffer += 4;
address += 4;
words_remaining--;
}
-
+
if (bytes_remaining)
{
u8 last_word[4] = {0xff, 0xff, 0xff, 0xff};
int i = 0;
-
+
while(bytes_remaining > 0)
{
- last_word[i++] = *(buffer + bytes_written);
+ last_word[i++] = *(buffer + bytes_written);
bytes_remaining--;
bytes_written++;
}
-
+
if (!(address & 0xff))
LOG_DEBUG("0x%x", address);
-
+
/* Program one word */
target_write_u32(target, FLASH_FMA, address);
target_write_buffer(target, FLASH_FMD, 4, last_word);
@@ -925,7 +925,7 @@ static int stellaris_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u3
target_read_u32(target, FLASH_FMC, &flash_fmc);
} while (flash_fmc & FMC_WRITE);
}
-
+
/* Check access violations */
target_read_u32(target, FLASH_CRIS, &flash_cris);
if (flash_cris & (AMASK))
@@ -941,7 +941,7 @@ static int stellaris_probe(struct flash_bank_s *bank)
/* we can't probe on an stellaris
* if this is an stellaris, it has the configured flash
*/
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -965,35 +965,35 @@ static int stellaris_mass_erase(struct flash_bank_s *bank)
target_t *target = NULL;
stellaris_flash_bank_t *stellaris_info = NULL;
u32 flash_fmc;
-
+
stellaris_info = bank->driver_priv;
target = bank->target;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (stellaris_info->did1 == 0)
{
stellaris_read_part_info(bank);
}
-
+
if (stellaris_info->did1 == 0)
{
LOG_WARNING("Cannot identify target as Stellaris");
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* Configure the flash controller timing */
- stellaris_read_clock_info(bank);
+ stellaris_read_clock_info(bank);
stellaris_set_flash_mode(bank, 0);
/* Clear and disable flash programming interrupts */
target_write_u32(target, FLASH_CIM, 0);
target_write_u32(target, FLASH_MISC, PMISC|AMISC);
-
+
target_write_u32(target, FLASH_FMA, 0);
target_write_u32(target, FLASH_FMC, FMC_WRKEY | FMC_MERASE);
/* Wait until erase complete */
@@ -1002,7 +1002,7 @@ static int stellaris_mass_erase(struct flash_bank_s *bank)
target_read_u32(target, FLASH_FMC, &flash_fmc);
}
while (flash_fmc & FMC_MERASE);
-
+
/* if device has > 128k, then second erase cycle is needed
* this is only valid for older devices, but will not hurt */
if (stellaris_info->num_pages * stellaris_info->pagesize > 0x20000)
@@ -1016,7 +1016,7 @@ static int stellaris_mass_erase(struct flash_bank_s *bank)
}
while (flash_fmc & FMC_MERASE);
}
-
+
return ERROR_OK;
}
@@ -1024,20 +1024,20 @@ static int stellaris_handle_mass_erase_command(struct command_context_s *cmd_ctx
{
flash_bank_t *bank;
int i;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "stellaris mass_erase <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
if (stellaris_mass_erase(bank) == ERROR_OK)
{
/* set all sectors as erased */
@@ -1045,13 +1045,13 @@ static int stellaris_handle_mass_erase_command(struct command_context_s *cmd_ctx
{
bank->sectors[i].is_erased = 1;
}
-
+
command_print(cmd_ctx, "stellaris mass erase complete");
}
else
{
command_print(cmd_ctx, "stellaris mass erase failed");
}
-
+
return ERROR_OK;
}
diff --git a/src/flash/stm32x.c b/src/flash/stm32x.c
index 1f3460b1c..b0d697677 100644
--- a/src/flash/stm32x.c
+++ b/src/flash/stm32x.c
@@ -65,7 +65,7 @@ flash_driver_t stm32x_flash =
static int stm32x_register_commands(struct command_context_s *cmd_ctx)
{
command_t *stm32x_cmd = register_command(cmd_ctx, NULL, "stm32x", NULL, COMMAND_ANY, "stm32x flash specific commands");
-
+
register_command(cmd_ctx, stm32x_cmd, "lock", stm32x_handle_lock_command, COMMAND_EXEC,
"lock device");
register_command(cmd_ctx, stm32x_cmd, "unlock", stm32x_handle_unlock_command, COMMAND_EXEC,
@@ -84,19 +84,19 @@ static int stm32x_register_commands(struct command_context_s *cmd_ctx)
static int stm32x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
stm32x_flash_bank_t *stm32x_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank stm32x configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
stm32x_info = malloc(sizeof(stm32x_flash_bank_t));
bank->driver_priv = stm32x_info;
-
+
stm32x_info->write_algorithm = NULL;
stm32x_info->probed = 0;
-
+
return ERROR_OK;
}
@@ -104,9 +104,9 @@ static u32 stm32x_get_flash_status(flash_bank_t *bank)
{
target_t *target = bank->target;
u32 status;
-
+
target_read_u32(target, STM32_FLASH_SR, &status);
-
+
return status;
}
@@ -114,7 +114,7 @@ static u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout)
{
target_t *target = bank->target;
u32 status;
-
+
/* wait for busy to clear */
while (((status = stm32x_get_flash_status(bank)) & FLASH_BSY) && (timeout-- > 0))
{
@@ -124,7 +124,7 @@ static u32 stm32x_wait_status_busy(flash_bank_t *bank, int timeout)
/* Clear but report errors */
if (status & (FLASH_WRPRTERR|FLASH_PGERR))
{
- target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR|FLASH_PGERR);
+ target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR|FLASH_PGERR);
}
return status;
}
@@ -134,26 +134,26 @@ static int stm32x_read_options(struct flash_bank_s *bank)
u32 optiondata;
stm32x_flash_bank_t *stm32x_info = NULL;
target_t *target = bank->target;
-
+
stm32x_info = bank->driver_priv;
-
+
