lib/sdk/Applications/EvKitExamples/BLE_datc/config.mk

+# Specifies whether the legacy 4.2 api should be used.
+# 1 by default.
+# Set to 1 to use 4.2 advertisements.
+# Set to 0 to use 5.0 extended advertisements.
+BTLE_APP_USE_LEGACY_API?=1
+
+# Specifies whether scan requests should be transmitted.
+BTLE_APP_USE_ACTIVE_SCANNING?=1
+
+# UART used for console output.
+# 1 by default.
+CONSOLE_UART?=1
+
+# Run link layer using SDMA.
+ENABLE_SDMA?=0

lib/sdk/Applications/EvKitExamples/BLE_datc/datc_main.c

@@ -86,6 +86,7 @@ struct
   Configurable Parameters
 **************************************************************************************************/
 
+#ifdef BTLE_APP_USE_LEGACY_API
 /*! configurable parameters for master */
 static const appMasterCfg_t datcMasterCfg =
 {
@@ -93,9 +94,46 @@ static const appMasterCfg_t datcMasterCfg =
   420,                                     /*! The scan window, in 0.625 ms units  */
   0,                                       /*! The scan duration in ms */
   DM_DISC_MODE_NONE,                       /*! The GAP discovery mode */
-  DM_SCAN_TYPE_ACTIVE                      /*! The scan type (active or passive) */
+#ifdef BTLE_APP_USE_ACTIVE_SCANNING
+  DM_SCAN_TYPE_ACTIVE
+#else /* BTLE_APP_USE_ACTIVE_SCANNING */
+  DM_SCAN_TYPE_PASSIVE
+#endif /* BTLE_APP_USE_ACTIVE_SCANNING */
+                                           /*!< The scan type (active or passive) */
 };
 
+#else /* BTLE_APP_USE_LEGACY_API */
+/*! configurable parameters for extended master */
+static const uint8_t datcExtMasterScanPhysCfg =
+  HCI_SCAN_PHY_LE_1M_BIT |
+  //HCI_SCAN_PHY_LE_2M_BIT |
+  //HCI_SCAN_PHY_LE_CODED_BIT |
+  0;
+static const appExtMasterCfg_t datcExtMasterCfg =
+{
+  { 420, 420, 420 },                       /*! \brief The scan interval, in 0.625 ms units */
+  { 420, 420, 420 },                       /*! \brief The scan window, in 0.625 ms units.   Must be less than or equal to scan interval. */
+  0,                                       /*! \brief The scan duration in ms.  Set to zero or both duration and period to non-zero to scan until stopped. */
+  0,                                       /*! \brief The scan period, in 1.28 sec units.  Set to zero to disable periodic scanning. */
+  DM_DISC_MODE_NONE,                       /*! \brief The GAP discovery mode (general, limited, or none) */
+#ifdef BTLE_APP_USE_ACTIVE_SCANNING
+  {
+    DM_SCAN_TYPE_ACTIVE,
+    DM_SCAN_TYPE_ACTIVE,
+    DM_SCAN_TYPE_ACTIVE
+  }
+#else /* BTLE_APP_USE_ACTIVE_SCANNING */
+  {
+    DM_SCAN_TYPE_PASSIVE,
+    DM_SCAN_TYPE_PASSIVE,
+    DM_SCAN_TYPE_PASSIVE
+  }
+#endif /* BTLE_APP_USE_ACTIVE_SCANNING */
+                                           /*!< \brief The scan type (active or passive) */
+};
+
+#endif /* BTLE_APP_USE_LEGACY_API */
+
 /*! configurable parameters for security */
 static const appSecCfg_t datcSecCfg =
 {
@@ -123,8 +161,8 @@ static const smpCfg_t datcSmpCfg =
 /*! Connection parameters */
 static const hciConnSpec_t datcConnCfg =
 {
-  40,                                     /*! Minimum connection interval in 1.25ms units */
-  40,                                     /*! Maximum connection interval in 1.25ms units */
+  6,                                      /*! Minimum connection interval in 1.25ms units */
+  6,                                      /*! Maximum connection interval in 1.25ms units */
   0,                                      /*! Connection latency */
   600,                                    /*! Supervision timeout in 10ms units */
   0,                                      /*! Minimum CE length, in 0.625 ms units */
@@ -355,7 +393,11 @@ static void datcScanStop(dmEvt_t *pMsg)
     /* Open connection */
     if (datcConnInfo.doConnect)
     {
+#ifdef BTLE_APP_USE_LEGACY_API
       testCb.connId = AppConnOpen(datcConnInfo.addrType, datcConnInfo.addr, datcConnInfo.dbHdl);
+#else
+      testCb.connId = AppExtConnOpen(datcExtMasterScanPhysCfg, datcConnInfo.addrType, datcConnInfo.addr, datcConnInfo.dbHdl);
+#endif
       datcConnInfo.doConnect = FALSE;
     }
   }
@@ -453,6 +495,119 @@ static void datcScanReport(dmEvt_t *pMsg)
   }
 }
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+/*************************************************************************************************/
+/*!
+ *  \brief  Handle a scan report.
+ *
+ *  \param  pMsg    Pointer to DM callback event message.
+ *
+ *  \return None.
+ */
+/*************************************************************************************************/
+static void datcExtScanReport(dmEvt_t *pMsg)
+{
+  uint8_t *pData;
+  appDbHdl_t dbHdl;
+  bool_t  connect = FALSE;
+
+  /* disregard if not scanning or autoconnecting */
+  if (!datcCb.scanning || !datcCb.autoConnect)
+  {
+    return;
+  }
+
+  printf("datcExtScanReport() %x : %02x:%02x:%02x:%02x:%02x:%02x\n",
+      pMsg->extScanReport.addrType,
+      pMsg->extScanReport.addr[5],
+      pMsg->extScanReport.addr[4],
+      pMsg->extScanReport.addr[3],
+      pMsg->extScanReport.addr[2],
+      pMsg->extScanReport.addr[1],
+      pMsg->extScanReport.addr[0]);
+
+  printf("  directedAddr ( %x : %02x:%02x:%02x:%02x:%02x:%02x )\n",
+      pMsg->extScanReport.directAddrType,
+      pMsg->extScanReport.directAddr[5],
+      pMsg->extScanReport.directAddr[4],
+      pMsg->extScanReport.directAddr[3],
+      pMsg->extScanReport.directAddr[2],
+      pMsg->extScanReport.directAddr[1],
+      pMsg->extScanReport.directAddr[0]);
+
+  printf("  evtType %x,\n", pMsg->extScanReport.eventType);
+  printf("  addrType %x,\n", pMsg->extScanReport.addrType);
+  printf("  priPhy %u,\n", pMsg->extScanReport.priPhy);
+  printf("  secPhy %u,\n", pMsg->extScanReport.secPhy);
+  printf("  advSid 0x%02x,\n", pMsg->extScanReport.advSid);
+  printf("  txPower %i,\n", pMsg->extScanReport.txPower);
+  printf("  rssi %d,\n", pMsg->extScanReport.rssi);
+  printf("  perAdvInter %i,\n", pMsg->extScanReport.perAdvInter);
+  printf("  directAddrType %x,\n", pMsg->extScanReport.directAddrType);
+  printf("  len %u,\n", pMsg->extScanReport.len);
+
+  if (pMsg->extScanReport.pData[1] == DM_ADV_TYPE_LOCAL_NAME)
+  {
+    uint8_t name[32];
+    memset(name, 0, sizeof(name));
+    memcpy(name, &pMsg->extScanReport.pData[2], pMsg->extScanReport.pData[0]);
+    printf(" | %s\n", name);
+  }
+  else {
+    printf(", data");
+    int i;
+    for (i = 0; i < pMsg->extScanReport.len; i++) {
+      printf(" %02x", pMsg->extScanReport.pData[i]);
+    }
+    printf("\n");
+  }
+
+  /* if we already have a bond with this device then connect to it */
+  if ((dbHdl = AppDbFindByAddr(pMsg->extScanReport.addrType, pMsg->extScanReport.addr)) != APP_DB_HDL_NONE)
+  {
+    /* if this is a directed advertisement where the initiator address is an RPA */
+    if (DM_RAND_ADDR_RPA(pMsg->extScanReport.directAddr, pMsg->extScanReport.directAddrType))
+    {
+      /* resolve direct address to see if it's addressed to us */
+      AppMasterResolveAddr(pMsg, dbHdl, APP_RESOLVE_DIRECT_RPA);
+    }
+    else
+    {
+      connect = TRUE;
+    }
+  }
+  /* if the peer device uses an RPA */
+  else if (DM_RAND_ADDR_RPA(pMsg->extScanReport.addr, pMsg->extScanReport.addrType))
+  {
+    /* resolve advertiser's RPA to see if we already have a bond with this device */
+    AppMasterResolveAddr(pMsg, APP_DB_HDL_NONE, APP_RESOLVE_ADV_RPA);
+  }
+  /* find vendor-specific advertising data */
+  else if ((pData = DmFindAdType(DM_ADV_TYPE_MANUFACTURER, pMsg->extScanReport.len,
+                                 pMsg->extScanReport.pData)) != NULL)
+  {
+    /* check length and vendor ID */
+    if (pData[DM_AD_LEN_IDX] >= 3 && BYTES_UINT16_CMP(&pData[DM_AD_DATA_IDX], HCI_ID_ARM))
+    {
+      connect = TRUE;
+    }
+  }
+
+  if (connect)
+  {
+    /* stop scanning and connect */
+    datcCb.autoConnect = FALSE;
+    AppExtScanStop();
+
+    /* Store peer information for connect on scan stop */
+    datcConnInfo.addrType = DmHostAddrType(pMsg->extScanReport.addrType);
+    memcpy(datcConnInfo.addr, pMsg->extScanReport.addr, sizeof(bdAddr_t));
+    datcConnInfo.dbHdl = dbHdl;
+    datcConnInfo.doConnect = TRUE;
+  }
+}
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
 /*************************************************************************************************/
 /*!
  *  \brief  Perform UI actions on connection open.
@@ -483,7 +638,16 @@ static void datcClose(dmEvt_t *pMsg)
   if (!datcCb.scanning)
   {
     datcCb.autoConnect = TRUE;
+#ifdef BTLE_APP_USE_LEGACY_API
     AppScanStart(datcMasterCfg.discMode, datcMasterCfg.scanType, datcMasterCfg.scanDuration);
+#else /* BTLE_APP_USE_LEGACY_API */
+    AppExtScanStart(
+        datcExtMasterScanPhysCfg,
+        datcExtMasterCfg.discMode,
+        datcExtMasterCfg.scanType,
+        datcExtMasterCfg.scanDuration,
+        datcExtMasterCfg.scanPeriod);
+#endif /* BTLE_APP_USE_LEGACY_API */
   }
 }
 
@@ -522,16 +686,13 @@ static void datcSetup(dmEvt_t *pMsg)
   WsfTimerStartMs(&testCb.timer, 1000);
   testCb.connectCount = 0x80000000;
 
-  /* If this is defined to one, scanning will be limited to the EvKit dats peer */
-#if 0
+  /* Scanning will be limited to the EvKit dats peer */
   DmDevWhiteListAdd(DM_ADDR_PUBLIC, (bdAddr_t){0x02, 0x00, 0x44, 0x8B, 0x05, 0x00});
   DmDevSetFilterPolicy(DM_FILT_POLICY_MODE_SCAN, HCI_FILT_WHITE_LIST);
   DmDevSetFilterPolicy(DM_FILT_POLICY_MODE_INIT, HCI_FILT_WHITE_LIST);
-#endif
 
-  /* 0x3 : 1M and 2M PHYs */
-  DmSetDefaultPhy(0, 0x3, 0x3);
-  testCb.phy = 0x1;
+  DmSetDefaultPhy(0, HCI_PHY_LE_1M_BIT | HCI_PHY_LE_2M_BIT, HCI_PHY_LE_1M_BIT | HCI_PHY_LE_2M_BIT);
+  testCb.phy = HCI_PHY_LE_1M_BIT;
 
   DmConnSetConnSpec((hciConnSpec_t *) &datcConnCfg);
 }
@@ -676,7 +837,16 @@ static void testTimerHandler(void)
   if (testCb.counter == 2)
   {
     datcCb.autoConnect = TRUE;
+#ifdef BTLE_APP_USE_LEGACY_API
     AppScanStart(datcMasterCfg.discMode, datcMasterCfg.scanType, datcMasterCfg.scanDuration);
+#else /* BTLE_APP_USE_LEGACY_API */
+    AppExtScanStart(
+        datcExtMasterScanPhysCfg,
+        datcExtMasterCfg.discMode,
+        datcExtMasterCfg.scanType,
+        datcExtMasterCfg.scanDuration,
+        datcExtMasterCfg.scanPeriod);
+#endif /* BTLE_APP_USE_LEGACY_API */
   }
 
   if ((((testCb.counter - testCb.connectCount) % 5) == 0) &&
@@ -684,18 +854,19 @@ static void testTimerHandler(void)
       (datcCb.discState[testCb.connId-1] == DATC_DISC_SVC_MAX))
   {
     datcSendData(testCb.connId);
+    DmConnReadRssi(testCb.connId);
   }
 
   if ((((testCb.counter - testCb.connectCount) % 10) == 0) &&
       (testCb.connId != DM_CONN_ID_NONE) &&
       (datcCb.discState[testCb.connId-1] == DATC_DISC_SVC_MAX))
   {
-    if(testCb.phy == 0x1) {
+    if(testCb.phy == HCI_PHY_LE_1M_BIT) {
       /* Change from 1M to 2M PHY */
-      testCb.phy = 0x2;
+      testCb.phy = HCI_PHY_LE_2M_BIT;
     } else {
       /* Change from Coded to 1M PHY */
-      testCb.phy = 0x1;
+      testCb.phy = HCI_PHY_LE_1M_BIT;
     }
 
     DmSetPhy(testCb.connId, 0, testCb.phy, testCb.phy, 0);
@@ -723,6 +894,9 @@ static void datcProcMsg(dmEvt_t *pMsg)
       datcValueNtf((attEvt_t *) pMsg);
       break;
 
+    case ATTC_WRITE_CMD_RSP:
+      break;
+
     case DM_RESET_CMPL_IND:
       DmSecGenerateEccKeyReq();
       datcSetup(pMsg);
@@ -734,20 +908,44 @@ static void datcProcMsg(dmEvt_t *pMsg)
       uiEvent = APP_UI_SCAN_START;
       break;
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+    case DM_EXT_SCAN_START_IND:
+      datcScanStart(pMsg);
+      uiEvent = APP_UI_EXT_SCAN_START_IND;
+      break;
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
     case DM_SCAN_STOP_IND:
       datcScanStop(pMsg);
       uiEvent = APP_UI_SCAN_STOP;
       break;
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+    case DM_EXT_SCAN_STOP_IND:
+      datcScanStop(pMsg);
+      uiEvent = APP_UI_EXT_SCAN_STOP_IND;
+      break;
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
     case DM_SCAN_REPORT_IND:
       datcScanReport(pMsg);
       break;
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+    case DM_EXT_SCAN_REPORT_IND:
+      datcExtScanReport(pMsg);
+      break;
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
     case DM_CONN_OPEN_IND:
       datcOpen(pMsg);
       uiEvent = APP_UI_CONN_OPEN;
       break;
 
