diff --git a/Documentation/bluetooth/card10.rst b/Documentation/bluetooth/card10.rst
new file mode 100644
index 0000000000000000000000000000000000000000..a5646c9baca364974f0efc460d44fa944cee47ac
--- /dev/null
+++ b/Documentation/bluetooth/card10.rst
@@ -0,0 +1,62 @@
+Bluetooth Card10 Service
+==========
+
+.. warning::
+ The specification is still work in progress
+
+The Card10 Service implemented a direct Hardware access of the card10.
+
+BLE Service
+-----------
+
+The current draft uses following service specification:
+
+- Service
+
+ UUID: ``0000f000-2342-2342-2342-234223422342``
+
+- light sensor characteristic:
+
+ UUID: ``0000f0f0-2342-2342-2342-234223422342``
+ read
+
+- Vibra characteristic:
+
+ UUID: ``0000f10f-2342-2342-2342-234223422342``
+ write
+
+- Rockets characteristic:
+
+ UUID: ``0000f110-2342-2342-2342-234223422342``
+ write
+
+light sensor characteristic
+---------------------------------
+
+The light sensor characteristic makes it possible to read the current value of the light sensor by receiving a ``uint16``.
+
+- reading of ``0x0e00`` means **14**
+
+vibra characteristic
+---------------------------------
+
+The vibra characteristic makes it possible to let the card10 for given millisecound in a ``uint16`` vibrate.
+
+- One secound: ``0xe803``
+
+Rockets characteristic
+---------------------------------
+
+The Rockets characteristic makes it possible to address every three rockets.
+Just write there three byte array, one for evey rocket.
+
+Dataformat:
+
+======= ======= =======
+ 0 1 2
+------- ------- -------
+rocket0 rocket1 rocket2
+======= ======= =======
+
+- Enable only Rocket 1: ``0xff0000``
+- Enable all rockets with 50% lightness: ``0x7f7f7f``
diff --git a/epicardium/ble/ble.c b/epicardium/ble/ble.c
index 9a2da1942627e02ca57bbdf518464c59ec3e37b4..a2cdf9e41a99e654a2ff1aa61b180531dd467d2e 100644
--- a/epicardium/ble/ble.c
+++ b/epicardium/ble/ble.c
@@ -47,6 +47,7 @@ static int lasttick = 0;
extern void StackInit(void);
extern void AppInit(void);
extern void bleuart_init(void);
+extern void bleCard10_init(void);
/*************************************************************************************************/
void PalSysAssertTrap(void)
@@ -191,6 +192,7 @@ void vBleTask(void *pvParameters)
AttsDynInit();
bleuart_init();
+ bleCard10_init();
lasttick = xTaskGetTickCount();
diff --git a/epicardium/ble/card10.c b/epicardium/ble/card10.c
new file mode 100644
index 0000000000000000000000000000000000000000..e2fa96e5dea1c16659eb06bcc34051cd44df8644
--- /dev/null
+++ b/epicardium/ble/card10.c
@@ -0,0 +1,262 @@
+#include "wsf_types.h"
+#include "wsf_os.h"
+#include "wsf_buf.h"
+#include "wsf_timer.h"
+#include "wsf_trace.h"
+#include "app_ui.h"
+#include "fit/fit_api.h"
+#include "hci_vs.h"
+
+#include "ff.h"
+
+#include "util/bstream.h"
+#include "att_api.h"
+
+#include "FreeRTOS.h"
+#include "crc32.h"
+
+#include "epicardium.h"
+
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+#include <machine/endian.h>
+
+#define CARD10_UUID_SUFFIX \
+ 0x42, 0x23, 0x42, 0x23, 0x42, 0x23, 0x42, 0x23, 0x42, 0x23, 0x42, 0x23
+
+/*!< \brief Service start handle. */
+#define CARD10_START_HDL 0x920
+/*!< \brief Service end handle. */
+#define CARD10_END_HDL (CARD10_MAX_HDL - 1)
+
+/*
+ * This has to match in order and number of members to the functions
+ * called in fileTransAddGroupDyn() otherwise the stack breaks.