/* read current option bytes */
target_read_u32(target, STM32_FLASH_OBR, &optiondata);
-
+
stm32x_info->option_bytes.user_options = (u16)0xFFF8|((optiondata >> 2) & 0x07);
stm32x_info->option_bytes.RDP = (optiondata & (1 << OPT_READOUT)) ? 0xFFFF : 0x5AA5;
-
+
if (optiondata & (1 << OPT_READOUT))
LOG_INFO("Device Security Bit Set");
-
+
/* each bit refers to a 4bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &optiondata);
-
+
stm32x_info->option_bytes.protection[0] = (u16)optiondata;
stm32x_info->option_bytes.protection[1] = (u16)(optiondata >> 8);
stm32x_info->option_bytes.protection[2] = (u16)(optiondata >> 16);
stm32x_info->option_bytes.protection[3] = (u16)(optiondata >> 24);
-
+
return ERROR_OK;
}
@@ -162,35 +162,35 @@ static int stm32x_erase_options(struct flash_bank_s *bank)
stm32x_flash_bank_t *stm32x_info = NULL;
target_t *target = bank->target;
u32 status;
-
+
stm32x_info = bank->driver_priv;
-
+
/* read current options */
stm32x_read_options(bank);
-
+
/* unlock flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
+
/* unlock option flash registers */
target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
-
+
/* erase option bytes */
target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_OPTWRE);
target_write_u32(target, STM32_FLASH_CR, FLASH_OPTER|FLASH_STRT|FLASH_OPTWRE);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* clear readout protection and complementary option bytes
* this will also force a device unlock if set */
stm32x_info->option_bytes.RDP = 0x5AA5;
-
+
return ERROR_OK;
}
@@ -199,82 +199,82 @@ static int stm32x_write_options(struct flash_bank_s *bank)
stm32x_flash_bank_t *stm32x_info = NULL;
target_t *target = bank->target;
u32 status;
-
+
stm32x_info = bank->driver_priv;
-
+
/* unlock flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
+
/* unlock option flash registers */
target_write_u32(target, STM32_FLASH_OPTKEYR, KEY1);
target_write_u32(target, STM32_FLASH_OPTKEYR, KEY2);
-
+
/* program option bytes */
target_write_u32(target, STM32_FLASH_CR, FLASH_OPTPG|FLASH_OPTWRE);
-
+
/* write user option byte */
target_write_u16(target, STM32_OB_USER, stm32x_info->option_bytes.user_options);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* write protection byte 1 */
target_write_u16(target, STM32_OB_WRP0, stm32x_info->option_bytes.protection[0]);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* write protection byte 2 */
target_write_u16(target, STM32_OB_WRP1, stm32x_info->option_bytes.protection[1]);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* write protection byte 3 */
target_write_u16(target, STM32_OB_WRP2, stm32x_info->option_bytes.protection[2]);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* write protection byte 4 */
target_write_u16(target, STM32_OB_WRP3, stm32x_info->option_bytes.protection[3]);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
/* write readout protection bit */
target_write_u16(target, STM32_OB_RDP, stm32x_info->option_bytes.RDP);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
return ERROR_FLASH_OPERATION_FAILED;
-
+
target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
+
return ERROR_OK;
}
@@ -282,70 +282,70 @@ static int stm32x_protect_check(struct flash_bank_s *bank)
{
target_t *target = bank->target;
stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
-
+
u32 protection;
int i, s;
int num_bits;
int set;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
- /* medium density - each bit refers to a 4bank protection
+
+ /* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &protection);
-
+
/* medium density - each protection bit is for 4 * 1K pages
* high density - each protection bit is for 2 * 2K pages */
num_bits = (bank->num_sectors / stm32x_info->ppage_size);
-
+
if (stm32x_info->ppage_size == 2)
{
/* high density flash */
-
+
set = 1;
-
+
if (protection & (1 << 31))
set = 0;
-
- /* bit 31 controls sector 62 - 255 protection */
+
+ /* bit 31 controls sector 62 - 255 protection */
for (s = 62; s < bank->num_sectors; s++)
{
bank->sectors[s].is_protected = set;
}
-
+
if (bank->num_sectors > 61)
num_bits = 31;
-
+
for (i = 0; i < num_bits; i++)
{
set = 1;
-
+
if (protection & (1 << i))
set = 0;
-
+
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
else
- {
+ {
/* medium density flash */
for (i = 0; i < num_bits; i++)
{
set = 1;
-
+
if( protection & (1 << i))
set = 0;
-
+
for (s = 0; s < stm32x_info->ppage_size; s++)
bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
}
-
+
return ERROR_OK;
}
@@ -354,30 +354,30 @@ static int stm32x_erase(struct flash_bank_s *bank, int first, int last)
target_t *target = bank->target;
int i;
u32 status;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first == 0) && (last == (bank->num_sectors - 1)))
{
return stm32x_mass_erase(bank);
}
-
+
/* unlock flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
+
for (i = first; i <= last; i++)
- {
+ {
target_write_u32(target, STM32_FLASH_CR, FLASH_PER);
target_write_u32(target, STM32_FLASH_AR, bank->base + bank->sectors[i].offset);
target_write_u32(target, STM32_FLASH_CR, FLASH_PER|FLASH_STRT);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