+    case DM_CONN_READ_RSSI_IND:
+      printf("Connection 0x%x RSSI: %d\n", pMsg->readRssi.handle, pMsg->readRssi.rssi);
+      break;
+
     case DM_CONN_CLOSE_IND:
       printf("Connection closed status 0x%x, reason 0x%x", pMsg->connClose.status, pMsg->connClose.reason);
       switch (pMsg->connClose.reason)
@@ -758,9 +956,6 @@ static void datcProcMsg(dmEvt_t *pMsg)
         case HCI_ERR_CONN_FAIL:         printf(" FAIL ESTABLISH\n");  break;
         case HCI_ERR_MIC_FAILURE:       printf(" MIC FAILURE\n");     break;
       }
-#if 0
-      WSF_ASSERT(0);
-#endif
       datcClose(pMsg);
       uiEvent = APP_UI_CONN_CLOSE;
       break;
@@ -816,6 +1011,13 @@ static void datcProcMsg(dmEvt_t *pMsg)
       testTimerHandler();
       break;
 
+    case DM_VENDOR_SPEC_IND:
+      break;
+
+    case DM_PHY_UPDATE_IND:
+      APP_TRACE_INFO2("DM_PHY_UPDATE_IND - RX: %d, TX: %d", pMsg->phyUpdate.rxPhy, pMsg->phyUpdate.txPhy);
+      break;
+
     default:
       break;
   }
@@ -846,7 +1048,11 @@ void DatcHandlerInit(wsfHandlerId_t handlerId)
   datcCb.hdlListLen = DATC_DISC_HDL_LIST_LEN;
 
   /* Set configuration pointers */
+#ifdef BTLE_APP_USE_LEGACY_API
   pAppMasterCfg = (appMasterCfg_t *) &datcMasterCfg;
+#else /* BTLE_APP_USE_LEGACY_API */
+  pAppExtMasterCfg = (appExtMasterCfg_t *) &datcExtMasterCfg;
+#endif /* BTLE_APP_USE_LEGACY_API */
   pAppSecCfg = (appSecCfg_t *) &datcSecCfg;
   pAppDiscCfg = (appDiscCfg_t *) &datcDiscCfg;
   pAppCfg = (appCfg_t *)&datcAppCfg;

lib/sdk/Applications/EvKitExamples/BLE_datc/main.c

@@ -29,26 +29,25 @@
  * property whatsoever. Maxim Integrated Products, Inc. retains all
  * ownership rights.
  *
- * $Date: 2019-02-11 23:36:35 +0000 (Mon, 11 Feb 2019) $
- * $Revision: 40967 $
+ * $Date: 2019-07-11 13:33:24 -0500 (Thu, 11 Jul 2019) $
+ * $Revision: 44549 $
  *
  ******************************************************************************/
 
 #include <stdio.h>
 #include <string.h>
+#include "mxc_config.h"
 #include "wsf_types.h"
 #include "wsf_os.h"
 #include "wsf_buf.h"
 #include "wsf_timer.h"
 #include "wsf_trace.h"
 #include "app_ui.h"
-#include "ll_api.h"
-#include "sch_api.h"
 #include "datc/datc_api.h"
-#include "mxc_config.h"
-#include "gcr_regs.h"
-#include "mcr_regs.h"
+#include "app_ui.h"
+#include "radio_drv.h"
 #include "hci_core.h"
+#include "hci_vs.h"
 
 /**************************************************************************************************
   Macros
@@ -56,6 +55,7 @@
 
 /* Number of WSF buffer pools */
 #define WSF_BUF_POOLS       6
+#define WSF_BUF_SIZE        0x1048
 
 /* Size of buffer for stdio functions */
 #define PRINTF_BUF_SIZE     128
@@ -64,12 +64,13 @@
   Local Variables
 **************************************************************************************************/
 
+uint32_t SystemHeapSize=WSF_BUF_SIZE;
+uint32_t SystemHeap[WSF_BUF_SIZE/4];
+uint32_t SystemHeapStart;
+
 /*! Buffer for stdio functions */
 char printf_buffer[PRINTF_BUF_SIZE];
 
-/*! Free memory for pool buffers (use word elements for word alignment). */
-static uint32_t mainBufMem[3584/sizeof(uint32_t)+96];
-
 /*! Default pool descriptor. */
 static wsfBufPoolDesc_t mainPoolDesc[WSF_BUF_POOLS] =
 {
@@ -78,7 +79,7 @@ static wsfBufPoolDesc_t mainPoolDesc[WSF_BUF_POOLS] =
   {  64,  4 },
   { 128,  4 },
   { 256,  4 },
-  { 384,  4 }
+  { 512,  4 }
 };
 
 /**************************************************************************************************
@@ -95,67 +96,53 @@ void SysTick_Handler(void)
 }
 
 /*************************************************************************************************/
-static void myTrace(const char *pStr, va_list args)
+static bool_t myTrace(const uint8_t *pBuf, uint32_t len)
 {
     extern uint8_t wsfCsNesting;
 
     if (wsfCsNesting == 0)
     {
-        vprintf(pStr, args);
-        printf("\r\n");
+        fwrite(pBuf, len, 1, stdout);
+        return TRUE;
     }
+
+    return FALSE;
 }
 
 /*************************************************************************************************/
-/*!
- *  \brief  Initialize WSF.
- *
- *  \return None.
- */
-/*************************************************************************************************/
-static void WsfInit(void)
+void PalSysAssertTrap(void)
 {
-    WsfTimerInit();
-    WsfBufInit(sizeof(mainBufMem), (uint8_t*)mainBufMem, WSF_BUF_POOLS, mainPoolDesc);
-    WsfTraceRegister(myTrace);
+    printf("Assertion detected\n");
+    while(1) {}
 }
 
 /*************************************************************************************************/
 /*!
- *  \brief  Initialize platform.
- *
- *  \param  msPerTick   Milliseconds per timer tick.
+ *  \brief  Initialize WSF.
  *
  *  \return None.
  */
 /*************************************************************************************************/
-void PlatformInit(void)
+static void WsfInit(void)
 {
-    /* Change the pullup on the RST pin to 25K */
-    MXC_MCR->ctrl = 0x202;
+    uint32_t bytesUsed;
 
-    /* Set VREGO_D to 1.3V */
-    *((volatile uint32_t*)0x40004410) = 0x50;
-
-    /* Set TX LDO to 1.1V and enable LDO. Set RX LDO to 0.9V and enable LDO */
-    MXC_GCR->btleldocn = 0xD9; // TX 1.1V RX 0.9V
-
-    /* Power up the 32MHz XO */
-    MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_X32M_EN;
-
-    /* Enable peripheral clocks */
-    MXC_GCR->perckcn0 &= ~(MXC_F_GCR_PERCKCN0_GPIO0D | MXC_F_GCR_PERCKCN0_GPIO1D);  // Clear GPIO0 and GPIO1 Disable
-    MXC_GCR->perckcn1 &= ~(MXC_F_GCR_PERCKCN1_BTLED | MXC_F_GCR_PERCKCN1_TRNGD );  // Clear BTLE and ICACHE0 disable
-    
-    /* setup the systick */
+    /* setup the systick for 1MS timer*/
     SysTick->LOAD = (SystemCoreClock / 1000) * WSF_MS_PER_TICK;
     SysTick->VAL = 0;
     SysTick->CTRL |= (SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_TICKINT_Msk);
 
-#ifndef __IAR_SYSTEMS_ICC__
-    /* Added to prevent printf() and friends from using malloc() */
-    setvbuf(stdout, printf_buffer, _IOLBF, PRINTF_BUF_SIZE);
-#endif
+    WsfTimerInit();
+
+    SystemHeapStart = (uint32_t)&SystemHeap;
+    memset(SystemHeap, 0, sizeof(SystemHeap));
+    printf("SystemHeapStart = 0x%x\n", SystemHeapStart);
+    printf("SystemHeapSize = 0x%x\n", SystemHeapSize);
+    bytesUsed = WsfBufInit(WSF_BUF_POOLS, mainPoolDesc);
+    printf("bytesUsed = 0x%x\n", bytesUsed);
+    
+    WsfTraceRegisterHandler(myTrace);
+    WsfTraceEnable(TRUE);
 }
 
 /*
@@ -171,37 +158,13 @@ void SetAddress(uint8_t event)
     switch (event) {
     case APP_UI_RESET_CMPL:
         printf("Setting address -- MAC %02X:%02X:%02X:%02X:%02X:%02X\n", bdAddr[5], bdAddr[4], bdAddr[3], bdAddr[2], bdAddr[1], bdAddr[0]);
-	    LlSetBdAddr((uint8_t*)&bdAddr);
-	    LlGetBdAddr(hciCoreCb.bdAddr);
+        HciVsSetBdAddr(bdAddr);
         break;
     default:
         break;
     }
 }
 
-/*************************************************************************************************/
-/*!
- *  \brief  Initialize MAC layer.
- *
- *  \param  None.
- *
- *  \return None.
- */
-/*************************************************************************************************/
-void MacInit(void)
-{
-    wsfHandlerId_t handlerId;
-
-    /* Initialize link layer. */
-    BbInit();
-    handlerId = WsfOsSetNextHandler(SchHandler);
-    SchInit(handlerId);
-    LlScanMasterInit();
-    LlConnMasterInit();
-    handlerId = WsfOsSetNextHandler(LlHandler);
-    LlHandlerInit(handlerId);
-}
-
 /*************************************************************************************************/
 /*!
  *  \fn     main
@@ -215,11 +178,15 @@ void MacInit(void)
 /*************************************************************************************************/
 int main(void)
 {
+
+#ifndef __IAR_SYSTEMS_ICC__
+    setvbuf(stdout, printf_buffer, _IOLBF, PRINTF_BUF_SIZE);
+#endif
+
     printf("\n\n***** MAX32665 BLE Data Collector *****\n");
 
-    PlatformInit();
+    /* Initialize Radio */
     WsfInit();
-    MacInit();
     StackInitDatc();
     DatcStart();
 

lib/sdk/Applications/EvKitExamples/BLE_datc/stack_datc.c

@@ -17,12 +17,12 @@
  */
 /*************************************************************************************************/
 
+#include <stdio.h>
+#include <string.h>
 #include "wsf_types.h"
 #include "wsf_os.h"
 #include "util/bstream.h"
-
 #include "datc/datc_api.h"
-
 #include "hci_handler.h"
 #include "dm_handler.h"
 #include "l2c_handler.h"
@@ -35,6 +35,57 @@
 #include "svc_dis.h"
 #include "svc_core.h"
 #include "sec_api.h"
+#include "ll_init_api.h"
+
+
+#define LL_IMPL_REV             0x2303
+
+#define LL_MEMORY_FOOTPRINT     0xc152
+
+uint8_t LlMem[LL_MEMORY_FOOTPRINT];
+
+const LlRtCfg_t _ll_cfg = {
+    /* Device */
+    /*compId*/                  LL_COMP_ID_ARM,
+    /*implRev*/                 LL_IMPL_REV,
+    /*btVer*/                   LL_VER_BT_CORE_SPEC_5_0,
+    /*_align32 */               0, // padding for alignment
+
+    /* Advertiser */
+    /*maxAdvSets*/              4, // 4 Extended Advertising Sets
+    /*maxAdvReports*/           8,
+    /*maxExtAdvDataLen*/        LL_MAX_ADV_DATA_LEN,
+    /*defExtAdvDataFrag*/       64,
+    /*auxDelayUsec*/            0,
+
+    /* Scanner */
+    /*maxScanReqRcvdEvt*/       4,
+    /*maxExtScanDataLen*/       LL_MAX_ADV_DATA_LEN,
+
+    /* Connection */
+    /*maxConn*/                 2,
+    /*numTxBufs*/               16,
+    /*numRxBufs*/               16,
+    /*maxAclLen*/               512,
+    /*defTxPwrLvl*/             0,
+    /*ceJitterUsec*/            0,
+
+    /* DTM */
+    /*dtmRxSyncMs*/             10000,
+
+    /* PHY */
+    /*phy2mSup*/                TRUE,
+    /*phyCodedSup*/             FALSE,
+    /*stableModIdxTxSup*/       FALSE,
+    /*stableModIdxRxSup*/       FALSE
+};
+
+const BbRtCfg_t _bb_cfg = {
+    /*clkPpm*/                  20,
+    /*rfSetupDelayUsec*/        BB_RF_SETUP_DELAY_US,
+    /*maxScanPeriodMsec*/       BB_MAX_SCAN_PERIOD_MS,
+    /*schSetupDelayUsec*/       BB_SCH_SETUP_DELAY_US
+};
 
 /*************************************************************************************************/
 /*!
@@ -46,29 +97,54 @@
 void StackInitDatc(void)
 {
   wsfHandlerId_t handlerId;
-  uint8_t features[sizeof(uint64_t)];
-  uint8_t mask[sizeof(uint64_t)];
+
+#ifndef ENABLE_SDMA
+  uint32_t memUsed;
+
+  /* Initialize link layer. */
+  LlInitRtCfg_t ll_init_cfg =
+  {
+      .pBbRtCfg     = &_bb_cfg,
+      .wlSizeCfg    = 4,
+      .rlSizeCfg    = 4,
+      .plSizeCfg    = 4,
+      .pLlRtCfg     = &_ll_cfg,
+      .pFreeMem     = LlMem,
+      .freeMemAvail = LL_MEMORY_FOOTPRINT
+  };
+
+  memUsed = LlInitControllerExtInit(&ll_init_cfg);
+  // memUsed = LlInitControllerInit(&ll_init_cfg);
+  if(memUsed != LL_MEMORY_FOOTPRINT)
+  {
+      printf("mem_used: 0x%x LL_MEMORY_FOOTPRINT: 0x%x\n", memUsed, 
+          LL_MEMORY_FOOTPRINT);
+  }
+#endif
 
   SecInit();
+  SecRandInit();
   SecAesInit();
   SecCmacInit();
   SecEccInit();
 
