From 952ec092e1f2ecc9ec861e30bf7a3ac6dabc5f6f Mon Sep 17 00:00:00 2001
From: Rahix <rahix@rahix.de>
Date: Mon, 15 Jul 2019 13:39:33 +0200
Subject: [PATCH] doc: Reorder info-boxes in flashing guide
Signed-off-by: Rahix <rahix@rahix.de>
---
Documentation/how-to-flash.rst | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/Documentation/how-to-flash.rst b/Documentation/how-to-flash.rst
index 42e5b6fd..a4c61f49 100644
--- a/Documentation/how-to-flash.rst
+++ b/Documentation/how-to-flash.rst
@@ -38,6 +38,11 @@ your new firmware boot up!
Flash Using Debugger
--------------------
+First, setup everything as explained on the :ref:`debugger` page. Following
+that and after connecting to card10, you can flash your binary using the
+``load`` command. After loading, you need to use ``reset`` to reboot card10
+using your new firmware.
+
.. warning::
With the current version of the bootloader, before attempting to flash using
@@ -45,11 +50,15 @@ Flash Using Debugger
If there is, the bootloader will overwrite whatever you just flashed after
reboot every time.
-First, setup everything as explained on the :ref:`debugger` page. Following
-that and after connecting to card10, you can flash your binary using the
-``load`` command. After loading, you need to use ``reset`` to reboot card10
-using your new firmware.
+.. code-block:: text
+ (gdb) load
+ Loading section .text, size 0x12514 lma 0x10010000
+ Loading section .ARM.exidx, size 0x8 lma 0x10022514
+ Loading section .data, size 0x8d8 lma 0x1002251c
+ Start address 0x10012160, load size 77300
+ Transfer rate: 19 KB/sec, 11042 bytes/write.
+ (gdb)
.. note::
@@ -64,13 +73,3 @@ using your new firmware.
Reason: The Epicardium puts parts of the CPU to sleep and the debugging
interface is part of that. After a reset the bootloader starts up
and lets OpenOCD/GDB take control again.
-
-.. code-block:: text
-
- (gdb) load
- Loading section .text, size 0x12514 lma 0x10010000
- Loading section .ARM.exidx, size 0x8 lma 0x10022514
- Loading section .data, size 0x8d8 lma 0x1002251c
- Start address 0x10012160, load size 77300
- Transfer rate: 19 KB/sec, 11042 bytes/write.
- (gdb)
--
GitLab