diff --git a/Documentation/debugger.rst b/Documentation/debugger.rst
index b0207c489ee3237a995880501285a52c73c18e2d..4c34ca0290a243dd264bddf33edc65ff240a4cdd 100644
--- a/Documentation/debugger.rst
+++ b/Documentation/debugger.rst
@@ -115,6 +115,12 @@ command to soft-reset card10.
    ...
    (gdb)
 
+.. note::
+   You will also find the following self-describing gdb files in the firmware
+   root directory, which do not require additional arguments:
+   ``flash-all.gdb,  flash-bootloader.gdb,  
+   flash-both.gdb,  flash-epicardium.gdb,  flash-pycardium.gdb``
+
 .. warning::
    If you are used to use ``mon reset halt``, be aware that the card10 prototypes
    do not connect the reset line to the debugger. OpenOCD is configured to only do
diff --git a/openocd/scripts/target/max32665.cfg b/openocd/scripts/target/max32665.cfg
index c79eb6fc324379bc6d824be4a49fa9b30c4bbf22..4a3487e405a315b1e652cf76ee893e97b4000863 100644
--- a/openocd/scripts/target/max32665.cfg
+++ b/openocd/scripts/target/max32665.cfg
@@ -1,6 +1,9 @@
 # Maxim Integrated MAX32665 OpenOCD target configuration file
 # www.maximintegrated.com
 
+# selecting transport method, to prevenet auto-selecting something else
+transport select swd
+
 # Set the reset pin configuration
 reset_config none