-  // Only use legacy API.
-  Uint64ToBstream(features, 0);
-  Uint64ToBstream(mask, HCI_LE_SUP_FEAT_LE_EXT_ADV);
-  HciVsSetFeatures(features, mask);
-
   handlerId = WsfOsSetNextHandler(HciHandler);
   HciHandlerInit(handlerId);
 
   handlerId = WsfOsSetNextHandler(DmHandler);
   DmDevVsInit(0);
   DmDevPrivInit();
+#ifdef BTLE_APP_USE_LEGACY_API
   DmScanInit();
   DmConnInit();
   DmConnMasterInit();
+#else /* BTLE_APP_USE_LEGACY_API */
+  DmExtScanInit();
+  DmConnInit();
+  DmExtConnMasterInit();
+#endif /* BTLE_APP_USE_LEGACY_API */
   DmSecInit();
+  DmPhyInit();
   DmSecLescInit();
   DmPrivInit();
   DmHandlerInit(handlerId);
@@ -81,6 +157,7 @@ void StackInitDatc(void)
   AttsInit();
   AttsIndInit();
   AttcInit();
+  AttsSignInit();
 
   handlerId = WsfOsSetNextHandler(SmpHandler);
   SmpHandlerInit(handlerId);

lib/sdk/Applications/EvKitExamples/BLE_dats/ARM/Abstract.txt

+BLE data transfer server example

lib/sdk/Applications/EvKitExamples/BLE_dats/ARM/BTLE_dats.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>Flash Debug</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>96000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\Listings\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>2</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMRTXEVENTFLAGS</Key>
+          <Name>-L70 -Z18 -C0 -M0 -T1</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGTARM</Key>
+          <Name>(1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>ARMDBGFLAGS</Key>
+          <Name></Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>DLGUARM</Key>
+          <Name></Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>CMSIS_AGDI</Key>
+          <Name>-X"CMSIS-DAP" -UMXIM00001c2400b00000000000000000 -O238 -S10 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO23 -FD20000000 -FC1000 -FN1 -FF0MAX32665.FLM -FS010000000 -FL0100000 -FP0($$Device:MAX32665$Flash\MAX32665.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>1</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>1</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>1</EnableFlashSeq>
+        <EnableLog>1</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>2000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\dats_main.c</PathWithFileName>
+      <FilenameWithoutPath>dats_main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\stack_dats.c</PathWithFileName>
+      <FilenameWithoutPath>stack_dats.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::BSP</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Bluetooth</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

lib/sdk/Applications/EvKitExamples/BLE_dats/ARM/BTLE_dats.uvprojx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Flash Debug</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>MAX32665:Cortex-M4</Device>
+          <Vendor>Maxim</Vendor>
+          <PackID>Maxim.MAX32665.0.3.0</PackID>
+          <PackURL>http://www.mxim.net/microcontroller/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00080000) IROM(0x10000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(96000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:MAX32665$Libraries\Device\Maxim\MAX32665\Include\max32665.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:MAX32665$SVD\MAX32665\max32665.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\Objects\</OutputDirectory>
+          <OutputName>BLE_dats</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\Listings\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> </SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x80000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>0</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x10000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\ble_sdma.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\main.c</FilePath>
+            </File>
+            <File>
+              <FileName>Abstract.txt</FileName>
+              <FileType>5</FileType>
+              <FilePath>.\Abstract.txt</FilePath>
+            </File>
+            <File>
+              <FileName>dats_main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\dats_main.c</FilePath>
+            </File>
+            <File>
+              <FileName>stack_dats.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\stack_dats.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>::BSP</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::Bluetooth</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::Device</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.2" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.4.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="MAX32665 BSP" Cclass="BSP" Cgroup="EvKit V1" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 BSP DEP">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="GPIO" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 CMSIS GPIO">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="Timers" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 CMSIS TIMER">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="UART" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 CMSIS UART">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="XiP Flash" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 CMSIS SPI XIP FLASH">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim BTLE" Cclass="Bluetooth" Cgroup="Bluetooth LE - Advertising" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+    </components>
+    <files>
+      <file attr="config" category="header" name="Libraries\Device\Maxim\MAX32665\Include\max32665.h" version="0.3.0">
+        <instance index="0" removed="1">RTE\Device\MAX32665\max32665.h</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos/>
+      </file>
+      <file attr="config" category="sourceAsm" condition="Startup ARM" name="Libraries\Device\Maxim\MAX32665\Source\ARM\startup_max32665.s" version="0.3.0">
+        <instance index="0" removed="1">RTE\Device\MAX32665\startup_max32665.s</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos/>
+      </file>
+      <file attr="config" category="sourceC" condition="Startup ARM" name="Libraries\Device\Maxim\MAX32665\Source\ARM\sub_main.c" version="0.3.0">
+        <instance index="0" removed="1">RTE\Device\MAX32665\sub_main.c</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos/>
+      </file>
+      <file attr="config" category="sourceC" name="Libraries\Device\Maxim\MAX32665\Source\system_max32665.c" version="0.3.0">
+        <instance index="0" removed="1">RTE\Device\MAX32665\system_max32665.c</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos/>
+      </file>
+      <file attr="config" category="header" name="Libraries\Device\Maxim\MAX32665\Include\max32665.h" version="0.3.0">
+        <instance index="0">RTE\Device\MAX32665_Cortex-M4\max32665.h</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+      <file attr="config" category="sourceAsm" condition="Startup ARM" name="Libraries\Device\Maxim\MAX32665\Source\ARM\startup_max32665.s" version="0.3.0">
+        <instance index="0">RTE\Device\MAX32665_Cortex-M4\startup_max32665.s</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+      <file attr="config" category="sourceC" name="Libraries\Device\Maxim\MAX32665\Source\system_max32665.c" version="0.3.0">
+        <instance index="0">RTE\Device\MAX32665_Cortex-M4\system_max32665.c</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+    </files>
+  </RTE>
+
+</Project>

lib/sdk/Applications/EvKitExamples/BLE_dats/ARM/ble_sdma.sct

+#! armcc -E 
+#include "./RTE/_Flash_Debug/RTE_Components.h"
+
+LR_IROM1 0x10000000 0x00100000  {    ; load region size_region
+  ER_IROM1 0x10000000 0x00100000  {  ; load address = execution address
+   *.o (RESET, +First)
+   *(InRoot$$Sections)
+   .ANY (+RO)
+   .ANY (+XO)
+  }
+  
+  #if BLE_SDMA
+  ER_OTP  0x20000000 0x00000040 {
+   .ANY (.otp)
+  }	  
+  ER_ARM_SHARED 0x20000040 0x00000200{
+   .ANY (.arm_shared)
+  } 
+  ER_SDMA_SHARED 0x20000240 0x00000200{
+   .ANY (.sdma_shared)
+  } 
+  #if BLE_SDMA_ADV
+	ER_SDMA 0x20000440 0x00027000{
+	.ANY (.sdma_code)
+	}
+	RW_IRAM1 0x20027440 0x00058BC0 {  ; RW data
+	.ANY (+RW +ZI)
+	}
+  #else
+	ER_SDMA 0x20000440 0x0002E000{
+	.ANY (.sdma_code)
+	}
+	RW_IRAM1 0x2002E440 0x00051BC0 {  ; RW data
+	.ANY (+RW +ZI)
+	}
+  #endif
+#else  
+	
+  RW_IRAM1 0x20000000 0x00080000  {  ; RW data
+   .ANY (+RW +ZI)
+  }
+#endif
+}
+
+	
\ No newline at end of file

lib/sdk/Applications/EvKitExamples/BLE_dats/IAR/BLE_dats.ewd

+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>Debug</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\debugger\MAX32665.ddf</state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>CMSISDAP_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\flashloader\FlashMAX32665.board</state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>5</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>ARMSIM_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>5</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+</project>

lib/sdk/Applications/EvKitExamples/BLE_dats/IAR/BLE_dats.ewp

+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>Debug</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>General</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <version>31</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>ExePath</name>
+                    <state>Debug\Exe</state>
+                </option>
+                <option>
+                    <name>ObjPath</name>
+                    <state>Debug\Obj</state>
+                </option>
+                <option>
+                    <name>ListPath</name>
+                    <state>Debug\List</state>
+                </option>
+                <option>
+                    <name>GEndianMode</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>Input description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>Output description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GOutputBinary</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGCoreOrChip</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelect</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelectSlave</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RTDescription</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OGProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>OGLastSavedByProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>GeneralEnableMisra</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVerbose</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGChipSelectEditMenu</name>
+                    <state>Default	None</state>
+                </option>
+                <option>
+                    <name>GenLowLevelInterface</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GEndianModeBE</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGBufferedTerminalOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenStdoutInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>RTConfigPath2</name>
+                    <state>$TOOLKIT_DIR$\inc\c\DLib_Config_Normal.h</state>
+                </option>
+                <option>
+                    <name>GBECoreSlave</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGUseCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OGUseCmsisDspLib</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibThreads</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CoreVariant</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>GFPUDeviceSlave</name>
+                    <state>Default	None</state>
+                </option>
+                <option>
+                    <name>FPU2</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NrRegs</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NEON</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GFPUCoreSlave2</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>OGCMSISPackSelectDevice</name>
+                </option>
+                <option>
+                    <name>OgLibHeap</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGLibAdditionalLocale</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenLocaleTags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLocaleDisplayOnly</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DSPExtension</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TrustZone</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZoneModes</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ICCARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>35</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCDefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>CCPreprocFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocComments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocLine</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCListCFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMnemonics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMessages</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagSuppress</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagRemark</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagWarning</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagError</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCAllowList</name>
+                    <version>1</version>
+                    <state>00000000</state>
+                </option>
+                <option>
+                    <name>CCDebugInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IEndianMode</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLangConformance</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSignedPlainChar</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRequirePrototypes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagWarnAreErr</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCompilerRuntimeInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OutputFile</name>
+                    <state>$FILE_BNAME$.o</state>
+                </option>
+                <option>
+                    <name>CCLibConfigHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>PreInclude</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CompilerMisraOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIncludePath2</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>CCStdIncCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCodeSection</name>
+                    <state>.text</state>
+                </option>
+                <option>
+                    <name>IProcessorMode2</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptStrategy</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptLevelSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>CCPosIndRopi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndRwpi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndNoDynInit</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccLang</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCDialect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccAllowVLA</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccStaticDestr</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccCppInlineSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccFloatSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptimizationNoSizeConstraints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptStrategySlave</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCGuardCalls</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccExceptions2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccRTTI2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OICompilerExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>AARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>10</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>AObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>ACaseSensitivity</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacroChars</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnWhat</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnOne</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ADebug</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AltRegisterNames</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ADefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>AList</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AListHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AListing</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Includes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacDefs</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacExps</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacExec</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OnlyAssed</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MultiLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLengthCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLength</name>
+                    <state>80</state>
+                </option>
+                <option>
+                    <name>TabSpacing</name>
+                    <state>8</state>
+                </option>
+                <option>
+                    <name>AXRef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDefines</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefInternal</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDual</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AOutputFile</name>
+                    <state>$FILE_BNAME$.o</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsEdit</name>
+                    <state>100</state>
+                </option>
+                <option>
+                    <name>AIgnoreStdInclude</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AUserIncludes</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsCheckV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsV2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AsmNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>OBJCOPY</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OOCOutputFormat</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCOutputOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OOCOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OOCCommandLineProducer</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OOCObjCopyEnable</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CUSTOM</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <extensions></extensions>
+                <cmdline></cmdline>
+                <hasPrio>0</hasPrio>
+            </data>
+        </settings>
+        <settings>
+            <name>BICOMP</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+        <settings>
+            <name>BUILDACTION</name>
+            <archiveVersion>1</archiveVersion>
+            <data>
+                <prebuild></prebuild>
+                <postbuild></postbuild>
+            </data>
+        </settings>
+        <settings>
+            <name>ILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>22</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>IlinkLibIOConfig</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>XLinkMisraHandler</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkInputFileSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOutputFile</name>
+                    <state>BLE_dats.out</state>
+                </option>
+                <option>
+                    <name>IlinkDebugInfoEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkKeepSymbols</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySymbol</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySegment</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryAlign</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkConfigDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkMapFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogInitialization</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogModule</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogSection</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogVeneer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfOverride</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\linker\MAX32665_BLECO.icf</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFileSlave</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkSuppressDiags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsRem</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsWarn</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsErr</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkWarningsAreErrors</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkUseExtraOptions</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkLowLevelInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAutoLibEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAdditionalLibs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkOverrideProgramEntryLabel</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabelSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabel</name>
+                    <state>__iar_program_start</state>
+                </option>
+                <option>
+                    <name>DoFill</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>FillerByte</name>
+                    <state>0xFF</state>
+                </option>
+                <option>
+                    <name>FillerStart</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>FillerEnd</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>CrcSize</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcAlign</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcPoly</name>
+                    <state>0x11021</state>
+                </option>
+                <option>
+                    <name>CrcCompl</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcBitOrder</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcInitialValue</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>DoCrc</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkBufferedTerminalOutput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkStdoutInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcFullSize</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIElfToolPostProcess</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogAutoLibSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogRedirSymbols</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogUnusedFragments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcReverseByteOrder</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcUseAsInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptInline</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsAllow</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsForce</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptMergeDuplSections</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptUseVfe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptForceVfe</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackAnalysisEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackControlFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkStackCallGraphFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CrcAlgorithm</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcUnitSize</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkThreadsSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogCallGraph</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile_AltDefault</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkHeapSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLocaleSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkTrustzoneImportLibraryOut</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>OILinkExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IARCHIVE</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>IarchiveInputs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IarchiveOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IarchiveOutput</name>
+                    <state>###Unitialized###</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>BILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>General</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <version>31</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>ExePath</name>
+                    <state>Release\Exe</state>
+                </option>
+                <option>
+                    <name>ObjPath</name>
+                    <state>Release\Obj</state>
+                </option>
+                <option>
+                    <name>ListPath</name>
+                    <state>Release\List</state>
+                </option>
+                <option>
+                    <name>GEndianMode</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>Input description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>Output description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GOutputBinary</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGCoreOrChip</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelect</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelectSlave</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RTDescription</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OGProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>OGLastSavedByProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>GeneralEnableMisra</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVerbose</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGChipSelectEditMenu</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLowLevelInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GEndianModeBE</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGBufferedTerminalOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenStdoutInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>RTConfigPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GBECoreSlave</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGUseCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OGUseCmsisDspLib</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibThreads</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CoreVariant</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>GFPUDeviceSlave</name>
+                    <state>-</state>
+                </option>
+                <option>
+                    <name>FPU2</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NrRegs</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NEON</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GFPUCoreSlave2</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGCMSISPackSelectDevice</name>
+                </option>
+                <option>
+                    <name>OgLibHeap</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGLibAdditionalLocale</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenLocaleTags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLocaleDisplayOnly</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DSPExtension</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZone</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZoneModes</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ICCARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>35</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCDefines</name>
+                    <state>NDEBUG</state>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>CCPreprocFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocComments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocLine</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCListCFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMnemonics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMessages</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagSuppress</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagRemark</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagWarning</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagError</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCAllowList</name>
+                    <version>1</version>
+                    <state>11111110</state>
+                </option>
+                <option>
+                    <name>CCDebugInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IEndianMode</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLangConformance</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSignedPlainChar</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRequirePrototypes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagWarnAreErr</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCompilerRuntimeInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLibConfigHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>PreInclude</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CompilerMisraOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIncludePath2</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>CCStdIncCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCodeSection</name>
+                    <state>.text</state>
+                </option>
+                <option>
+                    <name>IProcessorMode2</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptLevel</name>
+                    <state>3</state>
+                </option>
+                <option>
+                    <name>CCOptStrategy</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptLevelSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>CCPosIndRopi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndRwpi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndNoDynInit</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccLang</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCDialect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccAllowVLA</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccStaticDestr</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccCppInlineSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccFloatSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptimizationNoSizeConstraints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptStrategySlave</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCGuardCalls</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccExceptions2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccRTTI2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OICompilerExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>AARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>10</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>AObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>ACaseSensitivity</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacroChars</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnWhat</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnOne</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ADebug</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AltRegisterNames</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ADefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>AList</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AListHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AListing</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Includes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacDefs</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacExps</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacExec</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OnlyAssed</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MultiLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLengthCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLength</name>
+                    <state>80</state>
+                </option>
+                <option>
+                    <name>TabSpacing</name>
+                    <state>8</state>
+                </option>
+                <option>
+                    <name>AXRef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDefines</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefInternal</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDual</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ALimitErrorsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsEdit</name>
+                    <state>100</state>
+                </option>
+                <option>
+                    <name>AIgnoreStdInclude</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AUserIncludes</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsCheckV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsV2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AsmNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>OBJCOPY</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OOCOutputFormat</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCOutputOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OOCOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OOCCommandLineProducer</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OOCObjCopyEnable</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CUSTOM</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <extensions></extensions>
+                <cmdline></cmdline>
+                <hasPrio>0</hasPrio>
+            </data>
+        </settings>
+        <settings>
+            <name>BICOMP</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+        <settings>
+            <name>BUILDACTION</name>
+            <archiveVersion>1</archiveVersion>
+            <data>
+                <prebuild></prebuild>
+                <postbuild></postbuild>
+            </data>
+        </settings>
+        <settings>
+            <name>ILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>22</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>IlinkLibIOConfig</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>XLinkMisraHandler</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkInputFileSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOutputFile</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>IlinkDebugInfoEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkKeepSymbols</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySymbol</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySegment</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryAlign</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkConfigDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkMapFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogInitialization</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogModule</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogSection</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogVeneer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfOverride</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\linker\MAX32665_BLECO.icf</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFileSlave</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkSuppressDiags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsRem</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsWarn</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsErr</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkWarningsAreErrors</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkUseExtraOptions</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkLowLevelInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAutoLibEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAdditionalLibs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkOverrideProgramEntryLabel</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabelSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabel</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoFill</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>FillerByte</name>
+                    <state>0xFF</state>
+                </option>
+                <option>
+                    <name>FillerStart</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>FillerEnd</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>CrcSize</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcAlign</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcPoly</name>
+                    <state>0x11021</state>
+                </option>
+                <option>
+                    <name>CrcCompl</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcBitOrder</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcInitialValue</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>DoCrc</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkBufferedTerminalOutput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkStdoutInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcFullSize</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIElfToolPostProcess</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogAutoLibSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogRedirSymbols</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogUnusedFragments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcReverseByteOrder</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcUseAsInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptInline</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsAllow</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsForce</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptMergeDuplSections</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptUseVfe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptForceVfe</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackAnalysisEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackControlFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkStackCallGraphFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CrcAlgorithm</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcUnitSize</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkThreadsSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogCallGraph</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile_AltDefault</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkHeapSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLocaleSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkTrustzoneImportLibraryOut</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>OILinkExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IARCHIVE</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>IarchiveInputs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IarchiveOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IarchiveOutput</name>
+                    <state>###Unitialized###</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>BILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+    </configuration>
+    <file>
+        <name>$PROJ_DIR$\..\main.c</name>
+    </file>
+    <file>
+        <name>$PROJ_DIR$\..\stack_dats.c</name>
+    </file>
+    <file>
+        <name>$PROJ_DIR$\..\dats_main.c</name>
+    </file>
+    <group>
+        <name>CMSIS-Pack</name>
+        <tag>CMSISPack.Component</tag>
+        <group>
+            <name>Maxim MAX32665 BSP _BSP.EvKit V1_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Source/board.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/led.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/mx25.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/pb.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/stdio.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.GPIO_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/gpio.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.Startup_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\cmain.s</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\low_level_init.c</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\max32665.h</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_assert.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_delay.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_lock.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_pins.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_sys.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/nvic_table.c</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\startup_max32665.s</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\system_max32665.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.Timers_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/tmr.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/tmr_utils.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.UART_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/uart.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.XiP Flash_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/spixf.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/spixfc.c</name>
+            </file>
+        </group>
+
+        <file>
+            <name>$PROJ_DIR$\RTE\RTE_Components.h</name>
+        </file>
+    </group>
+    <cmsisPackSettings>
+        <rte>&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
+
+&lt;configuration xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"&gt;
+
+  &lt;packages/&gt;
+
+  &lt;device Dclock="96000000" Dcore="Cortex-M4" DcoreVersion="r0p1" Dendian="Little-endian" Dfamily="MAX32665-66" Dfpu="SP_FPU" Dmpu="NO_MPU" Dname="MAX32665" Dvendor="Maxim:23" Pname="Cortex-M4" Punits="2" info="ARM Cortex-M4 96 MHz, 512 kB RAM, 1 MB ROM" url="http://www.keil.com/dd2/maxim/max32665"&gt;
+
+    &lt;package info="Maxim Integrated MAX32665 Series Device Support, Board Support Package and Examples" name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+  &lt;/device&gt;
+
+  &lt;toolchain Tcompiler="IAR" Toutput="exe"/&gt;
+
+  &lt;components&gt;
+
+    &lt;component Cbundle="MAX32665 BSP" Cclass="BSP" Cgroup="EvKit V1" Cvendor="Maxim" Cversion="0.3.0"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="include" name="Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Include/"/&gt;
+
+      &lt;file category="include" name="Boards/Maxim/MAX32665_EVKIT/Common/Include/"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Source/board.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/stdio.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/pb.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/led.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/mx25.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1"&gt;
+
+      &lt;package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/&gt;
+
+      &lt;file category="doc" name="CMSIS/Documentation/Core/html/index.html"/&gt;
+
+      &lt;file category="include" name="CMSIS/Include/"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="GPIO" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/gpio.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="include" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Include/" version="0.3.0"/&gt;
+
+      &lt;file category="include" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Include/" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceAsm" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/startup_max32665.s" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceC" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/low_level_init.c" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceAsm" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/cmain.s" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceC" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/system_max32665.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/nvic_table.c" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="header" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Include/max32665.h" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_assert.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_delay.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_lock.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_pins.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_sys.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/nvic_table.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="UART" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/uart.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="XiP Flash" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/spixfc.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/spixf.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+     
+     &lt;component Cbundle="Maxim BTLE" Cclass="Bluetooth" Cgroup="Bluetooth LE - Coprocessor" Cvendor="Maxim" Cversion="0.3.0"&gt;
+
+           &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/wsf/baremetal/sources/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/wsf/common/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/controller/sources/mac/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/controller/sources/mac/ble/lhci/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/wsf/common/include/util/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-host/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/platform/common/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/controller/sources/mac/cfg/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/apps/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/apps/app/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-host/sources/stack/cfg/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/profiles/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/profiles/include/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/include/app/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/services/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-host/sources/stack/hci/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_cmd_ae.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_cmd.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_cmd_phy.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_core_ps.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_evt.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_vs_ae.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/dual_chip/hci_vs.c"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/ble-host/sources/hci/max32665/"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/max32665/hci_drv.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/max32665/hci_tr.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/stack/hci/hci_main.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/platform/max32665/sources/ll_math.c"/&gt;
+
+           &lt;file category="sourceC" name="Libraries/BTLE/platform/max32665/sources/radio_drv.c"/&gt;
+
+           &lt;file category="source" name="Libraries/BTLE/platform/max32665/sources/sdma.inc"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/controller/sources/config/max32665/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/controller/sources/config/"/&gt;
+
+           &lt;file category="include" name="Libraries/BTLE/platform/max32665/"/&gt;
+
+           &lt;file category="library" name="Libraries/BTLE/lib/IAR/cordiolib.a" condition="Startup IAR"/&gt;
+
+           &lt;file category="library" name="Libraries/BTLE/lib/IAR/cordiolibpub.a" condition="Startup IAR"/&gt;
+
+           &lt;file category="library" name="Libraries/BTLE/lib/ARM/cordiolib.lib" condition="Startup ARM"/&gt;
+
+     &lt;/component&gt;         
+
+  &lt;/components&gt;
+
+  &lt;apis/&gt;
+
+&lt;/configuration&gt;
+
+</rte>
+    </cmsisPackSettings>
+</project>

