diff --git a/NEWS b/NEWS
index 0b9a6a4a4ed2c1c641a1d6bfa2fe022748b9b0f4..a744da372b931149bb6bba0b1aeb3b5eb8524bfc 100644
--- a/NEWS
+++ b/NEWS
@@ -6,9 +6,10 @@ and other issues not mentioned here.
 JTAG Layer:
 	New driver for "Bus Pirate"
 	Rename various commands so they're not JTAG-specific
-	   There are migration procedures for these, but you should
+	   There are migration procedures for most of these, but you should
 	   convert your scripts to the new names, since those procedures
 	   will not be around forever.
+		jtag jinterface ... is now adapter_name
 	   	jtag_khz	... is now adapter_khz
 		jtag_nsrst_delay ... is now adapter_nsrst_delay
 		jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
diff --git a/doc/openocd.texi b/doc/openocd.texi
index 83a6369cf8f30e4d892d0d7b4933f0f8ecd7cc66..bb8f3abbc814ba42bedaa0d04ebc4d4b472dd26f 100644
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -2093,12 +2093,12 @@ target.
 @end deffn
 
 @deffn Command {interface_list}
-List the interface drivers that have been built into
+List the debug adapter drivers that have been built into
 the running copy of OpenOCD.
 @end deffn
 
-@deffn Command {jtag interface}
-Returns the name of the interface driver being used.
+@deffn Command {adapter_name}
+Returns the name of the debug adapter driver being used.
 @end deffn
 
 @section Interface Drivers
diff --git a/src/jtag/Makefile.am b/src/jtag/Makefile.am
index 3f132d4778b8111ab73c2960bd48a764cad68836..875fbcb67d2303712e037bf55852925e6fc61898 100644
--- a/src/jtag/Makefile.am
+++ b/src/jtag/Makefile.am
@@ -53,6 +53,7 @@ minidriver_imp.h: $(MINIDRIVER_IMP_DIR)/minidriver_imp.h
 
 
 libjtag_la_SOURCES = \
+	adapter.c \
 	core.c \
 	interface.c \
 	interfaces.c \
diff --git a/src/jtag/adapter.c b/src/jtag/adapter.c
new file mode 100644
index 0000000000000000000000000000000000000000..b262a9a769d7918eaac0c04cd021f528dd302fea
--- /dev/null
+++ b/src/jtag/adapter.c
@@ -0,0 +1,459 @@
+/***************************************************************************
+ *   Copyright (C) 2005 by Dominic Rath                                    *
+ *   Dominic.Rath@gmx.de                                                   *
+ *                                                                         *
+ *   Copyright (C) 2007-2010 Øyvind Harboe                                 *
+ *   oyvind.harboe@zylin.com                                               *
+ *                                                                         *
+ *   Copyright (C) 2009 SoftPLC Corporation                                *
+ *       http://softplc.com                                                *
+ *   dick@softplc.com                                                      *
+ *                                                                         *
+ *   Copyright (C) 2009 Zachary T Welch                                    *
+ *   zw@superlucidity.net                                                  *
+ *                                                                         *
+ *   This program is free software; you can redistribute it and/or modify  *
+ *   it under the terms of the GNU General Public License as published by  *
+ *   the Free Software Foundation; either version 2 of the License, or     *
+ *   (at your option) any later version.                                   *
+ *                                                                         *
+ *   This program is distributed in the hope that it will be useful,       *
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
+ *   GNU General Public License for more details.                          *
+ *                                                                         *
+ *   You should have received a copy of the GNU General Public License     *
+ *   along with this program; if not, write to the                         *
+ *   Free Software Foundation, Inc.,                                       *
+ *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
+ ***************************************************************************/
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "jtag.h"
+#include "minidriver.h"
+#include "interface.h"
+#include "interfaces.h"
+
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+
+/**
+ * @file
+ * Holds support for configuring debug adapters from TCl scripts.