if( status & FLASH_WRPRTERR )
return ERROR_FLASH_OPERATION_FAILED;
if( status & FLASH_PGERR )
@@ -386,7 +386,7 @@ static int stm32x_erase(struct flash_bank_s *bank, int first, int last)
}
target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
+
return ERROR_OK;
}
@@ -398,34 +398,34 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las
int i, reg, bit;
int status;
u32 protection;
-
+
stm32x_info = bank->driver_priv;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first && (first % stm32x_info->ppage_size)) || ((last + 1) && (last + 1) % stm32x_info->ppage_size))
{
LOG_WARNING("sector start/end incorrect - stm32 has %dK sector protection", stm32x_info->ppage_size);
return ERROR_FLASH_SECTOR_INVALID;
}
-
- /* medium density - each bit refers to a 4bank protection
+
+ /* medium density - each bit refers to a 4bank protection
* high density - each bit refers to a 2bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &protection);
-
+
prot_reg[0] = (u16)protection;
prot_reg[1] = (u16)(protection >> 8);
prot_reg[2] = (u16)(protection >> 16);
prot_reg[3] = (u16)(protection >> 24);
-
+
if (stm32x_info->ppage_size == 2)
{
/* high density flash */
-
+
/* bit 7 controls sector 62 - 255 protection */
if (last > 61)
{
@@ -434,17 +434,17 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las
else
prot_reg[3] |= (1 << 7);
}
-
+
if (first > 61)
first = 62;
if (last > 61)
last = 61;
-
+
for (i = first; i <= last; i++)
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
-
+
if( set )
prot_reg[reg] &= ~(1 << bit);
else
@@ -458,22 +458,22 @@ static int stm32x_protect(struct flash_bank_s *bank, int set, int first, int las
{
reg = (i / stm32x_info->ppage_size) / 8;
bit = (i / stm32x_info->ppage_size) - (reg * 8);
-
+
if( set )
prot_reg[reg] &= ~(1 << bit);
else
prot_reg[reg] |= (1 << bit);
}
}
-
+
if ((status = stm32x_erase_options(bank)) != ERROR_OK)
return status;
-
+
stm32x_info->option_bytes.protection[0] = prot_reg[0];
stm32x_info->option_bytes.protection[1] = prot_reg[1];
stm32x_info->option_bytes.protection[2] = prot_reg[2];
stm32x_info->option_bytes.protection[3] = prot_reg[3];
-
+
return stm32x_write_options(bank);
}
@@ -487,7 +487,7 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset,
reg_param_t reg_params[4];
armv7m_algorithm_t armv7m_info;
int retval = ERROR_OK;
-
+
u8 stm32x_flash_write_code[] = {
/* write: */
0xDF, 0xF8, 0x24, 0x40, /* ldr r4, STM32_FLASH_CR */
@@ -509,14 +509,14 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset,
0x10, 0x20, 0x02, 0x40, /* STM32_FLASH_CR: .word 0x40022010 */
0x0C, 0x20, 0x02, 0x40 /* STM32_FLASH_SR: .word 0x4002200C */
};
-
+
/* flash write code */
if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code), &stm32x_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
-
+
if ((retval=target_write_buffer(target, stm32x_info->write_algorithm->address, sizeof(stm32x_flash_write_code), stm32x_flash_write_code))!=ERROR_OK)
return retval;
@@ -529,31 +529,31 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset,
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (stm32x_info->write_algorithm)
target_free_working_area(target, stm32x_info->write_algorithm);
-
+
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
-
+
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARMV7M_MODE_ANY;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN);
-
+
while (count > 0)
{
u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
-
+
if ((retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer))!=ERROR_OK)
break;
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
-
+
if ((retval = target_run_algorithm(target, 0, NULL, 4, reg_params, stm32x_info->write_algorithm->address, \
stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
{
@@ -561,38 +561,38 @@ static int stm32x_write_block(struct flash_bank_s *bank, u8 *buffer, u32 offset,
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_PGERR)
{
LOG_ERROR("flash memory not erased before writing");
/* Clear but report errors */
- target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR);
+ target_write_u32(target, STM32_FLASH_SR, FLASH_PGERR);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
if (buf_get_u32(reg_params[3].value, 0, 32) & FLASH_WRPRTERR)
{
LOG_ERROR("flash memory write protected");
/* Clear but report errors */
- target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR);
+ target_write_u32(target, STM32_FLASH_SR, FLASH_WRPRTERR);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
-
+
target_free_working_area(target, source);
target_free_working_area(target, stm32x_info->write_algorithm);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
-
+
return retval;
}
@@ -605,7 +605,7 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
u32 bytes_written = 0;
u8 status;
int retval;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -617,13 +617,13 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
LOG_WARNING("offset 0x%x breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
-
+
/* unlock flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