lib/sdk/Applications/EvKitExamples/BLE_dats/Makefile

@@ -29,10 +29,15 @@
 # property whatsoever. Maxim Integrated Products, Inc. retains all
 # ownership rights.
 #
-# $Id: Makefile 38151 2018-09-27 21:32:49Z zach.metzinger $
+# $Id: Makefile 44505 2019-07-09 20:32:03Z nathan.goldstick $
 #
 ################################################################################
 
+# Include project configuration.
+ifneq "$(wildcard config.mk)" ""
+include config.mk
+endif
+
 # This is the name of the build output file
 ifeq "$(PROJECT)" ""
 PROJECT=max32665
@@ -67,10 +72,8 @@ endif
 # This is the path to the CMSIS root directory
 ifeq "$(MAXIM_PATH)" ""
 LIBS_DIR=../../../Libraries
-NDALIBS_DIR=../../../NDALibraries
 else
 LIBS_DIR=/$(subst \,/,$(subst :,,$(MAXIM_PATH))/Firmware/$(TARGET_UC)/Libraries)
-NDALIBS_DIR=/$(subst \,/,$(subst :,,$(MAXIM_PATH))/Firmware/$(TARGET_UC)/NDALibraries)
 endif
 CMSIS_ROOT=$(LIBS_DIR)/CMSIS
 
@@ -78,21 +81,105 @@ CMSIS_ROOT=$(LIBS_DIR)/CMSIS
 SRCS  = main.c
 SRCS += stack_dats.c
 SRCS += dats_main.c
+
 # Where to find source files for this test
 VPATH  = .
 
 # Where to find header files for this test
 IPATH  = .
+
+################################################################################
+# Project build configuration.
+
+#-------------------------------------------------------------------------------
+# Configuration passed via environment vars.
+
+ifdef BTLE_APP_USE_LEGACY_API
+ifeq "$(BTLE_APP_USE_LEGACY_API)" ""
+PROJ_CFLAGS+=-DBTLE_APP_USE_LEGACY_API=TRUE
+else
+ifeq "$(BTLE_APP_USE_LEGACY_API)" "0"
+else
+ifeq "$(BTLE_APP_USE_LEGACY_API)" "FALSE"
+else
+PROJ_CFLAGS+=-DBTLE_APP_USE_LEGACY_API=TRUE
+endif
+endif
+endif
+endif
+
+ifdef CONSOLE_UART
+ifneq "$(CONSOLE_UART)" ""
+PROJ_CFLAGS+=-DCONSOLE_UART=$(CONSOLE_UART)
+endif
+endif
+
+ifdef ENABLE_SDMA
+ifneq "$(ENABLE_SDMA)" ""
+ifeq "$(ENABLE_SDMA)" "0"
+undefine ENABLE_SDMA
+else
+ifeq "$(ENABLE_SDMA)" "FALSE"
+undefine ENABLE_SDMA
+else
+ENABLE_SDMA=1
+endif
+endif
+endif
+endif
+
+ifneq "$(ENABLE_SDMA)" ""
+ifdef BTLE_APP_USE_LEGACY_API
+ifneq "$(BTLE_APP_USE_LEGACY_API)" ""
+ifeq "$(BTLE_APP_USE_LEGACY_API)" "0"
+$(error SDMA currently requires BTLE_APP_USE_LEGACY_API)
+endif
+ifeq "$(BTLE_APP_USE_LEGACY_API)" "FALSE"
+$(error SDMA currently requires BTLE_APP_USE_LEGACY_API)
+endif
+endif
+endif
+endif
+
+#-------------------------------------------------------------------------------
+# Configuration specified here.
+
+#--------------------
+# Stack configuration
+
 # Enable assertion checking for development
-PROJ_CFLAGS+=-DMXC_ASSERT_ENABLE
+PROJ_CFLAGS+=-DMXC_ASSERT_ENABLE=TRUE
+# PROJ_CFLAGS+=-DWSF_TRACE_ENABLED=TRUE
+PROJ_CFLAGS+=-DWSF_ASSERT_ENABLED=TRUE
+# PROJ_CFLAGS+=-DLL_TRACE_ENABLED=TRUE
+# PROJ_CFLAGS+=-DLL_DBG_PIN_ENABLED=TRUE
+PROJ_CFLAGS+=-DWSF_MS_PER_TICK=1
+
+
+#--------------------
+# Application CFLAGS configuration
+
+#--------------------
+# Stack CFLAGS configuration
+
+PROJ_CFLAGS+=-DINIT_BROADCASTER
+# PROJ_CFLAGS+=-DINIT_OBSERVER
+# PROJ_CFLAGS+=-DINIT_CENTRAL
+PROJ_CFLAGS+=-DINIT_PERIPHERAL
+PROJ_CFLAGS+=-DINIT_ENCRYPTED
+
+ENABLE_LL_TESTER?=#1
 
+# Use this variable to override default compilier optimization.
 #MXC_OPTIMIZE_CFLAGS=-Os
+#MXC_OPTIMIZE_CFLAGS=-O0 -fomit-frame-pointer
 
 # Point this variable to a linker file to override the default file
 #LINKERFILE=$(CMSIS_ROOT)/Device/Maxim/$(TARGET_UC)/Source/GCC/$(TARGET_LC).ld
 
 ################################################################################
 # Include external library makefiles here
+DEBUG=1
 
 # Include the BSP
 BOARD_DIR=$(LIBS_DIR)/Boards/$(BOARD)
@@ -103,8 +190,7 @@ PERIPH_DRIVER_DIR=$(LIBS_DIR)/$(TARGET)PeriphDriver
 include ${PERIPH_DRIVER_DIR}/periphdriver.mk
 
 # Include Cordio BTLE Library
-TRACE=1
-CORDIO_DIR=$(NDALIBS_DIR)/BTLE
+CORDIO_DIR=$(LIBS_DIR)/BTLE
 include ${CORDIO_DIR}/btle.mk
 
 # Include MAXUSB library

lib/sdk/Applications/EvKitExamples/BLE_dats/config.mk

+# Specifies whether the legacy 4.2 api should be used.
+# 1 by default.
+# Set to 1 to use 4.2 advertisements.
+# Set to 0 to use 5.0 extended advertisements.
+BTLE_APP_USE_LEGACY_API?=1
+
+# UART used for console output.
+# 1 by default.
+CONSOLE_UART?=1
+
+# Run link layer using SDMA.
+ENABLE_SDMA?=0

lib/sdk/Applications/EvKitExamples/BLE_dats/dats_main.c

@@ -26,6 +26,7 @@
 #include "wsf_buf.h"
 #include "wsf_assert.h"
 #include "hci_api.h"
+#include "hci_vs.h"
 #include "sec_api.h"
 #include "dm_api.h"
 #include "smp_api.h"
@@ -58,11 +59,23 @@ enum
 
 /*! configurable parameters for advertising */
 /* These intervals directly impact energy usage during the non-connected/advertising mode */
+#ifdef BTLE_APP_USE_LEGACY_API
 static const appAdvCfg_t datsAdvCfg =
 {
   { 1000,     0,     0},                  /*! Advertising durations in ms */
   {   96,   200,     0}                   /*! Advertising intervals in 0.625 ms units */
 };
+#else /* BTLE_APP_USE_LEGACY_API */
+static const appExtAdvCfg_t datsExtAdvCfg =
+{
+  {    0,     0,     0}, /*! Advertising durations for extended advertising in ms */
+  {   96,   200,     0}, /*! Advertising intervals for extended advertising in 0.625 ms units (20 ms to 10.24 s). */
+  {    0,     0,     0}, /*! Maximum number of extended advertising events controller will send prior to terminating extended advertising */
+  {    0,     0,     0}, /*! Whether to use legacy advertising PDUs with extended advertising. If set to TRUE then length of advertising data cannot exceed 31 octets. */
+  {    6,     0,     0}  /*! Advertising intervals for periodic advertising in 1.25 ms units (7.5 ms to 81.91875 s). */
+};
+
+#endif /* BTLE_APP_USE_LEGACY_API */
 
