From cb3f970b6c61d0643839f9261ddcce2b8664eac7 Mon Sep 17 00:00:00 2001
From: ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Thu, 15 Jan 2009 20:58:17 +0000
Subject: [PATCH] - add missing svn props from 1323 commit
git-svn-id: svn://svn.berlios.de/openocd/trunk@1324 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
src/target/board/imx31pdk.cfg | 202 +++++++++---------
testing/examples/ledtest-imx27ads/Makefile | 84 ++++----
testing/examples/ledtest-imx27ads/crt0.S | 94 ++++----
.../ledtest-imx27ads/gdbinit-imx27ads | 72 +++----
testing/examples/ledtest-imx27ads/ldscript | 36 ++--
testing/examples/ledtest-imx27ads/test.c | 120 +++++------
testing/examples/ledtest-imx31pdk/test.c | 2 +-
7 files changed, 305 insertions(+), 305 deletions(-)
diff --git a/src/target/board/imx31pdk.cfg b/src/target/board/imx31pdk.cfg
index c6c423ce7..67233567f 100644
--- a/src/target/board/imx31pdk.cfg
+++ b/src/target/board/imx31pdk.cfg
@@ -1,101 +1,101 @@
-# The IMX31PDK eval board has a single IMX31 chip
-source [find target/imx31.cfg]
-$_TARGETNAME configure -event gdb-attach { reset init }
-$_TARGETNAME configure -event reset-init { imx31pdk_init }
-
-proc imx31pdk_init { } {
- # This setup puts RAM at 0x80000000
-
- # reset the board correctly
- reset run
- reset halt
-
- # ========================================
- # Init CCM
- # ========================================
- mww 0x53FC0000 0x040
- mww 0x53F80000 0x074B0B7D
-
- sleep 100
-
- # ========================================
- # 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
- # ========================================
- mww 0x53F80004 0xFF871D50
- mww 0x53F80010 0x00271C1B
-
- # ========================================
- # Configure CPLD on CS5
- # ========================================
- mww 0xb8002050 0x0000DCF6
- mww 0xb8002054 0x444A4541
- mww 0xb8002058 0x44443302
-
- # ========================================
- # SDCLK
- # ========================================
- mww 0x43FAC26C 0
-
- # ========================================
- # CAS
- # ========================================
- mww 0x43FAC270 0
-
- # ========================================
- # RAS
- # ========================================
- mww 0x43FAC274 0
-
- # ========================================
- # CS2 (CSD0)
- # ========================================
- mww 0x43FAC27C 0x1000
-
- # ========================================
- # DQM3
- # ========================================
- mww 0x43FAC284 0
-
- # ========================================
- # DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
- # ========================================
- mww 0x43FAC288 0
- mww 0x43FAC28C 0
- mww 0x43FAC290 0
- mww 0x43FAC294 0
- mww 0x43FAC298 0
- mww 0x43FAC29C 0
- mww 0x43FAC2A0 0
- mww 0x43FAC2A4 0
- mww 0x43FAC2A8 0
- mww 0x43FAC2AC 0
- mww 0x43FAC2B0 0
- mww 0x43FAC2B4 0
- mww 0x43FAC2B8 0
- mww 0x43FAC2BC 0
- mww 0x43FAC2C0 0
- mww 0x43FAC2C4 0
- mww 0x43FAC2C8 0
- mww 0x43FAC2CC 0
- mww 0x43FAC2D0 0
- mww 0x43FAC2D4 0
- mww 0x43FAC2D8 0
- mww 0x43FAC2DC 0
-