+
/* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0)
+ if (words_remaining > 0)
{
/* try using a block write */
if ((retval = stm32x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
@@ -631,7 +631,7 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
/* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
+ * we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
else if (retval == ERROR_FLASH_OPERATION_FAILED)
@@ -655,9 +655,9 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
target_write_u16(target, address, value);
-
+
status = stm32x_wait_status_busy(bank, 5);
-
+
if( status & FLASH_WRPRTERR )
{
LOG_ERROR("flash memory not erased before writing");
@@ -673,7 +673,7 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
words_remaining--;
address += 2;
}
-
+
if (bytes_remaining)
{
u16 value = 0xffff;
@@ -681,9 +681,9 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
target_write_u32(target, STM32_FLASH_CR, FLASH_PG);
target_write_u16(target, address, value);
-
+
status = stm32x_wait_status_busy(bank, 5);
-
+
if( status & FLASH_WRPRTERR )
{
LOG_ERROR("flash memory not erased before writing");
@@ -695,9 +695,9 @@ static int stm32x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 c
return ERROR_FLASH_OPERATION_FAILED;
}
}
-
+
target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
+
return ERROR_OK;
}
@@ -709,7 +709,7 @@ static int stm32x_probe(struct flash_bank_s *bank)
u16 num_pages;
u32 device_id;
int page_size;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -717,25 +717,25 @@ static int stm32x_probe(struct flash_bank_s *bank)
}
stm32x_info->probed = 0;
-
+
/* read stm32 device id register */
target_read_u32(target, 0xE0042000, &device_id);
LOG_INFO( "device id = 0x%08x", device_id );
-
+
/* get flash size from target */
if (target_read_u16(target, 0x1FFFF7E0, &num_pages) != ERROR_OK)
{
/* failed reading flash size, default to max target family */
num_pages = 0xffff;
}
-
+
if ((device_id & 0x7ff) == 0x410)
{
/* medium density - we have 1k pages
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
+
/* check for early silicon */
if (num_pages == 0xffff)
{
@@ -750,7 +750,7 @@ static int stm32x_probe(struct flash_bank_s *bank)
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
+
/* check for early silicon */
if (num_pages == 0xffff)
{
@@ -765,7 +765,7 @@ static int stm32x_probe(struct flash_bank_s *bank)
* 2 pages for a protection area */
page_size = 2048;
stm32x_info->ppage_size = 2;
-
+
/* check for early silicon */
if (num_pages == 0xffff)
{
@@ -780,7 +780,7 @@ static int stm32x_probe(struct flash_bank_s *bank)
* 4 pages for a protection area */
page_size = 1024;
stm32x_info->ppage_size = 4;
-
+
/* check for early silicon */
if (num_pages == 0xffff)
{
@@ -794,17 +794,17 @@ static int stm32x_probe(struct flash_bank_s *bank)
LOG_WARNING( "Cannot identify target as a STM32 family." );
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
LOG_INFO( "flash size = %dkbytes", num_pages );
-
+
/* calculate numbers of pages */
num_pages /= (page_size / 1024);
-
+
bank->base = 0x08000000;
bank->size = (num_pages * page_size);
bank->num_sectors = num_pages;
bank->sectors = malloc(sizeof(flash_sector_t) * num_pages);
-
+
for (i = 0; i < num_pages; i++)
{
bank->sectors[i].offset = i * page_size;
@@ -812,9 +812,9 @@ static int stm32x_probe(struct flash_bank_s *bank)
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
-
+
stm32x_info->probed = 1;
-
+
return ERROR_OK;
}
@@ -838,34 +838,34 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
target_t *target = bank->target;
u32 device_id;
int printed;
-
+
/* read stm32 device id register */
target_read_u32(target, 0xE0042000, &device_id);
-
+
if ((device_id & 0x7ff) == 0x410)
{
printed = snprintf(buf, buf_size, "stm32x (Medium Density) - Rev: ");
buf += printed;
buf_size -= printed;
-
+
switch(device_id >> 16)
{
case 0x0000:
snprintf(buf, buf_size, "A");
break;
-
+
case 0x2000:
snprintf(buf, buf_size, "B");
break;
-
+
case 0x2001:
snprintf(buf, buf_size, "Z");
break;
-
+
case 0x2003:
snprintf(buf, buf_size, "Y");
break;
-
+
default:
snprintf(buf, buf_size, "unknown");
break;
@@ -876,13 +876,13 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
printed = snprintf(buf, buf_size, "stm32x (Low Density) - Rev: ");
buf += printed;
buf_size -= printed;
-
+
switch(device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
-
+
default:
snprintf(buf, buf_size, "unknown");
break;
@@ -893,17 +893,17 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
printed = snprintf(buf, buf_size, "stm32x (High Density) - Rev: ");
buf += printed;
buf_size -= printed;
-
+
switch(device_id >> 16)
{
case 0x1000:
snprintf(buf, buf_size, "A");
break;
-
+
case 0x1001:
snprintf(buf, buf_size, "Z");
break;
-
+
default:
snprintf(buf, buf_size, "unknown");
break;
@@ -914,7 +914,7 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
printed = snprintf(buf, buf_size, "stm32x (Connectivity) - Rev: ");
buf += printed;
buf_size -= printed;
-
+
switch(device_id >> 16)
{
case 0x1000:
@@ -931,7 +931,7 @@ static int stm32x_info(struct flash_bank_s *bank, char *buf, int buf_size)
snprintf(buf, buf_size, "Cannot identify target as a stm32x\n");
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
return ERROR_OK;
}
@@ -940,47 +940,47 @@ static int stm32x_handle_lock_command(struct command_context_s *cmd_ctx, char *c
flash_bank_t *bank;
target_t *target = NULL;
stm32x_flash_bank_t *stm32x_info = NULL;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "stm32x lock <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
stm32x_info = bank->driver_priv;
-
+
target = bank->target;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to erase options");
return ERROR_OK;
}
-
- /* set readout protection */
+
+ /* set readout protection */
stm32x_info->option_bytes.RDP = 0;
-
+
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to lock device");
return ERROR_OK;
}
-
+
command_print(cmd_ctx, "stm32x locked");
-
+
return ERROR_OK;
}
@@ -989,44 +989,44 @@ static int stm32x_handle_unlock_command(struct command_context_s *cmd_ctx, char
flash_bank_t *bank;
target_t *target = NULL;
stm32x_flash_bank_t *stm32x_info = NULL;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "stm32x unlock <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
stm32x_info = bank->driver_priv;
-
+
target = bank->target;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to unlock device");
return ERROR_OK;
}
-
+
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to lock device");
return ERROR_OK;
}
-
+
command_print(cmd_ctx, "stm32x unlocked");
-
+
return ERROR_OK;
}
@@ -1036,56 +1036,56 @@ static int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx,
u32 optionbyte;
target_t *target = NULL;
stm32x_flash_bank_t *stm32x_info = NULL;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "stm32x options_read <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
stm32x_info = bank->driver_priv;
-
+
target = bank->target;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
target_read_u32(target, STM32_FLASH_OBR, &optionbyte);
command_print(cmd_ctx, "Option Byte: 0x%x", optionbyte);
-
+
if (buf_get_u32((u8*)&optionbyte, OPT_ERROR, 1))
command_print(cmd_ctx, "Option Byte Complement Error");
-
+
if (buf_get_u32((u8*)&optionbyte, OPT_READOUT, 1))
command_print(cmd_ctx, "Readout Protection On");
else
command_print(cmd_ctx, "Readout Protection Off");
-
+
if (buf_get_u32((u8*)&optionbyte, OPT_RDWDGSW, 1))
command_print(cmd_ctx, "Software Watchdog");
else
command_print(cmd_ctx, "Hardware Watchdog");
-
+
if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTOP, 1))
command_print(cmd_ctx, "Stop: No reset generated");
else
command_print(cmd_ctx, "Stop: Reset generated");
-
+
if (buf_get_u32((u8*)&optionbyte, OPT_RDRSTSTDBY, 1))
command_print(cmd_ctx, "Standby: No reset generated");
else
command_print(cmd_ctx, "Standby: Reset generated");
-
+
return ERROR_OK;
}
@@ -1095,30 +1095,30 @@ static int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx
target_t *target = NULL;
stm32x_flash_bank_t *stm32x_info = NULL;
u16 optionbyte = 0xF8;
-
+
if (argc < 4)
{
command_print(cmd_ctx, "stm32x options_write <bank> <SWWDG|HWWDG> <RSTSTNDBY|NORSTSTNDBY> <RSTSTOP|NORSTSTOP>");
return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
stm32x_info = bank->driver_priv;
-
+
target = bank->target;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
if (strcmp(args[1], "SWWDG") == 0)
{
optionbyte |= (1<<0);
@@ -1127,7 +1127,7 @@ static int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx
{
optionbyte &= ~(1<<0);
}
-
+
if (strcmp(args[2], "NORSTSTNDBY") == 0)
{
optionbyte |= (1<<1);
@@ -1136,7 +1136,7 @@ static int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx
{
optionbyte &= ~(1<<1);
}
-
+
if (strcmp(args[3], "NORSTSTOP") == 0)
{
optionbyte |= (1<<2);
@@ -1145,23 +1145,23 @@ static int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx
{
optionbyte &= ~(1<<2);
}
-
+
if (stm32x_erase_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to erase options");
return ERROR_OK;
}
-
+
stm32x_info->option_bytes.user_options = optionbyte;
-
+
if (stm32x_write_options(bank) != ERROR_OK)
{
command_print(cmd_ctx, "stm32x failed to write options");
return ERROR_OK;
}
-
+
command_print(cmd_ctx, "stm32x write options complete");
-
+
return ERROR_OK;
}
@@ -1169,37 +1169,37 @@ static int stm32x_mass_erase(struct flash_bank_s *bank)
{
target_t *target = bank->target;
u32 status;
-
+
if (target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
/* unlock option flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
-
+
/* mass erase flash memory */
target_write_u32(target, STM32_FLASH_CR, FLASH_MER);
target_write_u32(target, STM32_FLASH_CR, FLASH_MER|FLASH_STRT);
-
+
status = stm32x_wait_status_busy(bank, 10);
-
+
target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
-
+
if( status & FLASH_WRPRTERR )
{
LOG_ERROR("stm32x device protected");
return ERROR_OK;
}
-
+
if( status & FLASH_PGERR )
{
LOG_ERROR("stm32x device programming failed");
return ERROR_OK;
}
-
+
return ERROR_OK;
}
@@ -1207,20 +1207,20 @@ static int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, c