 /*! configurable parameters for slave */
 static const appSlaveCfg_t datsSlaveCfg =
@@ -125,6 +138,7 @@ static uint8_t localIrk[] =
   Advertising Data
 **************************************************************************************************/
 
+#ifdef BTLE_APP_USE_LEGACY_API
 /*! advertising data, discoverable mode */
 static const uint8_t datsAdvDataDisc[] =
 {
@@ -149,12 +163,55 @@ static const uint8_t datsScanDataDisc[] =
   'D',
   'a',
   't',
+  's',
+  ' ',
+  'T',
+  'X'
+};
+
+#else /* BTLE_APP_USE_LEGACY_API */
+/*! extended advertising and scan data, discoverable mode */
+static const uint8_t datsExtAdvDataDisc[] =
+{
+  /*! flags */
+  2,                                      /*! length */
+  DM_ADV_TYPE_FLAGS,                      /*! AD type */
+  DM_FLAG_LE_GENERAL_DISC |               /*! flags */
+  DM_FLAG_LE_BREDR_NOT_SUP,
+
+  /*! manufacturer specific data */
+  3,                                      /*! length */
+  DM_ADV_TYPE_MANUFACTURER,               /*! AD type */
+  UINT16_TO_BYTES(HCI_ID_ARM),            /*! company ID */
+
+  /*! device name */
+  8,                                     /*! length */
+  DM_ADV_TYPE_LOCAL_NAME,                 /*! AD type */
+  'D',
   'a',
+  't',
+  's',
   ' ',
   'T',
   'X'
 };
 
+static const uint8_t datsExtScanDataDisc[] =
+{
+  /*! device name */
+  8,                                     /*! length */
+  DM_ADV_TYPE_LOCAL_NAME,                 /*! AD type */
+  'D',
+  'a',
+  't',
+  's',
+  ' ',
+  'T',
+  'X'
+};
+
+#endif /* BTLE_APP_USE_LEGACY_API */
+
 /**************************************************************************************************
   Client Characteristic Configuration Descriptors
 **************************************************************************************************/
@@ -343,13 +400,21 @@ static dmSecKey_t *datsGetPeerKey(dmEvt_t *pMsg)
 /*************************************************************************************************/
 static void datsPrivAddDevToResListInd(dmEvt_t *pMsg)
 {
+#ifndef BTLE_APP_USE_LEGACY_API
+  uint8_t addrZeros[BDA_ADDR_LEN] = { 0 };
+#endif /* BTLE_APP_USE_LEGACY_API */
+
   dmSecKey_t *pPeerKey;
 
   /* if peer IRK present */
   if ((pPeerKey = datsGetPeerKey(pMsg)) != NULL)
   {
     /* set advertising peer address */
+#ifdef BTLE_APP_USE_LEGACY_API
     AppSetAdvPeerAddr(pPeerKey->irk.addrType, pPeerKey->irk.bdAddr);
+#else /* BTLE_APP_USE_LEGACY_API */
+    AppExtSetAdvPeerAddr(DM_ADV_HANDLE_DEFAULT, HCI_ADDR_TYPE_PUBLIC, addrZeros);
+#endif /* BTLE_APP_USE_LEGACY_API */
   }
 }
 
@@ -377,7 +442,11 @@ static void datsPrivRemDevFromResListInd(dmEvt_t *pMsg)
       uint8_t addrZeros[BDA_ADDR_LEN] = { 0 };
 
       /* clear advertising peer address and its type */
+#ifdef BTLE_APP_USE_LEGACY_API
       AppSetAdvPeerAddr(HCI_ADDR_TYPE_PUBLIC, addrZeros);
+#else /* BTLE_APP_USE_LEGACY_API */
+      AppExtSetAdvPeerAddr(DM_ADV_HANDLE_DEFAULT, HCI_ADDR_TYPE_PUBLIC, addrZeros);
+#endif /* BTLE_APP_USE_LEGACY_API */
     }
   }
 }
@@ -409,25 +478,45 @@ void datsDisplayStackVersion(const char *pVersion)
 /*************************************************************************************************/
 static void datsSetup(dmEvt_t *pMsg)
 {
-  /* If this is defined to one, scan responses and connections limited to the EvKit dats peer */
-#if 0
+#ifndef BTLE_APP_USE_LEGACY_API
+  uint8_t advHandle;
+#endif /* BTLE_APP_USE_LEGACY_API */
+
+  /* Scan responses and connections limited to the EvKit dats peer */
   DmDevWhiteListAdd(DM_ADDR_PUBLIC, (bdAddr_t){0x02, 0x01, 0x44, 0x8B, 0x05, 0x00});
   DmDevSetFilterPolicy(DM_FILT_POLICY_MODE_ADV, HCI_FILT_WHITE_LIST);
-#endif
 
   /* set advertising and scan response data for discoverable mode */
+#ifdef BTLE_APP_USE_LEGACY_API
   AppAdvSetData(APP_ADV_DATA_DISCOVERABLE, sizeof(datsAdvDataDisc), (uint8_t *) datsAdvDataDisc);
   AppAdvSetData(APP_SCAN_DATA_DISCOVERABLE, sizeof(datsScanDataDisc), (uint8_t *) datsScanDataDisc);
+#else /* BTLE_APP_USE_LEGACY_API */
+  AppExtAdvSetData(DM_ADV_HANDLE_DEFAULT, APP_ADV_DATA_DISCOVERABLE, sizeof(datsExtAdvDataDisc), (uint8_t *) datsExtAdvDataDisc, HCI_EXT_ADV_DATA_LEN);
+  AppExtAdvSetData(DM_ADV_HANDLE_DEFAULT, APP_SCAN_DATA_DISCOVERABLE, sizeof(datsExtScanDataDisc), (uint8_t *) datsExtScanDataDisc, HCI_EXT_ADV_DATA_LEN);
+#endif /* BTLE_APP_USE_LEGACY_API */
+ 
 
   /* set advertising and scan response data for connectable mode */
+#ifdef BTLE_APP_USE_LEGACY_API
   AppAdvSetData(APP_ADV_DATA_CONNECTABLE, sizeof(datsAdvDataDisc), (uint8_t *) datsAdvDataDisc);
   AppAdvSetData(APP_SCAN_DATA_CONNECTABLE, sizeof(datsScanDataDisc), (uint8_t *) datsScanDataDisc);
+#else /* BTLE_APP_USE_LEGACY_API */
+  AppExtAdvSetData(DM_ADV_HANDLE_DEFAULT, APP_ADV_DATA_CONNECTABLE, sizeof(datsExtAdvDataDisc), (uint8_t *) datsExtAdvDataDisc, HCI_EXT_ADV_DATA_LEN);
+  AppExtAdvSetData(DM_ADV_HANDLE_DEFAULT, APP_SCAN_DATA_CONNECTABLE, sizeof(datsExtScanDataDisc), (uint8_t *) datsExtScanDataDisc, HCI_EXT_ADV_DATA_LEN);
+#endif /* BTLE_APP_USE_LEGACY_API */
 
-  /* 0x3 : 1M and 2M PHYs */
-  DmSetDefaultPhy(0, 0x3, 0x3);
+  DmSetDefaultPhy(0, HCI_PHY_LE_1M_BIT | HCI_PHY_LE_2M_BIT, HCI_PHY_LE_1M_BIT | HCI_PHY_LE_2M_BIT);
 
   /* start advertising; automatically set connectable/discoverable mode and bondable mode */
+#ifndef BTLE_APP_USE_LEGACY_API
+  advHandle = DM_ADV_HANDLE_DEFAULT;
+#endif /* BTLE_APP_USE_LEGACY_API */
+
+#ifdef BTLE_APP_USE_LEGACY_API
   AppAdvStart(APP_MODE_AUTO_INIT);
+#else /* BTLE_APP_USE_LEGACY_API */
+  AppExtAdvStart(1, &advHandle, APP_MODE_AUTO_INIT);
+#endif /* BTLE_APP_USE_LEGACY_API */
 }
 
 /*************************************************************************************************/
@@ -455,10 +544,22 @@ static void datsProcMsg(dmEvt_t *pMsg)
       uiEvent = APP_UI_ADV_START;
       break;
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+    case DM_ADV_SET_START_IND:
+      uiEvent = APP_UI_ADV_SET_START_IND;
+      break;
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
     case DM_ADV_STOP_IND:
       uiEvent = APP_UI_ADV_STOP;
       break;
 
+#ifndef BTLE_APP_IGNORE_EXT_EVENTS
+     case DM_ADV_SET_STOP_IND:
+      uiEvent = APP_UI_ADV_SET_STOP_IND;
+      break;
+#endif /* BTLE_APP_IGNORE_EXT_EVENTS */
+
     case DM_CONN_OPEN_IND:
       uiEvent = APP_UI_CONN_OPEN;
       break;
@@ -534,6 +635,9 @@ static void datsProcMsg(dmEvt_t *pMsg)
     case DM_ADV_NEW_ADDR_IND:
       break;
 
+    case DM_VENDOR_SPEC_IND:
+      break;
+
     default:
       break;
   }
@@ -562,7 +666,11 @@ void DatsHandlerInit(wsfHandlerId_t handlerId)
 
   /* Set configuration pointers */
   pAppSlaveCfg = (appSlaveCfg_t *) &datsSlaveCfg;
+#ifdef BTLE_APP_USE_LEGACY_API
   pAppAdvCfg = (appAdvCfg_t *) &datsAdvCfg;
+#else /* BTLE_APP_USE_LEGACY_API */
+  pAppExtAdvCfg = (appExtAdvCfg_t *) &datsExtAdvCfg;
+#endif /* BTLE_APP_USE_LEGACY_API */
   pAppSecCfg = (appSecCfg_t *) &datsSecCfg;
   pAppUpdateCfg = (appUpdateCfg_t *) &datsUpdateCfg;
   pSmpCfg = (smpCfg_t *) &datsSmpCfg;

lib/sdk/Applications/EvKitExamples/BLE_dats/main.c

@@ -29,34 +29,32 @@
  * property whatsoever. Maxim Integrated Products, Inc. retains all
  * ownership rights.
  *
- * $Date: 2019-02-11 23:36:35 +0000 (Mon, 11 Feb 2019) $
- * $Revision: 40967 $
+ * $Date: 2019-07-11 13:33:24 -0500 (Thu, 11 Jul 2019) $
+ * $Revision: 44549 $
  *
  ******************************************************************************/
 
 #include <stdio.h>
 #include <string.h>
+#include "mxc_config.h"
 #include "wsf_types.h"
 #include "wsf_os.h"
 #include "wsf_buf.h"
 #include "wsf_timer.h"
 #include "wsf_trace.h"
 #include "app_ui.h"
-#include "ll_api.h"
-#include "sch_api.h"
 #include "dats/dats_api.h"
-#include "mxc_config.h"
-#include "gcr_regs.h"
-#include "mcr_regs.h"
 #include "app_ui.h"
+#include "hci_vs.h"
 #include "hci_core.h"
 
 /**************************************************************************************************
   Macros
 **************************************************************************************************/
 
-/* Number of WSF buffer pools */
+/* Size of buffer for stdio functions */
 #define WSF_BUF_POOLS       6
+#define WSF_BUF_SIZE        0x1048
 
 /* Size of buffer for stdio functions */
 #define PRINTF_BUF_SIZE     128
@@ -65,12 +63,13 @@
   Local Variables
 **************************************************************************************************/
 
+uint32_t SystemHeapSize=WSF_BUF_SIZE;
+uint32_t SystemHeap[WSF_BUF_SIZE/4];
+uint32_t SystemHeapStart;
+
 /*! Buffer for stdio functions */
 char printf_buffer[PRINTF_BUF_SIZE];
 
-/*! Free memory for pool buffers (use word elements for word alignment). */
-static uint32_t mainBufMem[3584/sizeof(uint32_t)+96];
-
 /*! Default pool descriptor. */
 static wsfBufPoolDesc_t mainPoolDesc[WSF_BUF_POOLS] =
 {
@@ -79,7 +78,7 @@ static wsfBufPoolDesc_t mainPoolDesc[WSF_BUF_POOLS] =
   {  64,  4 },
   { 128,  4 },
   { 256,  4 },
-  { 384,  4 }
+  { 512,  4 }
 };
 
 /**************************************************************************************************
@@ -89,6 +88,12 @@ static wsfBufPoolDesc_t mainPoolDesc[WSF_BUF_POOLS] =
 /*! \brief  Stack initialization for app. */
 extern void StackInitDats(void);
 
+/*************************************************************************************************/
+void PalSysAssertTrap(void)
+{
+    while(1) {}
+}
+
 /*************************************************************************************************/
 void SysTick_Handler(void)
 {
@@ -96,15 +101,17 @@ void SysTick_Handler(void)
 }
 
 /*************************************************************************************************/
-static void myTrace(const char *pStr, va_list args)
+static bool_t myTrace(const uint8_t *pBuf, uint32_t len)
 {
     extern uint8_t wsfCsNesting;
 
     if (wsfCsNesting == 0)
     {
-        vprintf(pStr, args);
-        printf("\r\n");
+        fwrite(pBuf, len, 1, stdout);
+        return TRUE;
     }
+
+    return FALSE;
 }
 
 /*************************************************************************************************/
@@ -116,47 +123,23 @@ static void myTrace(const char *pStr, va_list args)
 /*************************************************************************************************/
 static void WsfInit(void)
 {
-    WsfTimerInit();
-    WsfBufInit(sizeof(mainBufMem), (uint8_t*)mainBufMem, WSF_BUF_POOLS, mainPoolDesc);
-    WsfTraceRegister(myTrace);
-}
-
-/*************************************************************************************************/
-/*!
- *  \brief  Initialize platform.
- *
- *  \param  msPerTick   Milliseconds per timer tick.
- *
- *  \return None.
- */
-/*************************************************************************************************/
-void PlatformInit(void)
-{
-    /* Change the pullup on the RST pin to 25K */
-    MXC_MCR->ctrl = 0x202;
-
-    /* Set VREGO_D to 1.3V */
-    *((volatile uint32_t*)0x40004410) = 0x50;
-
-    /* Set TX LDO to 1.1V and enable LDO. Set RX LDO to 0.9V and enable LDO */
-    MXC_GCR->btleldocn = 0xD9; // TX 1.1V RX 0.9V
-
-    /* Power up the 32MHz XO */
-    MXC_GCR->clkcn |= MXC_F_GCR_CLKCN_X32M_EN;
-
-    /* Enable peripheral clocks */
-    MXC_GCR->perckcn0 &= ~(MXC_F_GCR_PERCKCN0_GPIO0D | MXC_F_GCR_PERCKCN0_GPIO1D);  // Clear GPIO0 and GPIO1 Disable
-    MXC_GCR->perckcn1 &= ~(MXC_F_GCR_PERCKCN1_BTLED | MXC_F_GCR_PERCKCN1_TRNGD );  // Clear BTLE and ICACHE0 disable
-
-    /* setup the systick */
+    uint32_t bytesUsed;
+    /* setup the systick for 1MS timer*/
     SysTick->LOAD = (SystemCoreClock / 1000) * WSF_MS_PER_TICK;
     SysTick->VAL = 0;
     SysTick->CTRL |= (SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_TICKINT_Msk);
 
