diff --git a/Hello_World/Makefile b/Hello_World/Makefile
index e67468b08cfd33342c091ce5a342dba26f933f87..d95c515ecd6b1edaa063707a0d36dc4cdb3830b0 100644
--- a/Hello_World/Makefile
+++ b/Hello_World/Makefile
@@ -69,6 +69,7 @@ CMSIS_ROOT=$(LIBS_DIR)/CMSIS
SRCS = main.c
SRCS += ../lib/card10/oled96.c
SRCS += ../lib/card10/fonts.c
+SRCS += ../lib/card10/pmic.c
SRCS += bhy_support.c bhy_uc_driver.c bhy.c
SRCS += MAX77650-Arduino-Library.c
# Where to find source files for this test
diff --git a/Hello_World/main.c b/Hello_World/main.c
index 2b9e2565e1542f9c96bdbd768e4cf7f3ec49db01..65ddbcf0bddaa794c010e031446115dd6947f870 100644
--- a/Hello_World/main.c
+++ b/Hello_World/main.c
@@ -56,7 +56,7 @@
#include "bhy.h"
#include "Bosch_PCB_7183_di03_BMI160_BMM150-7183_di03.2.1.11696_170103.h"
#include "bhy_uc_driver.h"
-#include "MAX77650-Arduino-Library.h"
+#include "pmic.h"
/***** Definitions *****/
@@ -98,75 +98,6 @@ uint32_t ecg_read_reg(uint8_t reg)
return (rx_data[1] << 16) | (rx_data[2] << 8) | rx_data[3];
}
-void pmic_init(void)
-{
- uint8_t didm = MAX77650_getDIDM();
- uint8_t cid = MAX77650_getChipID();
- printf("MAX7765x DIDM: 0x%02x CID: 0x%02x\n", didm, cid);
-
- //MAX77650_setIP_SBB0(0b11); //Limit output of SBB0 to 500mA
- MAX77650_setTV_SBB0(0b101000); //Set output Voltage of SBB0 to 1.8V
- MAX77650_setADE_SBB0(0b0); //Disable Active Discharge at SBB0 Output
- MAX77650_setEN_SBB0(0b110); //Enable SBB0 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
-
- //MAX77650_setIP_SBB1(0b11); //Limit output of SBB1 to 500mA
-#if BOARD_EVKIT
- MAX77650_setTV_SBB1(0b100000); //Set output Voltage of SBB1 to 1.2V
-#else
- MAX77650_setTV_SBB1(0b001001); //Set output Voltage of SBB1 to 3.3V
-#endif
- MAX77650_setADE_SBB1(0b0); //Disable Active Discharge at SBB1 Output
- MAX77650_setEN_SBB1(0b110); //Enable SBB1 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
-
- //MAX77650_setIP_SBB2(0b11); //Limit output of SBB2 to 500mA
-#if BOARD_EVKIT
- MAX77650_setTV_SBB2(0b110010); //Set output Voltage of SBB2 to 3.3V
-#else
- MAX77650_setTV_SBB2(0b110100); //Set output Voltage of SBB2 to 5.0V
-#endif
- MAX77650_setADE_SBB2(0b0); //Disable Active Discharge at SBB2 Output
- MAX77650_setEN_SBB2(0b110); //Enable SBB2 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
-
-
- // Prepare the PMIC LEDs
- MAX77650_setLED_FS0(0b01);
- MAX77650_setINV_LED0(false); //LED red: phase operation
- MAX77650_setBRT_LED0(0b00000); //LED red: brightness
- MAX77650_setP_LED0(0b1111); //LED red: LED period
- MAX77650_setD_LED0(0b1111); //LED red: LED duty-cycle
-
- MAX77650_setLED_FS1(0b01);
- MAX77650_setINV_LED1(false); //LED green: phase operation
- MAX77650_setBRT_LED1(0b00000); //LED green: brightness
- MAX77650_setP_LED1(0b1111); //LED green: LED period
- MAX77650_setD_LED1(0b1111); //LED green: LED duty-cycle
-
- MAX77650_setLED_FS2(0b01);
- MAX77650_setINV_LED2(false); //LED blue: phase operation
- MAX77650_setBRT_LED2(0b00000); //LED blue: brightness
- MAX77650_setP_LED2(0b1111); //LED blue: LED period
- MAX77650_setD_LED2(0b1111); //LED blue: LED duty-cycle
-
- MAX77650_setEN_LED_MSTR(true); //LEDs Master enable
-}
-
-void set_led(uint8_t led, uint8_t val)
-{
- if(led == 0) {
- MAX77650_setLED_FS0(val > 0 ? 0b01 : 0);
- MAX77650_setBRT_LED0(val);
- }
- if(led == 1) {
- MAX77650_setLED_FS1(val > 0 ? 0b01 : 0);
- MAX77650_setBRT_LED1(val);
- }
- if(led == 2) {
- MAX77650_setLED_FS2(val > 0 ? 0b01 : 0);
- MAX77650_setBRT_LED2(val);
- }
-
-}
-
// *****************************************************************************
int main(void)
{
@@ -235,27 +166,28 @@ int main(void)
pmic_init();
while (1) {
- set_led(0, 33);
- set_led(1, 0);
- set_led(2, 0);
- TMR_Delay(MXC_TMR0, MSEC(500), 0);
-
- set_led(0, 0);
- set_led(1, 33);
- set_led(2, 0);
- TMR_Delay(MXC_TMR0, MSEC(500), 0);
-
- set_led(0, 0);