+ */
+enum {
+ /*!< \brief card10 service declaration */
+ CARD10_SVC_HDL = CARD10_START_HDL,
+ /*!< \brief vibra characteristic */
+ CARD10_VIRBA_CH_HDL,
+ CARD10_VIBRA_VAL_HDL,
+ /*!< \brief rockets led characteristic */
+ CARD10_ROCKETS_CH_HDL,
+ CARD10_ROCKETS_VAL_HDL,
+ /*!< \brief light sensor characteristic */
+ CARD10_LIGHT_SENSOR_CH_HDL,
+ CARD10_LIGHT_SENSOR_VAL_HDL,
+ /*!< \brief Maximum handle. */
+ CARD10_MAX_HDL
+};
+
+/* BLE UUID for card10 service*/
+static const uint8_t UUID_svc[] = { CARD10_UUID_SUFFIX, 0x0, 0xf0, 0x0, 0x0 };
+
+/* BLE UUID for card10 char vibra */
+static const uint8_t UUID_char_vibra[] = { ATT_PROP_WRITE_NO_RSP,
+ UINT16_TO_BYTES(
+ CARD10_VIBRA_VAL_HDL),
+ CARD10_UUID_SUFFIX,
+ 0xf,
+ 0xf1,
+ 0x0,
+ 0x0 };
+
+static const uint8_t UUID_attChar_vibra[] = {
+ CARD10_UUID_SUFFIX, 0xf, 0xf1, 0x0, 0x0
+};
+
+/* BLE UUID for card10 char rockets */
+static const uint8_t UUID_char_rockets[] = { ATT_PROP_WRITE_NO_RSP,
+ UINT16_TO_BYTES(
+ CARD10_ROCKETS_VAL_HDL),
+ CARD10_UUID_SUFFIX,
+ 0x10,
+ 0xf1,
+ 0x0,
+ 0x0 };
+
+static const uint8_t UUID_attChar_rockets[] = {
+ CARD10_UUID_SUFFIX, 0x10, 0xf1, 0x0, 0x0
+};
+
+/* BLE UUID for card10 char light sensor */
+static const uint8_t UUID_char_light_sensor[] = {
+ ATT_PROP_READ,
+ UINT16_TO_BYTES(CARD10_LIGHT_SENSOR_VAL_HDL),
+ CARD10_UUID_SUFFIX,
+ 0xf0,
+ 0xf0,
+ 0x0,
+ 0x0
+};
+static const uint8_t UUID_attChar_light_sensor[] = {
+ CARD10_UUID_SUFFIX, 0xf0, 0xf0, 0x0, 0x0
+};
+
+/*
+ * Create the BLE service description.
+ */
+static void *addCard10GroupDyn(void)
+{
+ void *pSHdl;
+
+ uint8_t initLightSensorValue[] = { UINT16_TO_BYTES(0) };
+
+ /* Create the service */
+ pSHdl = AttsDynCreateGroup(CARD10_START_HDL, CARD10_END_HDL);
+ if (pSHdl != NULL) {
+ /* Primary service */
+ AttsDynAddAttrConst(
+ pSHdl,
+ attPrimSvcUuid,
+ UUID_svc,
+ sizeof(UUID_svc),
+ 0,
+ ATTS_PERMIT_READ
+ );
+
+ // VIBRA
+
+ AttsDynAddAttrConst(
+ pSHdl,
+ attChUuid,
+ UUID_char_vibra,
+ sizeof(UUID_char_vibra),
+ 0,
+ ATTS_PERMIT_READ
+ );
+
+ AttsDynAddAttr(
+ pSHdl,
+ UUID_attChar_vibra,
+ NULL,
+ sizeof(uint16_t),
+ sizeof(uint16_t),
+ ATTS_SET_WRITE_CBACK,
+ ATTS_PERMIT_WRITE
+ );
+
+ // ROCKETS
+
+ AttsDynAddAttrConst(
+ pSHdl,
+ attChUuid,
+ UUID_char_rockets,
+ sizeof(UUID_char_rockets),
+ 0,
+ ATTS_PERMIT_READ
+ );
+
+ AttsDynAddAttr(
+ pSHdl,
+ UUID_attChar_rockets,
+ NULL,
+ 3 * sizeof(uint8_t),
+ 3 * sizeof(uint8_t),
+ ATTS_SET_WRITE_CBACK,
+ ATTS_PERMIT_WRITE
+ );
+
+ // LIGHT_SENSOR
+
+ AttsDynAddAttrConst(
+ pSHdl,
+ attChUuid,
+ UUID_char_light_sensor,
+ sizeof(UUID_char_light_sensor),
+ 0,
+ ATTS_PERMIT_READ
+ );
+
+ AttsDynAddAttr(
+ pSHdl,
+ UUID_attChar_light_sensor,
+ initLightSensorValue,
+ sizeof(uint8_t),
+ sizeof(uint8_t),
+ ATTS_SET_READ_CBACK,
+ ATTS_PERMIT_READ
+ );
+
+ APP_TRACE_INFO0("ble-card10: services binded\n");
+ }
+ return pSHdl;
+}
+
+/*
+ * BLE file transfer write callback.