-#ifndef __IAR_SYSTEMS_ICC__
-    /* Added to prevent printf() and friends from using malloc() */
-    setvbuf(stdout, printf_buffer, _IOLBF, PRINTF_BUF_SIZE);
-#endif
+    WsfTimerInit();
+
+    SystemHeapStart = (uint32_t)&SystemHeap;
+    memset(SystemHeap, 0, sizeof(SystemHeap));
+    printf("SystemHeapStart = 0x%x\n", SystemHeapStart);
+    printf("SystemHeapSize = 0x%x\n", SystemHeapSize);
+    bytesUsed = WsfBufInit(WSF_BUF_POOLS, mainPoolDesc);
+    printf("bytesUsed = 0x%x\n", bytesUsed);
+    
+    WsfTraceRegisterHandler(myTrace);
+    WsfTraceEnable(TRUE);
 }
 
 /*
@@ -172,37 +155,13 @@ void SetAddress(uint8_t event)
     switch (event) {
     case APP_UI_RESET_CMPL:
         printf("Setting address -- MAC %02X:%02X:%02X:%02X:%02X:%02X\n", bdAddr[5], bdAddr[4], bdAddr[3], bdAddr[2], bdAddr[1], bdAddr[0]);
-	    LlSetBdAddr((uint8_t*)&bdAddr);
-	    LlGetBdAddr(hciCoreCb.bdAddr);
+        HciVsSetBdAddr(bdAddr);
         break;
     default:
         break;
     }
 }
 
-/*************************************************************************************************/
-/*!
- *  \brief  Initialize MAC layer.
- *
- *  \param  None.
- *
- *  \return None.
- */
-/*************************************************************************************************/
-void MacInit(void)
-{
-    wsfHandlerId_t handlerId;
-
-    /* Initialize link layer. */
-    BbInit();
-    handlerId = WsfOsSetNextHandler(SchHandler);
-    SchInit(handlerId);
-    LlAdvSlaveInit();
-    LlConnSlaveInit();
-    handlerId = WsfOsSetNextHandler(LlHandler);
-    LlHandlerInit(handlerId);
-}
-
 /*************************************************************************************************/
 /*!
  *  \fn     main
@@ -216,11 +175,15 @@ void MacInit(void)
 /*************************************************************************************************/
 int main(void)
 {
+
+#ifndef __IAR_SYSTEMS_ICC__
+    setvbuf(stdout, printf_buffer, _IOLBF, PRINTF_BUF_SIZE);
+#endif
+
     printf("\n\n***** MAX32665 BLE Data Server *****\n");
 
-    PlatformInit();
+    /* Initialize Radio */
     WsfInit();
-    MacInit();
     StackInitDats();
     DatsStart();
 

lib/sdk/Applications/EvKitExamples/BLE_dats/stack_dats.c

@@ -17,13 +17,13 @@
  */
 /*************************************************************************************************/
 
+#include <stdio.h>
+#include <string.h>
 #include "wsf_types.h"
 #include "wsf_os.h"
 #include "util/bstream.h"
-
 #include "dats/dats_api.h"
 #include "wdxs/wdxs_api.h"
-
 #include "hci_handler.h"
 #include "dm_handler.h"
 #include "l2c_handler.h"
@@ -36,6 +36,56 @@
 #include "svc_dis.h"
 #include "svc_core.h"
 #include "sec_api.h"
+#include "ll_init_api.h"
+
+#define LL_IMPL_REV             0x2303
+
+#define LL_MEMORY_FOOTPRINT     0xc152
+
+uint8_t LlMem[LL_MEMORY_FOOTPRINT];
+
+const LlRtCfg_t _ll_cfg = {
+    /* Device */
+    /*compId*/                  LL_COMP_ID_ARM,
+    /*implRev*/                 LL_IMPL_REV,
+    /*btVer*/                   LL_VER_BT_CORE_SPEC_5_0,
+    /*_align32 */               0, // padding for alignment
+
+    /* Advertiser */
+    /*maxAdvSets*/              4, // 4 Extended Advertising Sets
+    /*maxAdvReports*/           8,
+    /*maxExtAdvDataLen*/        LL_MAX_ADV_DATA_LEN,
+    /*defExtAdvDataFrag*/       64,
+    /*auxDelayUsec*/            0,
+
+    /* Scanner */
+    /*maxScanReqRcvdEvt*/       4,
+    /*maxExtScanDataLen*/       LL_MAX_ADV_DATA_LEN,
+
+    /* Connection */
+    /*maxConn*/                 2,
+    /*numTxBufs*/               16,
+    /*numRxBufs*/               16,
+    /*maxAclLen*/               512,
+    /*defTxPwrLvl*/             0,
+    /*ceJitterUsec*/            0,
+
+    /* DTM */
+    /*dtmRxSyncMs*/             10000,
+
+    /* PHY */
+    /*phy2mSup*/                TRUE,
+    /*phyCodedSup*/             FALSE,
+    /*stableModIdxTxSup*/       FALSE,
+    /*stableModIdxRxSup*/       FALSE
+};
+
+const BbRtCfg_t _bb_cfg = {
+    /*clkPpm*/                  20,
+    /*rfSetupDelayUsec*/        BB_RF_SETUP_DELAY_US,
+    /*maxScanPeriodMsec*/       BB_MAX_SCAN_PERIOD_MS,
+    /*schSetupDelayUsec*/       BB_SCH_SETUP_DELAY_US
+};
 
 /*************************************************************************************************/
 /*!
@@ -47,27 +97,49 @@
 void StackInitDats(void)
 {
   wsfHandlerId_t handlerId;
-  uint8_t features[sizeof(uint64_t)];
-  uint8_t mask[sizeof(uint64_t)];
 
-  SecInit();
-  SecAesInit();
-  SecCmacInit();
-  SecEccInit();
+#ifndef ENABLE_SDMA
+  uint32_t memUsed;
+
+  /* Initialize link layer. */
+  LlInitRtCfg_t ll_init_cfg =
+  {
+      .pBbRtCfg     = &_bb_cfg,
+      .wlSizeCfg    = 4,
+      .rlSizeCfg    = 4,
+      .plSizeCfg    = 4,
+      .pLlRtCfg     = &_ll_cfg,
+      .pFreeMem     = LlMem,
+      .freeMemAvail = LL_MEMORY_FOOTPRINT
+  };
 
-  // Only use legacy API.
-  Uint64ToBstream(features, 0);
-  Uint64ToBstream(mask, HCI_LE_SUP_FEAT_LE_EXT_ADV);
-  HciVsSetFeatures(features, mask);
+  memUsed = LlInitControllerExtInit(&ll_init_cfg);
+  if(memUsed != LL_MEMORY_FOOTPRINT)
+  {
+      printf("mem_used: 0x%x LL_MEMORY_FOOTPRINT: 0x%x\n", memUsed, 
+          LL_MEMORY_FOOTPRINT);
+  }
+#endif
 
   handlerId = WsfOsSetNextHandler(HciHandler);
   HciHandlerInit(handlerId);
 
+  SecInit();
+  SecAesInit();
+  SecCmacInit();
+  SecEccInit();
+
   handlerId = WsfOsSetNextHandler(DmHandler);
   DmDevVsInit(0);
+#ifdef BTLE_APP_USE_LEGACY_API
   DmAdvInit();
   DmConnInit();
   DmConnSlaveInit();
+#else /* BTLE_APP_USE_LEGACY_API */
+  DmExtAdvInit();
+  DmConnInit();
+  DmExtConnSlaveInit();
+#endif /* BTLE_APP_USE_LEGACY_API */
   DmSecInit();
   DmSecLescInit();
   DmPrivInit();
@@ -99,4 +171,5 @@ void StackInitDats(void)
   handlerId = WsfOsSetNextHandler(WdxsHandler);
   WdxsHandlerInit(handlerId);
 #endif
+  
 }

lib/sdk/Applications/EvKitExamples/BLE_fit/ARM/Abstract.txt

+BLE fit example

lib/sdk/Applications/EvKitExamples/BLE_fit/ARM/BTLE_fit.uvoptx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
+
+  <SchemaVersion>1.0</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Extensions>
+    <cExt>*.c</cExt>
+    <aExt>*.s*; *.src; *.a*</aExt>
+    <oExt>*.obj; *.o</oExt>
+    <lExt>*.lib</lExt>
+    <tExt>*.txt; *.h; *.inc</tExt>
+    <pExt>*.plm</pExt>
+    <CppX>*.cpp</CppX>
+    <nMigrate>0</nMigrate>
+  </Extensions>
+
+  <DaveTm>
+    <dwLowDateTime>0</dwLowDateTime>
+    <dwHighDateTime>0</dwHighDateTime>
+  </DaveTm>
+
+  <Target>
+    <TargetName>Flash Debug</TargetName>
+    <ToolsetNumber>0x4</ToolsetNumber>
+    <ToolsetName>ARM-ADS</ToolsetName>
+    <TargetOption>
+      <CLKADS>96000000</CLKADS>
+      <OPTTT>
+        <gFlags>1</gFlags>
+        <BeepAtEnd>1</BeepAtEnd>
+        <RunSim>0</RunSim>
+        <RunTarget>1</RunTarget>
+        <RunAbUc>0</RunAbUc>
+      </OPTTT>
+      <OPTHX>
+        <HexSelection>1</HexSelection>
+        <FlashByte>65535</FlashByte>
+        <HexRangeLowAddress>0</HexRangeLowAddress>
+        <HexRangeHighAddress>0</HexRangeHighAddress>
+        <HexOffset>0</HexOffset>
+      </OPTHX>
+      <OPTLEX>
+        <PageWidth>79</PageWidth>
+        <PageLength>66</PageLength>
+        <TabStop>8</TabStop>
+        <ListingPath>.\Listings\</ListingPath>
+      </OPTLEX>
+      <ListingPage>
+        <CreateCListing>1</CreateCListing>
+        <CreateAListing>1</CreateAListing>
+        <CreateLListing>1</CreateLListing>
+        <CreateIListing>0</CreateIListing>
+        <AsmCond>1</AsmCond>
+        <AsmSymb>1</AsmSymb>
+        <AsmXref>0</AsmXref>
+        <CCond>1</CCond>
+        <CCode>0</CCode>
+        <CListInc>0</CListInc>
+        <CSymb>0</CSymb>
+        <LinkerCodeListing>0</LinkerCodeListing>
+      </ListingPage>
+      <OPTXL>
+        <LMap>1</LMap>
+        <LComments>1</LComments>
+        <LGenerateSymbols>1</LGenerateSymbols>
+        <LLibSym>1</LLibSym>
+        <LLines>1</LLines>
+        <LLocSym>1</LLocSym>
+        <LPubSym>1</LPubSym>
+        <LXref>0</LXref>
+        <LExpSel>0</LExpSel>
+      </OPTXL>
+      <OPTFL>
+        <tvExp>1</tvExp>
+        <tvExpOptDlg>0</tvExpOptDlg>
+        <IsCurrentTarget>1</IsCurrentTarget>
+      </OPTFL>
+      <CpuCode>255</CpuCode>
+      <DebugOpt>
+        <uSim>0</uSim>
+        <uTrg>1</uTrg>
+        <sLdApp>1</sLdApp>
+        <sGomain>1</sGomain>
+        <sRbreak>1</sRbreak>
+        <sRwatch>1</sRwatch>
+        <sRmem>1</sRmem>
+        <sRfunc>1</sRfunc>
+        <sRbox>1</sRbox>
+        <tLdApp>1</tLdApp>
+        <tGomain>1</tGomain>
+        <tRbreak>1</tRbreak>
+        <tRwatch>1</tRwatch>
+        <tRmem>1</tRmem>
+        <tRfunc>0</tRfunc>
+        <tRbox>1</tRbox>
+        <tRtrace>1</tRtrace>
+        <sRSysVw>1</sRSysVw>
+        <tRSysVw>1</tRSysVw>
+        <sRunDeb>0</sRunDeb>
+        <sLrtime>0</sLrtime>
+        <bEvRecOn>1</bEvRecOn>
+        <bSchkAxf>0</bSchkAxf>
+        <bTchkAxf>0</bTchkAxf>
+        <nTsel>2</nTsel>
+        <sDll></sDll>
+        <sDllPa></sDllPa>
+        <sDlgDll></sDlgDll>
+        <sDlgPa></sDlgPa>
+        <sIfile></sIfile>
+        <tDll></tDll>
+        <tDllPa></tDllPa>
+        <tDlgDll></tDlgDll>
+        <tDlgPa></tDlgPa>
+        <tIfile></tIfile>
+        <pMon>BIN\CMSIS_AGDI.dll</pMon>
+      </DebugOpt>
+      <TargetDriverDllRegistry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>CMSIS_AGDI</Key>
+          <Name>-X"CMSIS-DAP" -UMXIM00001c2400b00000000000000000 -O238 -S10 -C0 -P00 -N00("ARM CoreSight SW-DP") -D00(2BA01477) -L00(0) -TO18 -TC10000000 -TP20 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO23 -FD20000000 -FC1000 -FN1 -FF0MAX32665.FLM -FS010000000 -FL0100000 -FP0($$Device:MAX32665$Flash\MAX32665.FLM)</Name>
+        </SetRegEntry>
+        <SetRegEntry>
+          <Number>0</Number>
+          <Key>UL2CM3</Key>
+          <Name>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000)</Name>
+        </SetRegEntry>
+      </TargetDriverDllRegistry>
+      <Breakpoint/>
+      <Tracepoint>
+        <THDelay>0</THDelay>
+      </Tracepoint>
+      <DebugFlag>
+        <trace>0</trace>
+        <periodic>1</periodic>
+        <aLwin>0</aLwin>
+        <aCover>0</aCover>
+        <aSer1>0</aSer1>
+        <aSer2>0</aSer2>
+        <aPa>0</aPa>
+        <viewmode>0</viewmode>
+        <vrSel>0</vrSel>
+        <aSym>0</aSym>
+        <aTbox>0</aTbox>
+        <AscS1>0</AscS1>
+        <AscS2>0</AscS2>
+        <AscS3>0</AscS3>
+        <aSer3>0</aSer3>
+        <eProf>0</eProf>
+        <aLa>0</aLa>
+        <aPa1>0</aPa1>
+        <AscS4>0</AscS4>
+        <aSer4>0</aSer4>
+        <StkLoc>0</StkLoc>
+        <TrcWin>0</TrcWin>
+        <newCpu>0</newCpu>
+        <uProt>0</uProt>
+      </DebugFlag>
+      <LintExecutable></LintExecutable>
+      <LintConfigFile></LintConfigFile>
+      <bLintAuto>0</bLintAuto>
+      <bAutoGenD>0</bAutoGenD>
+      <LntExFlags>0</LntExFlags>
+      <pMisraName></pMisraName>
+      <pszMrule></pszMrule>
+      <pSingCmds></pSingCmds>
+      <pMultCmds></pMultCmds>
+      <pMisraNamep></pMisraNamep>
+      <pszMrulep></pszMrulep>
+      <pSingCmdsp></pSingCmdsp>
+      <pMultCmdsp></pMultCmdsp>
+      <DebugDescription>
+        <Enable>1</Enable>
+        <EnableFlashSeq>1</EnableFlashSeq>
+        <EnableLog>1</EnableLog>
+        <Protocol>2</Protocol>
+        <DbgClock>2000000</DbgClock>
+      </DebugDescription>
+    </TargetOption>
+  </Target>
+
+  <Group>
+    <GroupName>Source</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>0</RteFlg>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>1</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\main.c</PathWithFileName>
+      <FilenameWithoutPath>main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>2</FileNumber>
+      <FileType>5</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>.\Abstract.txt</PathWithFileName>
+      <FilenameWithoutPath>Abstract.txt</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>3</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\fit_main.c</PathWithFileName>
+      <FilenameWithoutPath>fit_main.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>4</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\stack_fit.c</PathWithFileName>
+      <FilenameWithoutPath>stack_fit.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+    <File>
+      <GroupNumber>1</GroupNumber>
+      <FileNumber>5</FileNumber>
+      <FileType>1</FileType>
+      <tvExp>0</tvExp>
+      <tvExpOptDlg>0</tvExpOptDlg>
+      <bDave2>0</bDave2>
+      <PathWithFileName>..\svc_dis.c</PathWithFileName>
+      <FilenameWithoutPath>svc_dis.c</FilenameWithoutPath>
+      <RteFlg>0</RteFlg>
+      <bShared>0</bShared>
+    </File>
+  </Group>
+
+  <Group>
+    <GroupName>::BSP</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Bluetooth</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::CMSIS</GroupName>
+    <tvExp>0</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+  <Group>
+    <GroupName>::Device</GroupName>
+    <tvExp>1</tvExp>
+    <tvExpOptDlg>0</tvExpOptDlg>
+    <cbSel>0</cbSel>
+    <RteFlg>1</RteFlg>
+  </Group>
+
+</ProjectOpt>