+ */
+
+extern struct jtag_interface *jtag_interface;
+
+
+
+static int
+jim_adapter_name(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
+{
+	Jim_GetOptInfo goi;
+	Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
+
+	/* return the name of the interface */
+	/* TCL code might need to know the exact type... */
+	/* FUTURE: we allow this as a means to "set" the interface. */
+	if (goi.argc != 0) {
+		Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
+		return JIM_ERR;
+	}
+	const char *name = jtag_interface ? jtag_interface->name : NULL;
+	Jim_SetResultString(goi.interp, name ? : "undefined", -1);
+	return JIM_OK;
+}
+
+
+static int default_khz(int khz, int *jtag_speed)
+{
+	LOG_ERROR("Translation from khz to jtag_speed not implemented");
+	return ERROR_FAIL;
+}
+
+static int default_speed_div(int speed, int *khz)
+{
+	LOG_ERROR("Translation from jtag_speed to khz not implemented");
+	return ERROR_FAIL;
+}
+
+static int default_power_dropout(int *dropout)
+{
+	*dropout = 0; /* by default we can't detect power dropout */
+	return ERROR_OK;
+}
+
+static int default_srst_asserted(int *srst_asserted)
+{
+	*srst_asserted = 0; /* by default we can't detect srst asserted */
+	return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_interface_list_command)
+{
+	if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
+		return ERROR_COMMAND_SYNTAX_ERROR;
+
+	command_print(CMD_CTX, "The following debug interfaces are available:");
+	for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
+	{
+		const char *name = jtag_interfaces[i]->name;
+		command_print(CMD_CTX, "%u: %s", i + 1, name);
+	}
+
+	return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_interface_command)
+{
+	/* check whether the interface is already configured */
+	if (jtag_interface)
+	{
+		LOG_WARNING("Interface already configured, ignoring");
+		return ERROR_OK;
+	}
+
+	/* interface name is a mandatory argument */
+	if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
+		return ERROR_COMMAND_SYNTAX_ERROR;
+
+	for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
+	{
+		if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
+			continue;
+
+		if (NULL != jtag_interfaces[i]->commands)
+		{
+			int retval = register_commands(CMD_CTX, NULL,
+					jtag_interfaces[i]->commands);
+			if (ERROR_OK != retval)
+				return retval;
+		}
+
+		jtag_interface = jtag_interfaces[i];
+
+		if (jtag_interface->khz == NULL)
+			jtag_interface->khz = default_khz;
+		if (jtag_interface->speed_div == NULL)
+			jtag_interface->speed_div = default_speed_div;
+		if (jtag_interface->power_dropout == NULL)
+			jtag_interface->power_dropout = default_power_dropout;
+		if (jtag_interface->srst_asserted == NULL)
+			jtag_interface->srst_asserted = default_srst_asserted;
+
+		return ERROR_OK;
+	}
+
+	/* no valid interface was found (i.e. the configuration option,
+	 * didn't match one of the compiled-in interfaces
+	 */
+	LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
+	CALL_COMMAND_HANDLER(handle_interface_list_command);
+	return ERROR_JTAG_INVALID_INTERFACE;
+}
+
+COMMAND_HANDLER(handle_reset_config_command)
+{
+	int new_cfg = 0;
+	int mask = 0;
+
+	/* Original versions cared about the order of these tokens:
+	 *   reset_config signals [combination [trst_type [srst_type]]]
+	 * They also clobbered the previous configuration even on error.
+	 *
+	 * Here we don't care about the order, and only change values
+	 * which have been explicitly specified.
+	 */
+	for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
+		int tmp = 0;
+		int m;
+
+		/* gating */
+		m = RESET_SRST_NO_GATING;
+		if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
+			/* default: don't use JTAG while SRST asserted */;
+		else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
+			tmp = RESET_SRST_NO_GATING;
+		else
+			m = 0;
+		if (mask & m) {
+			LOG_ERROR("extra reset_config %s spec (%s)",
+					"gating", *CMD_ARGV);
+			return ERROR_INVALID_ARGUMENTS;
+		}
+		if (m)