{
flash_bank_t *bank;
int i;
-
+
if (argc < 1)
{
command_print(cmd_ctx, "stm32x mass_erase <bank>");
- return ERROR_OK;
+ return ERROR_OK;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
if (stm32x_mass_erase(bank) == ERROR_OK)
{
/* set all sectors as erased */
@@ -1228,13 +1228,13 @@ static int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, c
{
bank->sectors[i].is_erased = 1;
}
-
+
command_print(cmd_ctx, "stm32x mass erase complete");
}
else
{
command_print(cmd_ctx, "stm32x mass erase failed");
}
-
+
return ERROR_OK;
}
diff --git a/src/flash/str9x.c b/src/flash/str9x.c
index 3566bf9c6..b9490656c 100644
--- a/src/flash/str9x.c
+++ b/src/flash/str9x.c
@@ -63,26 +63,26 @@ flash_driver_t str9x_flash =
static int str9x_register_commands(struct command_context_s *cmd_ctx)
{
command_t *str9x_cmd = register_command(cmd_ctx, NULL, "str9x", NULL, COMMAND_ANY, NULL);
-
+
register_command(cmd_ctx, str9x_cmd, "flash_config", str9x_handle_flash_config_command, COMMAND_EXEC,
"configure str9 flash controller");
-
+
return ERROR_OK;
}
static int str9x_build_block_list(struct flash_bank_s *bank)
{
str9x_flash_bank_t *str9x_info = bank->driver_priv;
-
+
int i;
int num_sectors;
int b0_sectors = 0, b1_sectors = 0;
u32 offset = 0;
-
+
/* set if we have large flash str9 */
str9x_info->variant = 0;
str9x_info->bank1 = 0;
-
+
switch (bank->size)
{
case (256 * 1024):
@@ -116,15 +116,15 @@ static int str9x_build_block_list(struct flash_bank_s *bank)
LOG_ERROR("BUG: unknown bank->size encountered");
exit(-1);
}
-
+
num_sectors = b0_sectors + b1_sectors;
-
+
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
str9x_info->sector_bits = malloc(sizeof(u32) * num_sectors);
-
+
num_sectors = 0;
-
+
for (i = 0; i < b0_sectors; i++)
{
bank->sectors[num_sectors].offset = offset;
@@ -147,7 +147,7 @@ static int str9x_build_block_list(struct flash_bank_s *bank)
else
str9x_info->sector_bits[num_sectors++] = (1<<(i+8));
}
-
+
return ERROR_OK;
}
@@ -157,20 +157,20 @@ static int str9x_flash_bank_command(struct command_context_s *cmd_ctx,
char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
str9x_flash_bank_t *str9x_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank str9x configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
str9x_info = malloc(sizeof(str9x_flash_bank_t));
bank->driver_priv = str9x_info;
-
+
str9x_build_block_list(bank);
-
+
str9x_info->write_algorithm = NULL;
-
+
return ERROR_OK;
}
@@ -179,7 +179,7 @@ static int str9x_protect_check(struct flash_bank_s *bank)
int retval;
str9x_flash_bank_t *str9x_info = bank->driver_priv;
target_t *target = bank->target;
-
+
int i;
u32 adr;
u32 status = 0;
@@ -192,7 +192,7 @@ static int str9x_protect_check(struct flash_bank_s *bank)
}
/* read level one protection */
-
+
if (str9x_info->variant)
{
if (str9x_info->bank1)
@@ -234,13 +234,13 @@ static int str9x_protect_check(struct flash_bank_s *bank)
}
status = hstatus;
}
-
+
/* read array command */
if ((retval=target_write_u16(target, adr, 0xFF))!=ERROR_OK)
{
return retval;
}
-
+
for (i = 0; i < bank->num_sectors; i++)
{
if (status & str9x_info->sector_bits[i])
@@ -248,7 +248,7 @@ static int str9x_protect_check(struct flash_bank_s *bank)
else
bank->sectors[i].is_protected = 0;
}
-
+
return ERROR_OK;
}
@@ -259,7 +259,7 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
u32 adr;
u8 status;
u8 erase_cmd;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -277,12 +277,12 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
/* Erase sector command */
erase_cmd = 0x20;
}
-
+
for (i = first; i <= last; i++)
{
int retval;
adr = bank->base + bank->sectors[i].offset;
-
+
/* erase sectors */
if ((retval=target_write_u16(target, adr, erase_cmd))!=ERROR_OK)
{
@@ -292,14 +292,14 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
{
return retval;
}
-
+
/* get status */
if ((retval=target_write_u16(target, adr, 0x70))!=ERROR_OK)
{
return retval;
}
- int timeout;
+ int timeout;
for (timeout=0; timeout<1000; timeout++) {
if ((retval=target_read_u8(target, adr, &status))!=ERROR_OK)
{
@@ -314,30 +314,30 @@ static int str9x_erase(struct flash_bank_s *bank, int first, int last)
LOG_ERROR("erase timed out");
return ERROR_FAIL;
}
-
+
/* clear status, also clear read array */
if ((retval=target_write_u16(target, adr, 0x50))!=ERROR_OK)
{
return retval;
}
-
+
/* read array command */
if ((retval=target_write_u16(target, adr, 0xFF))!=ERROR_OK)
{
return retval;
}
-
+
if( status & 0x22 )
{
LOG_ERROR("error erasing flash bank, status: 0x%x", status);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* If we ran erase bank command, we are finished */
if (erase_cmd == 0x80)
break;
}
-
+
for (i = first; i <= last; i++)
bank->sectors[i].is_erased = 1;
@@ -351,35 +351,35 @@ static int str9x_protect(struct flash_bank_s *bank,
int i;
u32 adr;
u8 status;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
for (i = first; i <= last; i++)
{
/* Level One Protection */
-
+
adr = bank->base + bank->sectors[i].offset;
-
+
target_write_u16(target, adr, 0x60);
if( set )
target_write_u16(target, adr, 0x01);
else
target_write_u16(target, adr, 0xD0);