+ *
+ * This gets called when data is written by a BLE central to our BLE
+ * peripheral. Here we take care of handling the received data.
+ */
+
+static uint8_t writeCard10CB(
+ dmConnId_t connId,
+ uint16_t handle,
+ uint8_t operation,
+ uint16_t offset,
+ uint16_t len,
+ uint8_t *pValue,
+ attsAttr_t *pAttr
+) {
+ uint16_t ui16;
+
+ switch (handle) {
+ case CARD10_VIBRA_VAL_HDL:
+ BYTES_TO_UINT16(ui16, pValue);
+ epic_vibra_vibrate(ui16);
+ APP_TRACE_INFO1("ble-card10: set vibra for %dms\n", ui16);
+ return ATT_SUCCESS;
+ case CARD10_ROCKETS_VAL_HDL:
+ epic_leds_set_rocket(0, pValue[0]);
+ epic_leds_set_rocket(1, pValue[1]);
+ epic_leds_set_rocket(2, pValue[2]);
+ APP_TRACE_INFO3(
+ "ble-card10: set rockets 0:%d, 1:%d, 2:%d\n",
+ pValue[0],
+ pValue[1],
+ pValue[2]
+ );
+ return ATT_SUCCESS;
+ default:
+ APP_TRACE_INFO1(
+ "ble-card10: unsupported characteristic: %c\n", handle
+ );
+ return ATT_ERR_HANDLE;
+ }
+}
+
+static uint8_t readCard10CB(
+ dmConnId_t connId,
+ uint16_t handle,
+ uint8_t operation,
+ uint16_t offset,
+ attsAttr_t *pAttr
+) {
+ uint16_t ui16 = 0;
+
+ switch (handle) {
+ case CARD10_LIGHT_SENSOR_VAL_HDL:
+ epic_light_sensor_run();
+ epic_light_sensor_get(&ui16);
+ // epic_light_sensor_stop(); stop it everywhere, also in py
+ *pAttr->pValue = ui16;
+ APP_TRACE_INFO1("ble-card10: read lightsensor: %d\n", ui16);
+ return ATT_SUCCESS;
+ default:
+ APP_TRACE_INFO0("ble-card10: read no handler found\n");
+ return ATT_ERR_HANDLE;
+ }
+}
+
+/*
+ * This registers and starts the BLE file transfer service.
+ */
+
+void bleCard10_init(void)
+{
+ void *pSHdl = addCard10GroupDyn();
+ AttsDynRegister(pSHdl, readCard10CB, writeCard10CB);
+}
diff --git a/epicardium/ble/meson.build b/epicardium/ble/meson.build
index 02f2eeb58e44eb2840f3bb8bc0a1cf979822bad1..b3571e64ffca91a111f8e26719e53eedfd13b134 100644
--- a/epicardium/ble/meson.build
+++ b/epicardium/ble/meson.build
@@ -7,5 +7,6 @@ ble_sources = files(
'app/app_main.c',
'app/common/app_db.c',
'app/common/app_ui.c',
- 'uart.c'
+ 'uart.c',
+ 'card10.c',
)