- # ========================================
- # Initialization script for 32 bit DDR on MX31 PDK
- # ========================================
- mww 0xB8001010 0x00000004
- mww 0xB8001004 0x006ac73a
- mww 0xB8001000 0x92100000
- mww 0x80000f00 0x12344321
- mww 0xB8001000 0xa2100000
- mww 0x80000000 0x12344321
- mww 0x80000000 0x12344321
- mww 0xB8001000 0xb2100000
- mwb 0x80000033 0xda
- mwb 0x81000000 0xff
- mww 0xB8001000 0x82226080
- mww 0x80000000 0xDEADBEEF
- mww 0xB8001010 0x0000000c
-}
+# The IMX31PDK eval board has a single IMX31 chip
+source [find target/imx31.cfg]
+$_TARGETNAME configure -event gdb-attach { reset init }
+$_TARGETNAME configure -event reset-init { imx31pdk_init }
+
+proc imx31pdk_init { } {
+ # This setup puts RAM at 0x80000000
+
+ # reset the board correctly
+ reset run
+ reset halt
+
+ # ========================================
+ # Init CCM
+ # ========================================
+ mww 0x53FC0000 0x040
+ mww 0x53F80000 0x074B0B7D
+
+ sleep 100
+
+ # ========================================
+ # 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
+ # ========================================
+ mww 0x53F80004 0xFF871D50
+ mww 0x53F80010 0x00271C1B
+
+ # ========================================
+ # Configure CPLD on CS5
+ # ========================================
+ mww 0xb8002050 0x0000DCF6
+ mww 0xb8002054 0x444A4541
+ mww 0xb8002058 0x44443302
+
+ # ========================================
+ # SDCLK
+ # ========================================
+ mww 0x43FAC26C 0
+
+ # ========================================
+ # CAS
+ # ========================================
+ mww 0x43FAC270 0
+
+ # ========================================
+ # RAS
+ # ========================================
+ mww 0x43FAC274 0
+
+ # ========================================
+ # CS2 (CSD0)
+ # ========================================
+ mww 0x43FAC27C 0x1000
+
+ # ========================================
+ # DQM3
+ # ========================================
+ mww 0x43FAC284 0
+
+ # ========================================
+ # DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
+ # ========================================
+ mww 0x43FAC288 0
+ mww 0x43FAC28C 0
+ mww 0x43FAC290 0
+ mww 0x43FAC294 0
+ mww 0x43FAC298 0
+ mww 0x43FAC29C 0
+ mww 0x43FAC2A0 0
+ mww 0x43FAC2A4 0
+ mww 0x43FAC2A8 0
+ mww 0x43FAC2AC 0
+ mww 0x43FAC2B0 0
+ mww 0x43FAC2B4 0
+ mww 0x43FAC2B8 0
+ mww 0x43FAC2BC 0
+ mww 0x43FAC2C0 0
+ mww 0x43FAC2C4 0
+ mww 0x43FAC2C8 0
+ mww 0x43FAC2CC 0
+ mww 0x43FAC2D0 0
+ mww 0x43FAC2D4 0
+ mww 0x43FAC2D8 0
+ mww 0x43FAC2DC 0
+
+ # ========================================
+ # Initialization script for 32 bit DDR on MX31 PDK
+ # ========================================
+ mww 0xB8001010 0x00000004
+ mww 0xB8001004 0x006ac73a
+ mww 0xB8001000 0x92100000
+ mww 0x80000f00 0x12344321
+ mww 0xB8001000 0xa2100000
+ mww 0x80000000 0x12344321
+ mww 0x80000000 0x12344321
+ mww 0xB8001000 0xb2100000
+ mwb 0x80000033 0xda
+ mwb 0x81000000 0xff
+ mww 0xB8001000 0x82226080
+ mww 0x80000000 0xDEADBEEF
+ mww 0xB8001010 0x0000000c