+			goto next;
+
+		/* signals */
+		m = RESET_HAS_TRST | RESET_HAS_SRST;
+		if (strcmp(*CMD_ARGV, "none") == 0)
+			tmp = RESET_NONE;
+		else if (strcmp(*CMD_ARGV, "trst_only") == 0)
+			tmp = RESET_HAS_TRST;
+		else if (strcmp(*CMD_ARGV, "srst_only") == 0)
+			tmp = RESET_HAS_SRST;
+		else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
+			tmp = RESET_HAS_TRST | RESET_HAS_SRST;
+		else
+			m = 0;
+		if (mask & m) {
+			LOG_ERROR("extra reset_config %s spec (%s)",
+					"signal", *CMD_ARGV);
+			return ERROR_INVALID_ARGUMENTS;
+		}
+		if (m)
+			goto next;
+
+		/* combination (options for broken wiring) */
+		m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+		if (strcmp(*CMD_ARGV, "separate") == 0)
+			/* separate reset lines - default */;
+		else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
+			tmp |= RESET_SRST_PULLS_TRST;
+		else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
+			tmp |= RESET_TRST_PULLS_SRST;
+		else if (strcmp(*CMD_ARGV, "combined") == 0)
+			tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
+		else
+			m = 0;
+		if (mask & m) {
+			LOG_ERROR("extra reset_config %s spec (%s)",
+					"combination", *CMD_ARGV);
+			return ERROR_INVALID_ARGUMENTS;
+		}
+		if (m)
+			goto next;
+
+		/* trst_type (NOP without HAS_TRST) */
+		m = RESET_TRST_OPEN_DRAIN;
+		if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
+			tmp |= RESET_TRST_OPEN_DRAIN;
+		else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
+			/* push/pull from adapter - default */;
+		else
+			m = 0;
+		if (mask & m) {
+			LOG_ERROR("extra reset_config %s spec (%s)",
+					"trst_type", *CMD_ARGV);
+			return ERROR_INVALID_ARGUMENTS;
+		}
+		if (m)
+			goto next;
+
+		/* srst_type (NOP without HAS_SRST) */
+		m |= RESET_SRST_PUSH_PULL;
+		if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
+			tmp |= RESET_SRST_PUSH_PULL;
+		else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
+			/* open drain from adapter - default */;
+		else
+			m = 0;
+		if (mask & m) {
+			LOG_ERROR("extra reset_config %s spec (%s)",
+					"srst_type", *CMD_ARGV);
+			return ERROR_INVALID_ARGUMENTS;
+		}
+		if (m)
+			goto next;
+
+		/* caller provided nonsense; fail */
+		LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
+		return ERROR_INVALID_ARGUMENTS;
+
+next:
+		/* Remember the bits which were specified (mask)
+		 * and their new values (new_cfg).
+		 */
+		mask |= m;
+		new_cfg |= tmp;
+	}
+
+	/* clear previous values of those bits, save new values */
+	if (mask) {
+		int old_cfg = jtag_get_reset_config();
+
+		old_cfg &= ~mask;
+		new_cfg |= old_cfg;
+		jtag_set_reset_config(new_cfg);
+	} else
+		new_cfg = jtag_get_reset_config();
+
+
+	/*
+	 * Display the (now-)current reset mode
+	 */
+	char *modes[5];
+
+	/* minimal JTAG has neither SRST nor TRST (so that's the default) */
+	switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
+	case RESET_HAS_SRST:
+		modes[0] = "srst_only";
+		break;
+	case RESET_HAS_TRST:
+		modes[0] = "trst_only";
+		break;
+	case RESET_TRST_AND_SRST:
+		modes[0] = "trst_and_srst";
+		break;
+	default:
+		modes[0] = "none";
+		break;
+	}
+
+	/* normally SRST and TRST are decoupled; but bugs happen ... */
+	switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
+	case RESET_SRST_PULLS_TRST:
+		modes[1] = "srst_pulls_trst";
+		break;
+	case RESET_TRST_PULLS_SRST:
+		modes[1] = "trst_pulls_srst";
+		break;
+	case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
+		modes[1] = "combined";
+		break;
+	default:
+		modes[1] = "separate";
+		break;
+	}
+
+	/* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
+	if (new_cfg & RESET_HAS_TRST) {
+		if (new_cfg & RESET_TRST_OPEN_DRAIN)
+			modes[3] = " trst_open_drain";
+		else
+			modes[3] = " trst_push_pull";
+	} else
+		modes[3] = "";
+
+	/* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
+	if (new_cfg & RESET_HAS_SRST) {
+		if (new_cfg & RESET_SRST_NO_GATING)
+			modes[2] = " srst_nogate";
+		else
+			modes[2] = " srst_gates_jtag";
+
