From 3f4677f8b40b2f45d3ae9c8b03b8f09f841ffc2d Mon Sep 17 00:00:00 2001
From: Techy <jk-suess@web.de>
Date: Tue, 3 Sep 2019 16:03:55 +0000
Subject: [PATCH] fix(openocd-scripts): Always use SWD
OpenOCD tried
Info : auto-selecting first available session transport "jtag".
To override use 'transport select <transport>'.
using a JLink debugger. Overriding it with SWD is what I did. With the
CMSIS debugger OpenOCD you get lucky:
Info : auto-selecting first available session transport "swd".
Hope forcing it always to SWD will make it easier for others using
different debuggers.
---
Documentation/debugger.rst | 6 ++++++
openocd/scripts/target/max32665.cfg | 3 +++
2 files changed, 9 insertions(+)
diff --git a/Documentation/debugger.rst b/Documentation/debugger.rst
index b0207c48..4c34ca02 100644
--- a/Documentation/debugger.rst
+++ b/Documentation/debugger.rst
@@ -115,6 +115,12 @@ command to soft-reset card10.
...
(gdb)
+.. note::
+ You will also find the following self-describing gdb files in the firmware
+ root directory, which do not require additional arguments:
+ ``flash-all.gdb, flash-bootloader.gdb,
+ flash-both.gdb, flash-epicardium.gdb, flash-pycardium.gdb``
+
.. warning::
If you are used to use ``mon reset halt``, be aware that the card10 prototypes
do not connect the reset line to the debugger. OpenOCD is configured to only do
diff --git a/openocd/scripts/target/max32665.cfg b/openocd/scripts/target/max32665.cfg
index c79eb6fc..4a3487e4 100644
--- a/openocd/scripts/target/max32665.cfg
+++ b/openocd/scripts/target/max32665.cfg
@@ -1,6 +1,9 @@
# Maxim Integrated MAX32665 OpenOCD target configuration file
# www.maximintegrated.com
+# selecting transport method, to prevenet auto-selecting something else
+transport select swd
+
# Set the reset pin configuration
reset_config none
--
GitLab