+}
diff --git a/testing/examples/ledtest-imx27ads/Makefile b/testing/examples/ledtest-imx27ads/Makefile
index 425164923..4009c41b2 100644
--- a/testing/examples/ledtest-imx27ads/Makefile
+++ b/testing/examples/ledtest-imx27ads/Makefile
@@ -1,42 +1,42 @@
-# This will make the test program for a Freescale iMX27 ADS Board with a
-# FreeScale iMX27 CPU
-
-PROC=arm
-TYPE=926ejs-linux
-LDSCRIPT=ldscript
-
-PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)
-CC=$(PROC)-$(TYPE)-gcc
-AS=$(PROC)-$(TYPE)-as
-AR=$(PROC)-$(TYPE)-ar
-LD=$(PROC)-$(TYPE)-ld
-NM=$(PROC)-$(TYPE)-nm
-OBJDUMP=$(PROC)-$(TYPE)-objdump
-CFLAGS= -g -c -mcpu=arm920t
-
-all: test.elf
-
-# Make a little endian image:
-# In Eclipse, add the line :
-# source gdbinit
-# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
-# To start gdb from a window use : arm-elf-gdb --command=gdbinit
-test.elf: test.c Makefile ldscript crt0.S
- $(CC) $(CFLAGS) -o crt0.o crt0.S
- $(CC) $(CFLAGS) -o test.o test.c
- $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o
- $(NM) test.elf
-
-
-dump:
- $(OBJDUMP) --all-headers test.elf
-
-dump_test:
- $(OBJDUMP) --disassemble test.elf
-
-dump_full:
- $(OBJDUMP) --full-contents test.elf
-
-clean:
- -/bin/rm -f *.o *~ test.elf
-
+# This will make the test program for a Freescale iMX27 ADS Board with a
+# FreeScale iMX27 CPU
+
+PROC=arm
+TYPE=926ejs-linux
+LDSCRIPT=ldscript
+
+PATH:=/opt/freescale/usr/local/gcc-4.1.1-glibc-2.4-nptl-sf-1/arm-926ejs-linux/bin/:$(PATH)
+CC=$(PROC)-$(TYPE)-gcc
+AS=$(PROC)-$(TYPE)-as
+AR=$(PROC)-$(TYPE)-ar
+LD=$(PROC)-$(TYPE)-ld
+NM=$(PROC)-$(TYPE)-nm
+OBJDUMP=$(PROC)-$(TYPE)-objdump
+CFLAGS= -g -c -mcpu=arm920t
+
+all: test.elf
+
+# Make a little endian image:
+# In Eclipse, add the line :
+# source gdbinit
+# to : Run -> Debug... (menu) -> Commands (tab): Commands (listbox)
+# To start gdb from a window use : arm-elf-gdb --command=gdbinit
+test.elf: test.c Makefile ldscript crt0.S
+ $(CC) $(CFLAGS) -o crt0.o crt0.S
+ $(CC) $(CFLAGS) -o test.o test.c
+ $(LD) -g -v -T$(LDSCRIPT) -o test.elf crt0.o test.o
+ $(NM) test.elf
+
+
+dump:
+ $(OBJDUMP) --all-headers test.elf
+
+dump_test:
+ $(OBJDUMP) --disassemble test.elf
+
+dump_full:
+ $(OBJDUMP) --full-contents test.elf
+
+clean:
+ -/bin/rm -f *.o *~ test.elf
+
diff --git a/testing/examples/ledtest-imx27ads/crt0.S b/testing/examples/ledtest-imx27ads/crt0.S
index 6c15be213..d7498814c 100644
--- a/testing/examples/ledtest-imx27ads/crt0.S
+++ b/testing/examples/ledtest-imx27ads/crt0.S
@@ -1,47 +1,47 @@
-/* Sample initialization file */
-
- .extern main
- .extern exit
-
-/* .text is used instead of .section .text so it works with arm-aout too. */
- .text
- .code 32
- .align 0
-
- .global _mainCRTStartup
- .global _start
- .global start
-start:
-_start:
-_mainCRTStartup:
-
-/* Start by setting up a stack */
- /* Set up the stack pointer to end of bss */
- ldr r3, .LC2
- mov sp, r3
-
- sub sl, sp, #512 /* Still assumes 512 bytes below sl */
-
- mov a2, #0 /* Second arg: fill value */
- mov fp, a2 /* Null frame pointer */