+		if (new_cfg & RESET_SRST_PUSH_PULL)
+			modes[4] = " srst_push_pull";
+		else
+			modes[4] = " srst_open_drain";
+	} else {
+		modes[2] = "";
+		modes[4] = "";
+	}
+
+	command_print(CMD_CTX, "%s %s%s%s%s",
+			modes[0], modes[1],
+			modes[2], modes[3], modes[4]);
+
+	return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
+{
+	if (CMD_ARGC > 1)
+		return ERROR_COMMAND_SYNTAX_ERROR;
+	if (CMD_ARGC == 1)
+	{
+		unsigned delay;
+		COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
+
+		jtag_set_nsrst_delay(delay);
+	}
+	command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
+	return ERROR_OK;
+}
+
+COMMAND_HANDLER(handle_adapter_khz_command)
+{
+	if (CMD_ARGC > 1)
+		return ERROR_COMMAND_SYNTAX_ERROR;
+
+	int retval = ERROR_OK;
+	if (CMD_ARGC == 1)
+	{
+		unsigned khz = 0;
+		COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
+
+		retval = jtag_config_khz(khz);
+		if (ERROR_OK != retval)
+			return retval;
+	}
+
+	int cur_speed = jtag_get_speed_khz();
+	retval = jtag_get_speed_readable(&cur_speed);
+	if (ERROR_OK != retval)
+		return retval;
+
+	if (cur_speed)
+		command_print(CMD_CTX, "%d kHz", cur_speed);
+	else
+		command_print(CMD_CTX, "RCLK - adaptive");
+
+	return retval;
+}
+
+static const struct command_registration interface_command_handlers[] = {
+	{
+		.name = "adapter_khz",
+		.handler = handle_adapter_khz_command,
+		.mode = COMMAND_ANY,
+		.help = "With an argument, change to the specified maximum "
+			"jtag speed.  For JTAG, 0 KHz signifies adaptive "
+			" clocking. "
+			"With or without argument, display current setting.",
+		.usage = "[khz]",
+	},
+	{
+		.name = "adapter_name",
+		.mode = COMMAND_ANY,
+		.jim_handler = jim_adapter_name,
+		.help = "Returns the name of the currently "
+			"selected adapter (driver)",
+	},
+	{
+		.name = "adapter_nsrst_delay",
+		.handler = handle_adapter_nsrst_delay_command,
+		.mode = COMMAND_ANY,
+		.help = "delay after deasserting SRST in ms",
+		.usage = "[milliseconds]",
+	},
+	{
+		.name = "interface",
+		.handler = handle_interface_command,
+		.mode = COMMAND_CONFIG,
+		.help = "Select a debug adapter interface (driver)",
+		.usage = "driver_name",
+	},
+	{
+		.name = "interface_list",
+		.handler = handle_interface_list_command,
+		.mode = COMMAND_ANY,
+		.help = "List all built-in debug adapter interfaces (drivers)",
+	},
+	{
+		.name = "reset_config",
+		.handler = handle_reset_config_command,
+		.mode = COMMAND_ANY,
+		.help = "configure adapter reset behavior",
+		.usage = "[none|trst_only|srst_only|trst_and_srst] "
+			"[srst_pulls_trst|trst_pulls_srst|combined|separate] "
+			"[srst_gates_jtag|srst_nogate] "
+			"[trst_push_pull|trst_open_drain] "
+			"[srst_push_pull|srst_open_drain]",
+	},
+	COMMAND_REGISTRATION_DONE
+};
+
+/**
+ * Register the commands which deal with arbitrary debug adapter drivers.
+ *
+ * @todo Remove internal assumptions that all debug adapters use JTAG for
+ * transport.  Various types and data structures are not named generically.
+ */
+int interface_register_commands(struct command_context *ctx)
+{
+	return register_commands(ctx, NULL, interface_command_handlers);
+}
diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
index 3a36886dd88ce1345c22d2f55f89495c5b2e877b..496fdc82e7707d035d2244ace05d7a712bfa69cb 100644
--- a/src/jtag/startup.tcl
+++ b/src/jtag/startup.tcl
@@ -78,7 +78,7 @@ proc srst_asserted {} {
 
 # BEGIN MIGRATION AIDS ...  these adapter operations originally had
 # JTAG-specific names despite the fact that the operations were not
-# specific to JTAG.
+# specific to JTAG, or otherewise had troublesome/misleading names.
 #
 # FIXME phase these aids out after about April 2011
 #
diff --git a/src/jtag/tcl.c b/src/jtag/tcl.c
index 25516cf98bd3b8b2233983fa699db0125323f5bc..7dc7fb7c043e1bec865dbb4c1420c2874be05199 100644
--- a/src/jtag/tcl.c
+++ b/src/jtag/tcl.c
@@ -40,6 +40,11 @@
 #include <strings.h>
 #endif
 
+/**
+ * @file
+ * Holds support for accessing JTAG-specific mechanisms from TCl scripts.