lib/sdk/Applications/EvKitExamples/BLE_fit/ARM/BTLE_fit.uvprojx

+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Flash Debug</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <pCCUsed>5060750::V5.06 update 6 (build 750)::ARMCC</pCCUsed>
+      <uAC6>0</uAC6>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>MAX32665:Cortex-M4</Device>
+          <Vendor>Maxim</Vendor>
+          <PackID>Maxim.MAX32665.0.2.0-5</PackID>
+          <PackURL>http://www.mxim.net/microcontroller/pack/</PackURL>
+          <Cpu>IRAM(0x20000000,0x00080000) IROM(0x10000000,0x00100000) CPUTYPE("Cortex-M4") FPU2 CLOCK(96000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000)</FlashDriverDll>
+          <DeviceId>0</DeviceId>
+          <RegisterFile>$$Device:MAX32665$Libraries\Device\Maxim\MAX32665\Include\max32665.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:MAX32665$SVD\MAX32665\max32665.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\Objects\</OutputDirectory>
+          <OutputName>BLE_fit</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>0</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\Listings\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> </SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments></TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4096</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>BIN\UL2CM3.DLL</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <RvdsMve>0</RvdsMve>
+            <hadIRAM2>0</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>1</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <nSecure>0</nSecure>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>0</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>0</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x80000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x100000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x100000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0x80000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>1</Optim>
+            <oTime>0</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>1</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>1</uC99>
+            <uGnu>0</uGnu>
+            <useXO>0</useXO>
+            <v6Lang>1</v6Lang>
+            <v6LangP>1</v6LangP>
+            <vShortEn>1</vShortEn>
+            <vShortWch>1</vShortWch>
+            <v6Lto>0</v6Lto>
+            <v6WtE>0</v6WtE>
+            <v6Rtti>0</v6Rtti>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <uClangAs>0</uClangAs>
+            <VariousControls>
+              <MiscControls></MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath></IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x10000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile>.\Objects\BLE_fit.sct</ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>Source</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\main.c</FilePath>
+            </File>
+            <File>
+              <FileName>Abstract.txt</FileName>
+              <FileType>5</FileType>
+              <FilePath>.\Abstract.txt</FilePath>
+            </File>
+            <File>
+              <FileName>fit_main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\fit_main.c</FilePath>
+            </File>
+            <File>
+              <FileName>stack_fit.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\stack_fit.c</FilePath>
+            </File>
+            <File>
+              <FileName>svc_dis.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\svc_dis.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>::BSP</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::Bluetooth</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::CMSIS</GroupName>
+        </Group>
+        <Group>
+          <GroupName>::Device</GroupName>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+  <RTE>
+    <apis/>
+    <components>
+      <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.2" condition="ARMv6_7_8-M Device">
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="5.4.0"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="MAX32665 BSP" Cclass="BSP" Cgroup="EvKit V1" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 BSP DEP">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="GPIO" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 CMSIS GPIO">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 Family">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="Timers" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 CMSIS TIMER">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="UART" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 CMSIS UART">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim API" Cclass="Device" Cgroup="XiP Flash" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 CMSIS SPI XIP FLASH">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+      <component Cbundle="Maxim BTLE" Cclass="Bluetooth" Cgroup="Bluetooth LE" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 Family">
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </component>
+    </components>
+    <files>
+      <file attr="config" category="header" name="Libraries\Device\Maxim\MAX32665\Include\max32665.h" version="0.2.0-5">
+        <instance index="0">RTE\Device\MAX32665\max32665.h</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+      <file attr="config" category="sourceAsm" condition="Startup ARM" name="Libraries\Device\Maxim\MAX32665\Source\ARM\startup_max32665.s" version="0.2.0-5">
+        <instance index="0">RTE\Device\MAX32665\startup_max32665.s</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+      <file attr="config" category="sourceC" condition="Startup ARM" name="Libraries\Device\Maxim\MAX32665\Source\ARM\sub_main.c" version="0.2.0-5d">
+        <instance index="0" removed="1">RTE\Device\MAX32665\sub_main.c</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.2.0-5d" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5d"/>
+        <targetInfos/>
+      </file>
+      <file attr="config" category="sourceC" name="Libraries\Device\Maxim\MAX32665\Source\system_max32665.c" version="0.2.0-5">
+        <instance index="0">RTE\Device\MAX32665\system_max32665.c</instance>
+        <component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.2.0-5" condition="MAX32665 Family"/>
+        <package license="License/END_USER_LICENSE_AGREEMENT.rtf" name="MAX32665" schemaVersion="1.3" supportContact="support@maximintegrated.com" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.2.0-5"/>
+        <targetInfos>
+          <targetInfo name="Flash Debug"/>
+        </targetInfos>
+      </file>
+    </files>
+  </RTE>
+
+</Project>

lib/sdk/Applications/EvKitExamples/BLE_fit/IAR/BLE_fit.ewd

+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>Debug</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\debugger\MAX32665.ddf</state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>CMSISDAP_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\flashloader\FlashMAX32665.board</state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>5</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>C-SPY</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>30</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCVariant</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>MemOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MemFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>RunToEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RunToName</name>
+                    <state>main</state>
+                </option>
+                <option>
+                    <name>CExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDDFArgumentProducer</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadSuppressDownload</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDownloadVerifyAll</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProductVersion</name>
+                    <state>8.30.1.17146</state>
+                </option>
+                <option>
+                    <name>OCDynDriverList</name>
+                    <state>ARMSIM_ID</state>
+                </option>
+                <option>
+                    <name>OCLastSavedByProductVersion</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>UseFlashLoader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CLowLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacFile2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CDevice</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>FlashLoadersV3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesSuppressCheck3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesPath3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OverrideDefFlashBoard</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesOffset1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesOffset3</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCImagesUse1</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCImagesUse3</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDeviceConfigMacroFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCDebuggerExtraOption</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAllMTBOptions</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCores</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreMaster</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticorePort</name>
+                    <state>53461</state>
+                </option>
+                <option>
+                    <name>OCMulticoreWorkspace</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveProject</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCMulticoreSlaveConfiguration</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCDownloadExtraImage</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCAttachSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MassEraseBeforeFlashing</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCMulticoreNrOfCoresSlave</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ARMSIM_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCSimDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCSimEnablePSP</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspOverrideConfig</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCSimPspConfigFile</name>
+                    <state></state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CADI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCadiMemory</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Fast Model</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCADILogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCADILogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CMSISDAP_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>4</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CMSISDAPResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>CMSISDAPHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>CMSISDAPDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CMSISDAPProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CMSISDAPSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCMSISDAPUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>GDBSERVER_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJTagBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJTagUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IJET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OCIarProbeScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetResetList</name>
+                    <version>1</version>
+                    <state>10</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDuration</name>
+                    <state>300</state>
+                </option>
+                <option>
+                    <name>IjetHWResetDelay</name>
+                    <state>200</state>
+                </option>
+                <option>
+                    <name>IjetPowerFromProbe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPowerRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTargetEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetJtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetProtocolRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSwoPin</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetSwoPrescalerList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetRestoreBreakpointsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetUpdateBreakpointsEdit</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>RDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchUndef</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchData</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchPrefetch</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>RDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CatchMMERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchNOCPERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchCHKERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSTATERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchBUSERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchINTERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchSFERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchHARDERR</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeCfgOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCProbeConfig</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IjetProbeConfigRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetMultiCPUNumber</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetSelectedCPUBehaviour</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ICpuName</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OCJetEmuParams</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetPreferETB</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IjetTraceSettingsList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IjetTraceSizeList</name>
+                    <version>0</version>
+                    <state>4</state>
+                </option>
+                <option>
+                    <name>FlashBoardPathSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCIjetUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>JLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>16</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>JLinkSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCJLinkHWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>JLinkInitialSpeed</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCDoJlinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCScanChainNonARMDevices</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkMultiTarget</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkIRLength</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkCommRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTCPIP</name>
+                    <state>aaa.bbb.ccc.ddd</state>
+                </option>
+                <option>
+                    <name>CCJLinkSpeedRadioV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCUSBDevice</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRDICatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCRDICatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkBreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkResetList</name>
+                    <version>6</version>
+                    <state>5</state>
+                </option>
+                <option>
+                    <name>CCJLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkScriptFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCTcpIpAlt</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCJLinkTcpIpSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkTraceSourceDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCJLinkDeviceName</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>LMIFTDI_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>2</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>LmiftdiSpeed</name>
+                    <state>500</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiftdiLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCLmiFtdiInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>NULINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>PEMICRO_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>3</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCJPEMicroShowSettings</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>STLINK_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>5</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkResetList</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSwoClockEdit</name>
+                    <state>2000</state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkCatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkUsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkJtagSpeedList</name>
+                    <version>1</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkDAPNumber</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCSTLinkDebugAccessPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSTLinkUseServerSelect</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>THIRDPARTY_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CThirdPartyDriverDll</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CThirdPartyLogFileEditB</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>TIFET_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetInterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVccTypeDefault</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>CCMSPFetVCCDefault</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetTargetSettlingtime</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioJtagSpeedType</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCMSPFetConnection</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetUsbComPort</name>
+                    <state>Automatic</state>
+                </option>
+                <option>
+                    <name>CCMSPFetAllowAccessToBSL</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetDoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCMSPFetLogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCMSPFetRadioEraseFlash</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>XDS100_ID</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>8</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OCDriverInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TIPackageOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TIPackage</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>BoardFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoLogfile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>LogFile</name>
+                    <state>$PROJ_DIR$\cspycomm.log</state>
+                </option>
+                <option>
+                    <name>CCXds100BreakpointRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100DoUpdateBreakpoints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UpdateBreakpoints</name>
+                    <state>_call_main</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchReset</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchUndef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSWI</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchData</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchPrefetch</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchIRQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchFIQ</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCORERESET</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchMMERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchNOCPERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchCHRERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSTATERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchBUSERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchINTERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchSFERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchHARDERR</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CatchDummy</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100CpuClockEdit</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockAuto</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SwoClockEdit</name>
+                    <state>1000</state>
+                </option>
+                <option>
+                    <name>CCXds100HWResetDelay</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ResetList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNo</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCXds100UsbSerialNoSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100JtagSpeedList</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceRadio</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100InterfaceCmdLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100ProbeList</name>
+                    <version>0</version>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPortRadio</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXds100SWOPort</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVccEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCXDSTargetVoltage</name>
+                    <state>###Uninitialized###</state>
+                </option>
+                <option>
+                    <name>OCXDSDigitalStatesConfigFile</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <debuggerPlugins>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\FreeRtos\FreeRtosArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\Mbed\MbedArmPlugin2.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\OpenRTOS\OpenRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SafeRTOS\SafeRTOSPlugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\SMX\smxAwareIarArm8BE.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\TI-RTOS\tirtosplugin.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-286-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-III\uCOS-III-KA-CSpy.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
+                <loadFlag>1</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\TargetAccessServer\TargetAccessServer.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+            <plugin>
+                <file>$EW_DIR$\common\plugins\uCProbe\uCProbePlugin.ENU.ewplugin</file>
+                <loadFlag>0</loadFlag>
+            </plugin>
+        </debuggerPlugins>
+    </configuration>
+</project>