- mov r7, a2 /* Null frame pointer for Thumb */
-
- ldr a1, .LC1 /* First arg: start of memory block */
- ldr a3, .LC2 /* Second arg: end of memory block */
- sub a3, a3, a1 /* Third arg: length of block */
-
- mov r0, #0 /* no arguments */
- mov r1, #0 /* no argv either */
-
- bl main
- bl exit /* Should not return */
-
- /* For Thumb, constants must be after the code since only
- positive offsets are supported for PC relative addresses. */
-
- .align 0
-.LC1:
- .word __bss_start__
-.LC2:
- .word __bss_end__
-
+/* Sample initialization file */
+
+ .extern main
+ .extern exit
+
+/* .text is used instead of .section .text so it works with arm-aout too. */
+ .text
+ .code 32
+ .align 0
+
+ .global _mainCRTStartup
+ .global _start
+ .global start
+start:
+_start:
+_mainCRTStartup:
+
+/* Start by setting up a stack */
+ /* Set up the stack pointer to end of bss */
+ ldr r3, .LC2
+ mov sp, r3
+
+ sub sl, sp, #512 /* Still assumes 512 bytes below sl */
+
+ mov a2, #0 /* Second arg: fill value */
+ mov fp, a2 /* Null frame pointer */
+ mov r7, a2 /* Null frame pointer for Thumb */
+
+ ldr a1, .LC1 /* First arg: start of memory block */
+ ldr a3, .LC2 /* Second arg: end of memory block */
+ sub a3, a3, a1 /* Third arg: length of block */
+
+ mov r0, #0 /* no arguments */
+ mov r1, #0 /* no argv either */
+
+ bl main
+ bl exit /* Should not return */
+
+ /* For Thumb, constants must be after the code since only
+ positive offsets are supported for PC relative addresses. */
+
+ .align 0
+.LC1:
+ .word __bss_start__
+.LC2:
+ .word __bss_end__
+
diff --git a/testing/examples/ledtest-imx27ads/gdbinit-imx27ads b/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
index 44758cf15..4764bc738 100644
--- a/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
+++ b/testing/examples/ledtest-imx27ads/gdbinit-imx27ads
@@ -1,36 +1,36 @@
-echo Script to load ledtest on iMX27ADS.\n
-
-# Note: you need to startup openocd with "-f board/imx27ads.cfg"
-# in order to it initialize RAM memory.
-
-# SETUP GDB :
-#
-# Common gdb setup for ARM CPUs
-set complaints 1
-set output-radix 10
-set input-radix 10
-set prompt (arm-gdb)
-set endian little
-dir .
-
-# CONNECT TO TARGET :
-target remote 127.0.0.1:3333
-
-# LOAD IMAGE :
-#
-
-# Load the program executable called "u-boot"
-load test.elf
-
-# Load the symbols for the program.
-symbol-file test.elf
-
-# RUN TO MAIN :
-#
-# Set a breakpoint at main().
-#b reset
-b main
-
-# Run to the breakpoint.
-c
-
+echo Script to load ledtest on iMX27ADS.\n
+
+# Note: you need to startup openocd with "-f board/imx27ads.cfg"
+# in order to it initialize RAM memory.
+
+# SETUP GDB :
+#
+# Common gdb setup for ARM CPUs
+set complaints 1
+set output-radix 10
+set input-radix 10
+set prompt (arm-gdb)
+set endian little
+dir .
+
+# CONNECT TO TARGET :
+target remote 127.0.0.1:3333
+
+# LOAD IMAGE :
+#
+
+# Load the program executable called "u-boot"
+load test.elf
+
+# Load the symbols for the program.
+symbol-file test.elf
+
+# RUN TO MAIN :
+#
+# Set a breakpoint at main().
+#b reset
+b main
+
+# Run to the breakpoint.