+ */
+
 static const Jim_Nvp nvp_jtag_tap_event[] = {
 	{ .value = JTAG_TRST_ASSERTED,		.name = "post-reset" },
 	{ .value = JTAG_TAP_EVENT_SETUP,	.name = "setup" },
@@ -671,24 +676,6 @@ static void jtag_tap_handle_event(struct jtag_tap *tap, enum jtag_event e)
 	}
 }
 
-static int
-jim_jtag_interface(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
-{
-	Jim_GetOptInfo goi;
-	Jim_GetOpt_Setup(&goi, interp, argc-1, argv + 1);
-
-	/* return the name of the interface */
-	/* TCL code might need to know the exact type... */
-	/* FUTURE: we allow this as a means to "set" the interface. */
-	if (goi.argc != 0) {
-		Jim_WrongNumArgs(goi.interp, 1, goi.argv-1, "(no params)");
-		return JIM_ERR;
-	}
-	const char *name = jtag_interface ? jtag_interface->name : NULL;
-	Jim_SetResultString(goi.interp, name ? : "undefined", -1);
-	return JIM_OK;
-}
-
 static int jim_jtag_arp_init(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
 {
 	Jim_GetOptInfo goi;
@@ -862,12 +849,6 @@ static const struct command_registration jtag_subcommand_handlers[] = {
 		.handler = handle_jtag_init_command,
 		.help = "initialize jtag scan chain",
 	},
-	{
-		.name = "interface",
-		.mode = COMMAND_ANY,
-		.jim_handler = jim_jtag_interface,
-		.help = "Returns the name of the currently selected interface.",
-	},
 	{
 		.name = "arp_init",
 		.mode = COMMAND_ANY,
@@ -957,93 +938,6 @@ void jtag_notify_event(enum jtag_event event)
 }
 
 
-static int default_khz(int khz, int *jtag_speed)
-{
-	LOG_ERROR("Translation from khz to jtag_speed not implemented");
-	return ERROR_FAIL;
-}
-
-static int default_speed_div(int speed, int *khz)
-{
-	LOG_ERROR("Translation from jtag_speed to khz not implemented");
-	return ERROR_FAIL;
-}
-
-static int default_power_dropout(int *dropout)
-{
-	*dropout = 0; /* by default we can't detect power dropout */
-	return ERROR_OK;
-}
-
-static int default_srst_asserted(int *srst_asserted)
-{
-	*srst_asserted = 0; /* by default we can't detect srst asserted */
-	return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_interface_list_command)
-{
-	if (strcmp(CMD_NAME, "interface_list") == 0 && CMD_ARGC > 0)
-		return ERROR_COMMAND_SYNTAX_ERROR;
-
-	command_print(CMD_CTX, "The following debug interfaces are available:");
-	for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
-	{
-		const char *name = jtag_interfaces[i]->name;
-		command_print(CMD_CTX, "%u: %s", i + 1, name);
-	}
-
-	return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_interface_command)
-{
-	/* check whether the interface is already configured */
-	if (jtag_interface)
-	{
-		LOG_WARNING("Interface already configured, ignoring");
-		return ERROR_OK;
-	}
-
-	/* interface name is a mandatory argument */
-	if (CMD_ARGC != 1 || CMD_ARGV[0][0] == '\0')
-		return ERROR_COMMAND_SYNTAX_ERROR;
-
-	for (unsigned i = 0; NULL != jtag_interfaces[i]; i++)
-	{
-		if (strcmp(CMD_ARGV[0], jtag_interfaces[i]->name) != 0)
-			continue;
-
-		if (NULL != jtag_interfaces[i]->commands)
-		{
-			int retval = register_commands(CMD_CTX, NULL,
-					jtag_interfaces[i]->commands);
-			if (ERROR_OK != retval)
-				return retval;
-		}
-
-		jtag_interface = jtag_interfaces[i];
-
-		if (jtag_interface->khz == NULL)
-			jtag_interface->khz = default_khz;
-		if (jtag_interface->speed_div == NULL)
-			jtag_interface->speed_div = default_speed_div;
-		if (jtag_interface->power_dropout == NULL)
-			jtag_interface->power_dropout = default_power_dropout;
-		if (jtag_interface->srst_asserted == NULL)
-			jtag_interface->srst_asserted = default_srst_asserted;
-
-		return ERROR_OK;
-	}
-
-	/* no valid interface was found (i.e. the configuration option,
-	 * didn't match one of the compiled-in interfaces
-	 */
-	LOG_ERROR("The specified debug interface was not found (%s)", CMD_ARGV[0]);
-	CALL_COMMAND_HANDLER(handle_interface_list_command);
-	return ERROR_JTAG_INVALID_INTERFACE;
-}
-
 COMMAND_HANDLER(handle_scan_chain_command)
 {
 	struct jtag_tap *tap;
@@ -1096,217 +990,6 @@ COMMAND_HANDLER(handle_scan_chain_command)
 	return ERROR_OK;
 }
 
-COMMAND_HANDLER(handle_reset_config_command)
-{
-	int new_cfg = 0;
-	int mask = 0;
-
-	/* Original versions cared about the order of these tokens:
-	 *   reset_config signals [combination [trst_type [srst_type]]]
-	 * They also clobbered the previous configuration even on error.