- set_led(1, 0);
- set_led(2, 33);
- TMR_Delay(MXC_TMR0, MSEC(500), 0);
-
- set_led(0, 0);
- set_led(1, 0);
- set_led(2, 0);
+ pmic_set_led(0, 31);
+ pmic_set_led(1, 0);
+ pmic_set_led(2, 0);
+ TMR_Delay(MXC_TMR0, MSEC(200), 0);
+
+ pmic_set_led(0, 0);
+ pmic_set_led(1, 31);
+ pmic_set_led(2, 0);
+ TMR_Delay(MXC_TMR0, MSEC(200), 0);
+
+ pmic_set_led(0, 0);
+ pmic_set_led(1, 0);
+ pmic_set_led(2, 31);
+ TMR_Delay(MXC_TMR0, MSEC(200), 0);
+
+ pmic_set_led(0, 0);
+ pmic_set_led(1, 0);
+ pmic_set_led(2, 0);
GPIO_OutSet(&motor_pin);
TMR_Delay(MXC_TMR0, MSEC(500), 0);
GPIO_OutClr(&motor_pin);
+ TMR_Delay(MXC_TMR0, MSEC(1000), 0);
printf("count = %d\n", count++);
}
}
diff --git a/lib/card10/pmic.c b/lib/card10/pmic.c
new file mode 100644
index 0000000000000000000000000000000000000000..6701a4d230d1d53d72c33c50824a3238b81b114a
--- /dev/null
+++ b/lib/card10/pmic.c
@@ -0,0 +1,75 @@
+#include "i2c.h"
+#include "pmic.h"
+#include "MAX77650-Arduino-Library.h"
+#include <stdint.h>
+#include <stdio.h>
+
+void pmic_init(void)
+{
+ uint8_t didm = MAX77650_getDIDM();
+ uint8_t cid = MAX77650_getChipID();
+ printf("MAX7765x DIDM: 0x%02x CID: 0x%02x\n", didm, cid);
+
+ //MAX77650_setIP_SBB0(0b11); //Limit output of SBB0 to 500mA
+ MAX77650_setTV_SBB0(0b101000); //Set output Voltage of SBB0 to 1.8V
+ MAX77650_setADE_SBB0(0b0); //Disable Active Discharge at SBB0 Output
+ MAX77650_setEN_SBB0(0b110); //Enable SBB0 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
+
+ //MAX77650_setIP_SBB1(0b11); //Limit output of SBB1 to 500mA
+#if BOARD_EVKIT
+ MAX77650_setTV_SBB1(0b100000); //Set output Voltage of SBB1 to 1.2V
+#else
+ MAX77650_setTV_SBB1(0b001001); //Set output Voltage of SBB1 to 3.3V
+#endif
+ MAX77650_setADE_SBB1(0b0); //Disable Active Discharge at SBB1 Output
+ MAX77650_setEN_SBB1(0b110); //Enable SBB1 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
+
+ //MAX77650_setIP_SBB2(0b11); //Limit output of SBB2 to 500mA
+#if BOARD_EVKIT
+ MAX77650_setTV_SBB2(0b110010); //Set output Voltage of SBB2 to 3.3V
+#else
+ MAX77650_setTV_SBB2(0b110100); //Set output Voltage of SBB2 to 5.0V
+#endif
+ MAX77650_setADE_SBB2(0b0); //Disable Active Discharge at SBB2 Output
+ MAX77650_setEN_SBB2(0b110); //Enable SBB2 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
+
+ // Prepare the PMIC LEDs
+ MAX77650_setLED_FS0(0b11);
+ MAX77650_setINV_LED0(false); //LED red: phase operation
+ MAX77650_setBRT_LED0(0b00000); //LED red: brightness
+ MAX77650_setP_LED0(0b1111); //LED red: LED period
+ MAX77650_setD_LED0(0b1111); //LED red: LED duty-cycle
+
+ MAX77650_setLED_FS1(0b11);
+ MAX77650_setINV_LED1(false); //LED green: phase operation
+ MAX77650_setBRT_LED1(0b00000); //LED green: brightness
+ MAX77650_setP_LED1(0b1111); //LED green: LED period
+ MAX77650_setD_LED1(0b1111); //LED green: LED duty-cycle
+
+ MAX77650_setLED_FS2(0b11);
+ MAX77650_setINV_LED2(false); //LED blue: phase operation
+ MAX77650_setBRT_LED2(0b00000); //LED blue: brightness
+ MAX77650_setP_LED2(0b1111); //LED blue: LED period
+ MAX77650_setD_LED2(0b1111); //LED blue: LED duty-cycle
+
+ MAX77650_setEN_LED_MSTR(true); //LEDs Master enable
+}
+
+void pmic_set_led(uint8_t led, uint8_t val)
+{
+ if(led == 0) {
+ MAX77650_setLED_FS0(val > 0 ? 0b01 : 0);
+ MAX77650_setBRT_LED0(val);
+ }
+ if(led == 1) {
+ MAX77650_setLED_FS1(val > 0 ? 0b01 : 0);
+ MAX77650_setBRT_LED1(val);
+ }
+ if(led == 2) {
+ MAX77650_setLED_FS2(val > 0 ? 0b01 : 0);
+ MAX77650_setBRT_LED2(val);
+ }
+
+}
+
+
diff --git a/lib/card10/pmic.h b/lib/card10/pmic.h
new file mode 100644
index 0000000000000000000000000000000000000000..43dd99612faa6623cbf6e2cf488af624c2320d9a
--- /dev/null
+++ b/lib/card10/pmic.h
@@ -0,0 +1,9 @@
+#ifndef PMIC_H
+#define PMIC_H
+
+#include <stdint.h>
+
+void pmic_init(void);
+void pmic_set_led(uint8_t led, uint8_t val);
+
+#endif