+c
+
diff --git a/testing/examples/ledtest-imx27ads/ldscript b/testing/examples/ledtest-imx27ads/ldscript
index 39cf76845..a8f0a0885 100644
--- a/testing/examples/ledtest-imx27ads/ldscript
+++ b/testing/examples/ledtest-imx27ads/ldscript
@@ -1,18 +1,18 @@
-SECTIONS
-{
- . = 0xA0000000;
- .text : { *(.text) }
- .data ALIGN(0x10): { *(.data) }
- .bss ALIGN(0x10): {
- __bss_start__ = ABSOLUTE(.);
- *(.bss)
- . += 0x100;
- }
- __bss_end__ = .;
-PROVIDE (__stack = .);
- _end = .;
- .debug_info 0 : { *(.debug_info) }
- .debug_abbrev 0 : { *(.debug_abbrev) }
- .debug_line 0 : { *(.debug_line) }
- .debug_frame 0 : { *(.debug_frame) }
-}
+SECTIONS
+{
+ . = 0xA0000000;
+ .text : { *(.text) }
+ .data ALIGN(0x10): { *(.data) }
+ .bss ALIGN(0x10): {
+ __bss_start__ = ABSOLUTE(.);
+ *(.bss)
+ . += 0x100;
+ }
+ __bss_end__ = .;
+PROVIDE (__stack = .);
+ _end = .;
+ .debug_info 0 : { *(.debug_info) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+}
diff --git a/testing/examples/ledtest-imx27ads/test.c b/testing/examples/ledtest-imx27ads/test.c
index 945778df8..abb3bd15a 100644
--- a/testing/examples/ledtest-imx27ads/test.c
+++ b/testing/examples/ledtest-imx27ads/test.c
@@ -1,60 +1,60 @@
-/***************************************************************************
- * Copyright (C) 2009 by Alan Carvalho de Assis *
- * acassis@gmail.com *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-
-void delay()
-{
- int i;
- for (i = 0; i < 500000; i++);
-}
-
-/* MAIN ARM FUNTION */
-int main (void)
-{
- int i;
- volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);
- volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);
-
- for (i = 0; i < 10000; i++)
- {
- *ledon = 0x30;
- delay();
- *ledoff = 0x30;
- delay();
- } /* FOR */
-
-} /* MAIN */
-
-__gccmain()
-{
-} /* GCCMAIN */
-
-
-void exit(int exit_code)
-{
- while(1);
-} /* EXIT */
-
-
-atexit()
-{
- while(1);
-} /* ATEXIT */
-
-
+/***************************************************************************
+ * Copyright (C) 2009 by Alan Carvalho de Assis *
+ * acassis@gmail.com *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+void delay()
+{
+ int i;
+ for (i = 0; i < 500000; i++);
+}
+
+/* MAIN ARM FUNTION */
+int main (void)
+{
+ int i;
+ volatile unsigned char *ledoff = ((volatile unsigned char *)0xD4000008);
+ volatile unsigned char *ledon = ((volatile unsigned char *)0xD400000C);
+
+ for (i = 0; i < 10000; i++)
+ {
+ *ledon = 0x30;
+ delay();
+ *ledoff = 0x30;
+ delay();
+ } /* FOR */
+
+} /* MAIN */
+
+__gccmain()
+{
+} /* GCCMAIN */
+
+
+void exit(int exit_code)
+{
+ while(1);
+} /* EXIT */
+
+
+atexit()
+{
+ while(1);
+} /* ATEXIT */
+
+
diff --git a/testing/examples/ledtest-imx31pdk/test.c b/testing/examples/ledtest-imx31pdk/test.c
index 992447b86..446bc909d 100644
--- a/testing/examples/ledtest-imx31pdk/test.c
+++ b/testing/examples/ledtest-imx31pdk/test.c
@@ -1,5 +1,5 @@
/***************************************************************************
- * Copyright (C) 2009 by Alan Carvalho de Assis *
+ * Copyright (C) 2009 by Alan Carvalho de Assis *
* acassis@gmail.com *
* *
* This program is free software; you can redistribute it and/or modify *
--
GitLab