-	 *
-	 * Here we don't care about the order, and only change values
-	 * which have been explicitly specified.
-	 */
-	for (; CMD_ARGC; CMD_ARGC--, CMD_ARGV++) {
-		int tmp = 0;
-		int m;
-
-		/* gating */
-		m = RESET_SRST_NO_GATING;
-		if (strcmp(*CMD_ARGV, "srst_gates_jtag") == 0)
-			/* default: don't use JTAG while SRST asserted */;
-		else if (strcmp(*CMD_ARGV, "srst_nogate") == 0)
-			tmp = RESET_SRST_NO_GATING;
-		else
-			m = 0;
-		if (mask & m) {
-			LOG_ERROR("extra reset_config %s spec (%s)",
-					"gating", *CMD_ARGV);
-			return ERROR_INVALID_ARGUMENTS;
-		}
-		if (m)
-			goto next;
-
-		/* signals */
-		m = RESET_HAS_TRST | RESET_HAS_SRST;
-		if (strcmp(*CMD_ARGV, "none") == 0)
-			tmp = RESET_NONE;
-		else if (strcmp(*CMD_ARGV, "trst_only") == 0)
-			tmp = RESET_HAS_TRST;
-		else if (strcmp(*CMD_ARGV, "srst_only") == 0)
-			tmp = RESET_HAS_SRST;
-		else if (strcmp(*CMD_ARGV, "trst_and_srst") == 0)
-			tmp = RESET_HAS_TRST | RESET_HAS_SRST;
-		else
-			m = 0;
-		if (mask & m) {
-			LOG_ERROR("extra reset_config %s spec (%s)",
-					"signal", *CMD_ARGV);
-			return ERROR_INVALID_ARGUMENTS;
-		}
-		if (m)
-			goto next;
-
-		/* combination (options for broken wiring) */
-		m = RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
-		if (strcmp(*CMD_ARGV, "separate") == 0)
-			/* separate reset lines - default */;
-		else if (strcmp(*CMD_ARGV, "srst_pulls_trst") == 0)
-			tmp |= RESET_SRST_PULLS_TRST;
-		else if (strcmp(*CMD_ARGV, "trst_pulls_srst") == 0)
-			tmp |= RESET_TRST_PULLS_SRST;
-		else if (strcmp(*CMD_ARGV, "combined") == 0)
-			tmp |= RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST;
-		else
-			m = 0;
-		if (mask & m) {
-			LOG_ERROR("extra reset_config %s spec (%s)",
-					"combination", *CMD_ARGV);
-			return ERROR_INVALID_ARGUMENTS;
-		}
-		if (m)
-			goto next;
-
-		/* trst_type (NOP without HAS_TRST) */
-		m = RESET_TRST_OPEN_DRAIN;
-		if (strcmp(*CMD_ARGV, "trst_open_drain") == 0)
-			tmp |= RESET_TRST_OPEN_DRAIN;
-		else if (strcmp(*CMD_ARGV, "trst_push_pull") == 0)
-			/* push/pull from adapter - default */;
-		else
-			m = 0;
-		if (mask & m) {
-			LOG_ERROR("extra reset_config %s spec (%s)",
-					"trst_type", *CMD_ARGV);
-			return ERROR_INVALID_ARGUMENTS;
-		}
-		if (m)
-			goto next;
-
-		/* srst_type (NOP without HAS_SRST) */
-		m |= RESET_SRST_PUSH_PULL;
-		if (strcmp(*CMD_ARGV, "srst_push_pull") == 0)
-			tmp |= RESET_SRST_PUSH_PULL;
-		else if (strcmp(*CMD_ARGV, "srst_open_drain") == 0)
-			/* open drain from adapter - default */;
-		else
-			m = 0;
-		if (mask & m) {
-			LOG_ERROR("extra reset_config %s spec (%s)",
-					"srst_type", *CMD_ARGV);
-			return ERROR_INVALID_ARGUMENTS;
-		}
-		if (m)
-			goto next;
-
-		/* caller provided nonsense; fail */
-		LOG_ERROR("unknown reset_config flag (%s)", *CMD_ARGV);
-		return ERROR_INVALID_ARGUMENTS;
-
-next:
-		/* Remember the bits which were specified (mask)
-		 * and their new values (new_cfg).