-
+
/* query status */
target_read_u8(target, adr, &status);
-
+
/* clear status, also clear read array */
target_write_u16(target, adr, 0x50);
-
+
/* read array command */
target_write_u16(target, adr, 0xFF);
}
-
+
return ERROR_OK;
}
@@ -394,7 +394,7 @@ static int str9x_write_block(struct flash_bank_s *bank,
reg_param_t reg_params[4];
armv4_5_algorithm_t armv4_5_info;
int retval = ERROR_OK;
-
+
u32 str9x_flash_write_code[] = {
/* write: */
0xe3c14003, /* bic r4, r1, #3 */
@@ -419,14 +419,14 @@ static int str9x_write_block(struct flash_bank_s *bank,
/* exit: */
0xeafffffe, /* b exit */
};
-
+
/* flash write code */
if (target_alloc_working_area(target, 4 * 19, &str9x_info->write_algorithm) != ERROR_OK)
{
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
-
+
target_write_buffer(target, str9x_info->write_algorithm->address, 19 * 4, (u8*)str9x_flash_write_code);
/* memory buffer */
@@ -438,27 +438,27 @@ static int str9x_write_block(struct flash_bank_s *bank,
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (str9x_info->write_algorithm)
target_free_working_area(target, str9x_info->write_algorithm);
-
+
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_IN);
-
+
while (count > 0)
{
u32 thisrun_count = (count > (buffer_size / 2)) ? (buffer_size / 2) : count;
-
+
target_write_buffer(target, source->address, thisrun_count * 2, buffer);
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
@@ -469,26 +469,26 @@ static int str9x_write_block(struct flash_bank_s *bank,
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
if (buf_get_u32(reg_params[3].value, 0, 32) != 0x80)
{
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
-
+
buffer += thisrun_count * 2;
address += thisrun_count * 2;
count -= thisrun_count;
}
-
+
target_free_working_area(target, source);
target_free_working_area(target, str9x_info->write_algorithm);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
-
+
return retval;
}
@@ -505,7 +505,7 @@ static int str9x_write(struct flash_bank_s *bank,
u32 check_address = offset;
u32 bank_adr;
int i;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
@@ -517,12 +517,12 @@ static int str9x_write(struct flash_bank_s *bank,
LOG_WARNING("offset 0x%x breaks required 2-byte alignment", offset);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
-
+
for (i = 0; i < bank->num_sectors; i++)
{
u32 sec_start = bank->sectors[i].offset;
u32 sec_end = sec_start + bank->sectors[i].size;
-
+
/* check if destination falls within the current sector */
if ((check_address >= sec_start) && (check_address < sec_end))
{
@@ -533,12 +533,12 @@ static int str9x_write(struct flash_bank_s *bank,
check_address = sec_end;
}
}
-
+
if (check_address != offset + count)
return ERROR_FLASH_DST_OUT_OF_BANK;
-
+
/* multiple half words (2-byte) to be programmed? */
- if (words_remaining > 0)
+ if (words_remaining > 0)
{
/* try using a block write */
if ((retval = str9x_write_block(bank, buffer, offset, words_remaining)) != ERROR_OK)
@@ -546,7 +546,7 @@ static int str9x_write(struct flash_bank_s *bank,
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
/* if block write failed (no sufficient working area),
- * we use normal (slow) single dword accesses */
+ * we use normal (slow) single dword accesses */
LOG_WARNING("couldn't use block writes, falling back to single memory accesses");
}
else if (retval == ERROR_FLASH_OPERATION_FAILED)
@@ -566,17 +566,17 @@ static int str9x_write(struct flash_bank_s *bank,
while (words_remaining > 0)
{
bank_adr = address & ~0x03;
-
+
/* write data command */
target_write_u16(target, bank_adr, 0x40);
target_write_memory(target, address, 2, 1, buffer + bytes_written);
-
+
/* get status command */
target_write_u16(target, bank_adr, 0x70);
-
+
int timeout;
for (timeout=0; timeout<1000; timeout++)
- {
+ {
target_read_u8(target, bank_adr, &status);
if( status & 0x80 )
break;
@@ -587,11 +587,11 @@ static int str9x_write(struct flash_bank_s *bank,
LOG_ERROR("write timed out");
return ERROR_FAIL;
}
-
+
/* clear status reg and read array */
target_write_u16(target, bank_adr, 0x50);
target_write_u16(target, bank_adr, 0xFF);
-
+
if (status & 0x10)
return ERROR_FLASH_OPERATION_FAILED;
else if (status & 0x02)
@@ -601,31 +601,31 @@ static int str9x_write(struct flash_bank_s *bank,
words_remaining--;
address += 2;
}
-
+
if (bytes_remaining)
{
u8 last_halfword[2] = {0xff, 0xff};
int i = 0;
-
+
while(bytes_remaining > 0)
{
- last_halfword[i++] = *(buffer + bytes_written);
+ last_halfword[i++] = *(buffer + bytes_written);
bytes_remaining--;
bytes_written++;
}
-
+
bank_adr = address & ~0x03;
-
- /* write data comamnd */
+
+ /* write data command */
target_write_u16(target, bank_adr, 0x40);
target_write_memory(target, address, 2, 1, last_halfword);
-
+
/* query status command */
target_write_u16(target, bank_adr, 0x70);
-
+
int timeout;
for (timeout=0; timeout<1000; timeout++)
- {
+ {
target_read_u8(target, bank_adr, &status);
if( status & 0x80 )
break;
@@ -636,17 +636,17 @@ static int str9x_write(struct flash_bank_s *bank,
LOG_ERROR("write timed out");
return ERROR_FAIL;
}
-
+
/* clear status reg and read array */
