Random reboots during boot

Having these random crashes that sometimes happen during boot where it restarts a couple times until it finally manages to boot.

This could maybe relate to this error that pops up shortly before the reset

E (1720) flow3r-imu: bmp5_init: Error [-5] : Power up error

Here a video of how that looks like and the mpremote logs (manually re-engaged when it dipped)

https://www.dropbox.com/scl/fi/t3mnq2no4p2p8yjdqf142/2023-10-03-23.07.01.mp4?rlkey=r8l9b4b7u8wuuz7rojul7d8jx&dl=0

timon@timon-ThinkPad-T480s:~/flow3r/flow3r-firmware$ mpremote
Connected to MicroPython at /dev/ttyACM0
Use Ctrl-] or Ctrl-x to exit this shell
device disconnected
                   timon@timon-ThinkPad-T480s:~/flow3r/flow3r-firmware$ mpremote
Connected to MicroPython at /dev/ttyACM0
Use Ctrl-] or Ctrl-x to exit this shell
4.186 st3m.power (DEBUG): percentage: 95 %
4.187 st3m.power (DEBUG): prev: [1, 1, 95] %
4.189 st3m.power (DEBUG): percentage: 95 %
4.19 st3m.power (DEBUG): prev: [1, 95, 95] %
4.192 st3m.power (DEBUG): percentage: 96 %
4.193 st3m.power (DEBUG): prev: [95, 95, 96] %
4.196 st3m.power (DEBUG): percentage: 96 %
4.197 st3m.power (DEBUG): prev: [95, 96, 96] %
4.205 st3m.power (DEBUG): percentage: 96 %
4.206 st3m.power (DEBUG): prev: [96, 96, 96] %
device disconnected
                   timon@timon-ThinkPad-T480s:~/flow3r/flow3r-firmware$ mpremote
Connected to MicroPython at /dev/ttyACM0
Use Ctrl-] or Ctrl-x to exit this shell
E (1720) flow3r-imu: bmp5_init: Error [-5] : Power up error
4.186 st3m.power (DEBUG): percentage: 99 %
4.187 st3m.power (DEBUG): prev: [1, 1, 99] %
4.189 st3m.power (DEBUG): percentage: 99 %
4.19 st3m.power (DEBUG): prev: [1, 99, 99] %
4.192 st3m.power (DEBUG): percentage: 99 %
4.193 st3m.power (DEBUG): prev: [99, 99, 99] %
4.196 st3m.power (DEBUG): percentage: 99 %
4.198 st3m.power (DEBUG): prev: [99, 99, 99] %
4.205 st3m.power (DEBUG): percentage: 88 %
4.206 st3m.power (DEBUG): prev: [99, 99, 88] %
device disconnected
                   timon@timon-ThinkPad-T480s:~/flow3r/flow3r-firmware$ mpremote
Connected to MicroPython at /dev/ttyACM0
Use Ctrl-] or Ctrl-x to exit this shell
E (1720) flow3r-imu: bmp5_init: Error [-5] : Power up error
4.449 st3m.settings (WARNING): Could not load settings: [Errno 2] ENOENT
6.517 st3m.run (INFO): starting main
6.52 st3m.run (INFO): free memory: 5918496
8.588 st3m.application (WARNING): Could not discover bundles in /flash/apps: [Errno 2] ENOENT
8.591 st3m.application (WARNING): Could not discover bundles in /sd/apps: [Errno 2] ENOENT
E (11980) flow3r-spio: flow3r_bsp_spio_charger_state_get: 1
8.846 st3m.power (DEBUG): has battery: False