-		 */
-		mask |= m;
-		new_cfg |= tmp;
-	}
-
-	/* clear previous values of those bits, save new values */
-	if (mask) {
-		int old_cfg = jtag_get_reset_config();
-
-		old_cfg &= ~mask;
-		new_cfg |= old_cfg;
-		jtag_set_reset_config(new_cfg);
-	} else
-		new_cfg = jtag_get_reset_config();
-
-
-	/*
-	 * Display the (now-)current reset mode
-	 */
-	char *modes[5];
-
-	/* minimal JTAG has neither SRST nor TRST (so that's the default) */
-	switch (new_cfg & (RESET_HAS_TRST | RESET_HAS_SRST)) {
-	case RESET_HAS_SRST:
-		modes[0] = "srst_only";
-		break;
-	case RESET_HAS_TRST:
-		modes[0] = "trst_only";
-		break;
-	case RESET_TRST_AND_SRST:
-		modes[0] = "trst_and_srst";
-		break;
-	default:
-		modes[0] = "none";
-		break;
-	}
-
-	/* normally SRST and TRST are decoupled; but bugs happen ... */
-	switch (new_cfg & (RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST)) {
-	case RESET_SRST_PULLS_TRST:
-		modes[1] = "srst_pulls_trst";
-		break;
-	case RESET_TRST_PULLS_SRST:
-		modes[1] = "trst_pulls_srst";
-		break;
-	case RESET_SRST_PULLS_TRST | RESET_TRST_PULLS_SRST:
-		modes[1] = "combined";
-		break;
-	default:
-		modes[1] = "separate";
-		break;
-	}
-
-	/* TRST-less connectors include Altera, Xilinx, and minimal JTAG */
-	if (new_cfg & RESET_HAS_TRST) {
-		if (new_cfg & RESET_TRST_OPEN_DRAIN)
-			modes[3] = " trst_open_drain";
-		else
-			modes[3] = " trst_push_pull";
-	} else
-		modes[3] = "";
-
-	/* SRST-less connectors include TI-14, Xilinx, and minimal JTAG */
-	if (new_cfg & RESET_HAS_SRST) {
-		if (new_cfg & RESET_SRST_NO_GATING)
-			modes[2] = " srst_nogate";
-		else
-			modes[2] = " srst_gates_jtag";
-
-		if (new_cfg & RESET_SRST_PUSH_PULL)
-			modes[4] = " srst_push_pull";
-		else
-			modes[4] = " srst_open_drain";
-	} else {
-		modes[2] = "";
-		modes[4] = "";
-	}
-
-	command_print(CMD_CTX, "%s %s%s%s%s",
-			modes[0], modes[1],
-			modes[2], modes[3], modes[4]);
-
-	return ERROR_OK;
-}
-
-COMMAND_HANDLER(handle_adapter_nsrst_delay_command)
-{
-	if (CMD_ARGC > 1)
-		return ERROR_COMMAND_SYNTAX_ERROR;
-	if (CMD_ARGC == 1)
-	{
-		unsigned delay;
-		COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
-
-		jtag_set_nsrst_delay(delay);
-	}
-	command_print(CMD_CTX, "adapter_nsrst_delay: %u", jtag_get_nsrst_delay());
-	return ERROR_OK;
-}
-
 COMMAND_HANDLER(handle_jtag_ntrst_delay_command)
 {
 	if (CMD_ARGC > 1)
@@ -1322,21 +1005,6 @@ COMMAND_HANDLER(handle_jtag_ntrst_delay_command)
 	return ERROR_OK;
 }
 
-COMMAND_HANDLER(handle_adapter_nsrst_assert_width_command)
-{
-	if (CMD_ARGC > 1)
-		return ERROR_COMMAND_SYNTAX_ERROR;
-	if (CMD_ARGC == 1)
-	{
-		unsigned delay;
-		COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], delay);
-
-		jtag_set_nsrst_assert_width(delay);
-	}
-	command_print(CMD_CTX, "adapter_nsrst_assert_width: %u", jtag_get_nsrst_assert_width());
-	return ERROR_OK;
-}
-
 COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command)
 {