target_write_u16(target, bank_adr, 0x50);
target_write_u16(target, bank_adr, 0xFF);
-
+
if (status & 0x10)
return ERROR_FLASH_OPERATION_FAILED;
else if (status & 0x02)
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
return ERROR_OK;
}
@@ -675,29 +675,29 @@ static int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx,
str9x_flash_bank_t *str9x_info;
flash_bank_t *bank;
target_t *target = NULL;
-
+
if (argc < 5)
{
return ERROR_COMMAND_SYNTAX_ERROR;
}
-
+
bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
if (!bank)
{
command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
-
+
str9x_info = bank->driver_priv;
-
+
target = bank->target;
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
/* config flash controller */
target_write_u32(target, FLASH_BBSR, strtoul(args[1], NULL, 0));
target_write_u32(target, FLASH_NBBSR, strtoul(args[2], NULL, 0));
@@ -706,7 +706,7 @@ static int str9x_handle_flash_config_command(struct command_context_s *cmd_ctx,
/* set bit 18 instruction TCM order as per flash programming manual */
arm966e_write_cp15(target, 62, 0x40000);
-
+
/* enable flash bank 1 */
target_write_u32(target, FLASH_CR, 0x18);
return ERROR_OK;
diff --git a/src/flash/str9xpec.c b/src/flash/str9xpec.c
index 5e9f43898..1ea81763b 100644
--- a/src/flash/str9xpec.c
+++ b/src/flash/str9xpec.c
@@ -113,12 +113,7 @@ int str9xpec_set_instr(jtag_tap_t *tap, u32 new_instr, tap_state_t end_state)
field.num_bits = tap->ir_length;
field.out_value = calloc(CEIL(field.num_bits, 8), 1);
buf_set_u32(field.out_value, 0, field.num_bits, new_instr);
-
field.in_value = NULL;
-
-
-
-
jtag_add_ir_scan(1, &field, end_state);
@@ -139,12 +134,8 @@ static u8 str9xpec_isc_status(jtag_tap_t *tap)
field.tap = tap;
field.num_bits = 8;
field.out_value = NULL;
-
field.in_value = &status;
-
-
-
-
+
jtag_add_dr_scan(1, &field, TAP_IDLE);
jtag_execute_queue();
@@ -231,12 +222,8 @@ static int str9xpec_read_config(struct flash_bank_s *bank)
field.tap = tap;
field.num_bits = 64;
field.out_value = NULL;
-
field.in_value = str9xpec_info->options;
-
-
-
-
+
jtag_add_dr_scan(1, &field, TAP_IDLE);
jtag_execute_queue();
@@ -383,12 +370,7 @@ static int str9xpec_blank_check(struct flash_bank_s *bank, int first, int last)
field.tap = tap;
field.num_bits = 64;
field.out_value = buffer;
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
jtag_add_sleep(40000);
@@ -397,12 +379,7 @@ static int str9xpec_blank_check(struct flash_bank_s *bank, int first, int last)
field.tap = tap;
field.num_bits = 64;
field.out_value = NULL;
-
field.in_value = buffer;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IRPAUSE);
jtag_execute_queue();
@@ -499,12 +476,7 @@ static int str9xpec_erase_area(struct flash_bank_s *bank, int first, int last)
field.tap = tap;
field.num_bits = 64;
field.out_value = buffer;
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
jtag_execute_queue();
@@ -565,12 +537,7 @@ static int str9xpec_lock_device(struct flash_bank_s *bank)
field.tap = tap;
field.num_bits = 8;
field.out_value = NULL;
-
field.in_value = &status;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_INVALID);
jtag_execute_queue();
@@ -651,12 +618,7 @@ static int str9xpec_set_address(struct flash_bank_s *bank, u8 sector)
field.tap = tap;
field.num_bits = 8;
field.out_value = §or;
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_INVALID);
@@ -740,12 +702,7 @@ static int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
field.tap = tap;
field.num_bits = 64;
field.out_value = (buffer + bytes_written);
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
@@ -758,12 +715,7 @@ static int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
field.tap = tap;
field.num_bits = 8;
field.out_value = NULL;
-
field.in_value = scanbuf;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_INVALID);
jtag_execute_queue();
@@ -800,12 +752,7 @@ static int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
field.tap = tap;
field.num_bits = 64;
field.out_value = last_dword;
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
@@ -818,12 +765,7 @@ static int str9xpec_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32
field.tap = tap;
field.num_bits = 8;
field.out_value = NULL;
-
field.in_value = scanbuf;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_INVALID);
jtag_execute_queue();
@@ -882,12 +824,7 @@ static int str9xpec_handle_part_id_command(struct command_context_s *cmd_ctx, ch
field.tap = tap;
field.num_bits = 32;
field.out_value = NULL;
-
field.in_value = buffer;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
jtag_execute_queue();
@@ -1007,12 +944,7 @@ static int str9xpec_write_options(struct flash_bank_s *bank)
field.tap = tap;
field.num_bits = 64;
field.out_value = str9xpec_info->options;
-
field.in_value = NULL;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_IDLE);
@@ -1025,12 +957,7 @@ static int str9xpec_write_options(struct flash_bank_s *bank)
field.tap = tap;
field.num_bits = 8;
field.out_value = NULL;
-
field.in_value = &status;
-
-
-
-
jtag_add_dr_scan(1, &field, TAP_INVALID);
jtag_execute_queue();
--
GitLab