 	if (CMD_ARGC > 1)
@@ -1352,35 +1020,6 @@ COMMAND_HANDLER(handle_jtag_ntrst_assert_width_command)
 	return ERROR_OK;
 }
 
-COMMAND_HANDLER(handle_adapter_khz_command)
-{
-	if (CMD_ARGC > 1)
-		return ERROR_COMMAND_SYNTAX_ERROR;
-
-	int retval = ERROR_OK;
-	if (CMD_ARGC == 1)
-	{
-		unsigned khz = 0;
-		COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], khz);
-
-		retval = jtag_config_khz(khz);
-		if (ERROR_OK != retval)
-			return retval;
-	}
-
-	int cur_speed = jtag_get_speed_khz();
-	retval = jtag_get_speed_readable(&cur_speed);
-	if (ERROR_OK != retval)
-		return retval;
-
-	if (cur_speed)
-		command_print(CMD_CTX, "%d kHz", cur_speed);
-	else
-		command_print(CMD_CTX, "RCLK - adaptive");
-
-	return retval;
-}
-
 COMMAND_HANDLER(handle_jtag_rclk_command)
 {
 	if (CMD_ARGC > 1)
@@ -1608,69 +1247,6 @@ COMMAND_HANDLER(handle_tms_sequence_command)
 	return ERROR_OK;
 }
 
-static const struct command_registration interface_command_handlers[] = {
-	{
-		.name = "adapter_khz",
-		.handler = handle_adapter_khz_command,
-		.mode = COMMAND_ANY,
-		.help = "With an argument, change to the specified maximum "
-			"jtag speed.  For JTAG, 0 KHz signifies adaptive "
-			" clocking. "
-			"With or without argument, display current setting.",
-		.usage = "[khz]",
-	},
-	{
-		.name = "adapter_nsrst_assert_width",
-		.handler = handle_adapter_nsrst_assert_width_command,
-		.mode = COMMAND_ANY,
-		.help = "delay after asserting SRST in ms",
-		.usage = "[milliseconds]",
-	},
-	{
-		.name = "adapter_nsrst_delay",
-		.handler = handle_adapter_nsrst_delay_command,
-		.mode = COMMAND_ANY,
-		.help = "delay after deasserting SRST in ms",
-		.usage = "[milliseconds]",
-	},
-	{
-		.name = "interface",
-		.handler = handle_interface_command,
-		.mode = COMMAND_CONFIG,
-		.help = "Select a debug adapter interface (driver)",
-		.usage = "driver_name",
-	},
-	{
-		.name = "interface_list",
-		.handler = handle_interface_list_command,
-		.mode = COMMAND_ANY,
-		.help = "List all built-in debug adapter interfaces (drivers)",
-	},
-	{
-		.name = "reset_config",
-		.handler = handle_reset_config_command,
-		.mode = COMMAND_ANY,
-		.help = "configure adapter reset behavior",
-		.usage = "[none|trst_only|srst_only|trst_and_srst] "
-			"[srst_pulls_trst|trst_pulls_srst|combined|separate] "
-			"[srst_gates_jtag|srst_nogate] "
-			"[trst_push_pull|trst_open_drain] "
-			"[srst_push_pull|srst_open_drain]",
-	},
-	COMMAND_REGISTRATION_DONE
-};
-
-/**
- * Register the commands which deal with arbitrary debug adapter drivers.
- *
- * @todo Remove internal assumptions that all debug adapters use JTAG for
- * transport.  Various types and data structures are not named generically.
- */
-int interface_register_commands(struct command_context *ctx)
-{
-	return register_commands(ctx, NULL, interface_command_handlers);
-}
-
 static const struct command_registration jtag_command_handlers[] = {
 	{
 		.name = "jtag_rclk",