lib/sdk/Applications/EvKitExamples/BLE_fit/IAR/BLE_fit.ewp

+<?xml version="1.0" encoding="UTF-8"?>
+<project>
+    <fileVersion>3</fileVersion>
+    <configuration>
+        <name>Debug</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>1</debug>
+        <settings>
+            <name>General</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <version>31</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>ExePath</name>
+                    <state>Debug\Exe</state>
+                </option>
+                <option>
+                    <name>ObjPath</name>
+                    <state>Debug\Obj</state>
+                </option>
+                <option>
+                    <name>ListPath</name>
+                    <state>Debug\List</state>
+                </option>
+                <option>
+                    <name>GEndianMode</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>Input description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>Output description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GOutputBinary</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGCoreOrChip</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelect</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelectSlave</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RTDescription</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OGProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>OGLastSavedByProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>GeneralEnableMisra</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVerbose</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGChipSelectEditMenu</name>
+                    <state>Default	None</state>
+                </option>
+                <option>
+                    <name>GenLowLevelInterface</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GEndianModeBE</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGBufferedTerminalOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenStdoutInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>RTConfigPath2</name>
+                    <state>$TOOLKIT_DIR$\inc\c\DLib_Config_Normal.h</state>
+                </option>
+                <option>
+                    <name>GBECoreSlave</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGUseCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OGUseCmsisDspLib</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibThreads</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CoreVariant</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>GFPUDeviceSlave</name>
+                    <state>Default	None</state>
+                </option>
+                <option>
+                    <name>FPU2</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NrRegs</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NEON</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GFPUCoreSlave2</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>OGCMSISPackSelectDevice</name>
+                </option>
+                <option>
+                    <name>OgLibHeap</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGLibAdditionalLocale</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenLocaleTags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLocaleDisplayOnly</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DSPExtension</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>TrustZone</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZoneModes</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ICCARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>35</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>CCDefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>CCPreprocFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocComments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocLine</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCListCFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMnemonics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMessages</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagSuppress</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagRemark</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagWarning</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagError</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCAllowList</name>
+                    <version>1</version>
+                    <state>00000000</state>
+                </option>
+                <option>
+                    <name>CCDebugInfo</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IEndianMode</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLangConformance</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSignedPlainChar</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRequirePrototypes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagWarnAreErr</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCompilerRuntimeInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OutputFile</name>
+                    <state>$FILE_BNAME$.o</state>
+                </option>
+                <option>
+                    <name>CCLibConfigHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>PreInclude</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CompilerMisraOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIncludePath2</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>CCStdIncCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCodeSection</name>
+                    <state>.text</state>
+                </option>
+                <option>
+                    <name>IProcessorMode2</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptLevel</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptStrategy</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptLevelSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>CCPosIndRopi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndRwpi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndNoDynInit</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccLang</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCDialect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccAllowVLA</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccStaticDestr</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccCppInlineSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccFloatSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptimizationNoSizeConstraints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptStrategySlave</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCGuardCalls</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccExceptions2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccRTTI2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OICompilerExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>AARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>10</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>AObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>ACaseSensitivity</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacroChars</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnWhat</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnOne</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ADebug</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AltRegisterNames</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ADefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>AList</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AListHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AListing</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Includes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacDefs</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacExps</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacExec</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OnlyAssed</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MultiLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLengthCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLength</name>
+                    <state>80</state>
+                </option>
+                <option>
+                    <name>TabSpacing</name>
+                    <state>8</state>
+                </option>
+                <option>
+                    <name>AXRef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDefines</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefInternal</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDual</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AOutputFile</name>
+                    <state>$FILE_BNAME$.o</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsEdit</name>
+                    <state>100</state>
+                </option>
+                <option>
+                    <name>AIgnoreStdInclude</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AUserIncludes</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsCheckV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsV2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AsmNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>OBJCOPY</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>OOCOutputFormat</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCOutputOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OOCOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OOCCommandLineProducer</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OOCObjCopyEnable</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CUSTOM</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <extensions></extensions>
+                <cmdline></cmdline>
+                <hasPrio>0</hasPrio>
+            </data>
+        </settings>
+        <settings>
+            <name>BICOMP</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+        <settings>
+            <name>BUILDACTION</name>
+            <archiveVersion>1</archiveVersion>
+            <data>
+                <prebuild></prebuild>
+                <postbuild></postbuild>
+            </data>
+        </settings>
+        <settings>
+            <name>ILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>22</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>IlinkLibIOConfig</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>XLinkMisraHandler</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkInputFileSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOutputFile</name>
+                    <state>BLE_fit.out</state>
+                </option>
+                <option>
+                    <name>IlinkDebugInfoEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkKeepSymbols</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySymbol</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySegment</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryAlign</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkConfigDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkMapFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogInitialization</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogModule</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogSection</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogVeneer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile</name>
+                    <state>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\.iar\config\linker\MAX32665.icf</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFileSlave</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkSuppressDiags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsRem</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsWarn</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsErr</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkWarningsAreErrors</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkUseExtraOptions</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkLowLevelInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAutoLibEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAdditionalLibs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkOverrideProgramEntryLabel</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabelSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabel</name>
+                    <state>__iar_program_start</state>
+                </option>
+                <option>
+                    <name>DoFill</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>FillerByte</name>
+                    <state>0xFF</state>
+                </option>
+                <option>
+                    <name>FillerStart</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>FillerEnd</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>CrcSize</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcAlign</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcPoly</name>
+                    <state>0x11021</state>
+                </option>
+                <option>
+                    <name>CrcCompl</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcBitOrder</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcInitialValue</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>DoCrc</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkBufferedTerminalOutput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkStdoutInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcFullSize</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIElfToolPostProcess</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogAutoLibSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogRedirSymbols</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogUnusedFragments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcReverseByteOrder</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcUseAsInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptInline</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsAllow</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsForce</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptMergeDuplSections</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptUseVfe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptForceVfe</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackAnalysisEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackControlFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkStackCallGraphFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CrcAlgorithm</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcUnitSize</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkThreadsSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogCallGraph</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile_AltDefault</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkHeapSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLocaleSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkTrustzoneImportLibraryOut</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>OILinkExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IARCHIVE</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>1</debug>
+                <option>
+                    <name>IarchiveInputs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IarchiveOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IarchiveOutput</name>
+                    <state>###Unitialized###</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>BILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+    </configuration>
+    <configuration>
+        <name>Release</name>
+        <toolchain>
+            <name>ARM</name>
+        </toolchain>
+        <debug>0</debug>
+        <settings>
+            <name>General</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <version>31</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>ExePath</name>
+                    <state>Release\Exe</state>
+                </option>
+                <option>
+                    <name>ObjPath</name>
+                    <state>Release\Obj</state>
+                </option>
+                <option>
+                    <name>ListPath</name>
+                    <state>Release\List</state>
+                </option>
+                <option>
+                    <name>GEndianMode</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>Input description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>Output description</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GOutputBinary</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGCoreOrChip</name>
+                    <state>2</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelect</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibSelectSlave</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>RTDescription</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OGProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>OGLastSavedByProductVersion</name>
+                    <state>8.32.3.20186</state>
+                </option>
+                <option>
+                    <name>GeneralEnableMisra</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVerbose</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGChipSelectEditMenu</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLowLevelInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GEndianModeBE</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGBufferedTerminalOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenStdoutInterface</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>GeneralMisraVer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GeneralMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>RTConfigPath2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GBECoreSlave</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGUseCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OGUseCmsisDspLib</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GRuntimeLibThreads</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CoreVariant</name>
+                    <version>27</version>
+                    <state>39</state>
+                </option>
+                <option>
+                    <name>GFPUDeviceSlave</name>
+                    <state>-</state>
+                </option>
+                <option>
+                    <name>FPU2</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NrRegs</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>NEON</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GFPUCoreSlave2</name>
+                    <version>27</version>
+                    <state>38</state>
+                </option>
+                <option>
+                    <name>OGCMSISPackSelectDevice</name>
+                </option>
+                <option>
+                    <name>OgLibHeap</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGLibAdditionalLocale</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGPrintfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfVariant</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OGScanfMultibyteSupport</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>GenLocaleTags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>GenLocaleDisplayOnly</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DSPExtension</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZone</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>TrustZoneModes</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>ICCARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>35</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>CCDefines</name>
+                    <state>NDEBUG</state>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>CCPreprocFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocComments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPreprocLine</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCListCFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMnemonics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListCMessages</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCListAssSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagSuppress</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagRemark</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagWarning</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCDiagError</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCAllowList</name>
+                    <version>1</version>
+                    <state>11111110</state>
+                </option>
+                <option>
+                    <name>CCDebugInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IEndianMode</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IExtraOptionsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLangConformance</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCSignedPlainChar</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCRequirePrototypes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCDiagWarnAreErr</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCompilerRuntimeInfo</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CCLibConfigHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>PreInclude</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CompilerMisraOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCIncludePath2</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>CCStdIncCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCCodeSection</name>
+                    <state>.text</state>
+                </option>
+                <option>
+                    <name>IProcessorMode2</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCOptLevel</name>
+                    <state>3</state>
+                </option>
+                <option>
+                    <name>CCOptStrategy</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptLevelSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules98</name>
+                    <version>0</version>
+                    <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+                </option>
+                <option>
+                    <name>CompilerMisraRules04</name>
+                    <version>0</version>
+                    <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+                </option>
+                <option>
+                    <name>CCPosIndRopi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndRwpi</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCPosIndNoDynInit</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccLang</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCDialect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccAllowVLA</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccStaticDestr</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccCppInlineSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IccFloatSemantics</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptimizationNoSizeConstraints</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCOptStrategySlave</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCGuardCalls</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncSource</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CCEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CCEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccExceptions2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IccRTTI2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OICompilerExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>AARM</name>
+            <archiveVersion>2</archiveVersion>
+            <data>
+                <version>10</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>AObjPrefix</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AEndian</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>ACaseSensitivity</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacroChars</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnWhat</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AWarnOne</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange1</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AWarnRange2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ADebug</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AltRegisterNames</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ADefines</name>
+                    <state>$CMSIS_PACK_DEVICE_DEFINES$</state>
+                    <state>_RTE_</state>
+                </option>
+                <option>
+                    <name>AList</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AListHeader</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AListing</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>Includes</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacDefs</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MacExps</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>MacExec</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OnlyAssed</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>MultiLine</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLengthCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>PageLength</name>
+                    <state>80</state>
+                </option>
+                <option>
+                    <name>TabSpacing</name>
+                    <state>8</state>
+                </option>
+                <option>
+                    <name>AXRef</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDefines</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefInternal</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AXRefDual</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AFpuProcessor</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>AOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>ALimitErrorsCheck</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>ALimitErrorsEdit</name>
+                    <state>100</state>
+                </option>
+                <option>
+                    <name>AIgnoreStdInclude</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AUserIncludes</name>
+                    <state>$CMSIS_PACK_DEVICE_INCLUDES$</state>
+                    <state>$CMSIS_PACK_INCLUDES$</state>
+                    <state>$PROJ_DIR$\..</state>
+                    <state>$PROJ_DIR$\..\RTE</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsCheckV2</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>AExtraOptionsV2</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>AsmNoLiteralPool</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>OBJCOPY</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>1</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>OOCOutputFormat</name>
+                    <version>3</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OCOutputOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>OOCOutputFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>OOCCommandLineProducer</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>OOCObjCopyEnable</name>
+                    <state>0</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>CUSTOM</name>
+            <archiveVersion>3</archiveVersion>
+            <data>
+                <extensions></extensions>
+                <cmdline></cmdline>
+                <hasPrio>0</hasPrio>
+            </data>
+        </settings>
+        <settings>
+            <name>BICOMP</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+        <settings>
+            <name>BUILDACTION</name>
+            <archiveVersion>1</archiveVersion>
+            <data>
+                <prebuild></prebuild>
+                <postbuild></postbuild>
+            </data>
+        </settings>
+        <settings>
+            <name>ILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>22</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>IlinkLibIOConfig</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>XLinkMisraHandler</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkInputFileSlave</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOutputFile</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>IlinkDebugInfoEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkKeepSymbols</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySymbol</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinarySegment</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkRawBinaryAlign</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkConfigDefines</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkMapFile</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogFile</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogInitialization</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogModule</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogSection</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogVeneer</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile</name>
+                    <state>lnk0t.icf</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFileSlave</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEnableRemarks</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkSuppressDiags</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsRem</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsWarn</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkTreatAsErr</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkWarningsAreErrors</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkUseExtraOptions</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkExtraOptions</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkLowLevelInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAutoLibEnable</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkAdditionalLibs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkOverrideProgramEntryLabel</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabelSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkProgramEntryLabel</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>DoFill</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>FillerByte</name>
+                    <state>0xFF</state>
+                </option>
+                <option>
+                    <name>FillerStart</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>FillerEnd</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>CrcSize</name>
+                    <version>0</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcAlign</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcPoly</name>
+                    <state>0x11021</state>
+                </option>
+                <option>
+                    <name>CrcCompl</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcBitOrder</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>CrcInitialValue</name>
+                    <state>0x0</state>
+                </option>
+                <option>
+                    <name>DoCrc</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkBE8Slave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkBufferedTerminalOutput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkStdoutInterfaceSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcFullSize</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIElfToolPostProcess</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogAutoLibSelect</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogRedirSymbols</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkLogUnusedFragments</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcReverseByteOrder</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCrcUseAsInput</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptInline</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsAllow</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptExceptionsForce</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkCmsis</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptMergeDuplSections</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkOptUseVfe</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkOptForceVfe</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackAnalysisEnable</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkStackControlFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkStackCallGraphFile</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>CrcAlgorithm</name>
+                    <version>1</version>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>CrcUnitSize</name>
+                    <version>0</version>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkThreadsSlave</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLogCallGraph</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkIcfFile_AltDefault</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IlinkEncInput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutput</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IlinkEncOutputBom</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkHeapSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkLocaleSelect</name>
+                    <state>1</state>
+                </option>
+                <option>
+                    <name>IlinkTrustzoneImportLibraryOut</name>
+                    <state>###Unitialized###</state>
+                </option>
+                <option>
+                    <name>OILinkExtraOption</name>
+                    <state>1</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>IARCHIVE</name>
+            <archiveVersion>0</archiveVersion>
+            <data>
+                <version>0</version>
+                <wantNonLocal>1</wantNonLocal>
+                <debug>0</debug>
+                <option>
+                    <name>IarchiveInputs</name>
+                    <state></state>
+                </option>
+                <option>
+                    <name>IarchiveOverride</name>
+                    <state>0</state>
+                </option>
+                <option>
+                    <name>IarchiveOutput</name>
+                    <state>###Unitialized###</state>
+                </option>
+            </data>
+        </settings>
+        <settings>
+            <name>BILINK</name>
+            <archiveVersion>0</archiveVersion>
+            <data />
+        </settings>
+    </configuration>
+    <file>
+        <name>$PROJ_DIR$\..\main.c</name>
+    </file>
+    <file>
+        <name>$PROJ_DIR$\..\stack_fit.c</name>
+    </file>
+    <file>
+        <name>$PROJ_DIR$\..\fit_main.c</name>        
+    </file>
+    <group>
+        <name>CMSIS-Pack</name>
+        <tag>CMSISPack.Component</tag>
+        <group>
+            <name>Maxim MAX32665 BSP _BSP.EvKit V1_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Source/board.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/led.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/mx25.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/pb.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Boards/Maxim/MAX32665_EVKIT/Common/Source/stdio.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.GPIO_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/gpio.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.Startup_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\cmain.s</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\low_level_init.c</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\max32665.h</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_assert.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_delay.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_lock.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_pins.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/mxc_sys.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/nvic_table.c</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\startup_max32665.s</name>
+            </file>
+            <file>
+                <name>$PROJ_DIR$\RTE\Device\MAX32665_Cortex-M4\system_max32665.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.Timers_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/tmr.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/tmr_utils.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.UART_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/uart.c</name>
+            </file>
+        </group>
+        <group>
+            <name>Maxim Maxim API _Device.XiP Flash_0.2.8-b</name>
+            <tag>CMSISPack.Component</tag>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/spixf.c</name>
+            </file>
+            <file>
+                <name>${CMSIS_PACK_PATH_Maxim#MAX32665#0.3.0}$\Libraries/MAX32665PeriphDriver/Source/spixfc.c</name>
+            </file>
+        </group>
+        <file>
+            <name>$PROJ_DIR$\RTE\RTE_Components.h</name>
+        </file>
+    </group>
+    <cmsisPackSettings>
+        <rte>&lt;?xml version="1.0" encoding="UTF-8" standalone="no"?&gt;
+
+&lt;configuration xmlns:xs="http://www.w3.org/2001/XMLSchema-instance"&gt;
+
+  &lt;packages/&gt;
+
+  &lt;device Dclock="96000000" Dcore="Cortex-M4" DcoreVersion="r0p1" Dendian="Little-endian" Dfamily="MAX32665-66" Dfpu="SP_FPU" Dmpu="NO_MPU" Dname="MAX32665" Dvendor="Maxim:23" Pname="Cortex-M4" Punits="2" info="ARM Cortex-M4 96 MHz, 512 kB RAM, 1 MB ROM" url="http://www.keil.com/dd2/maxim/max32665"&gt;
+
+    &lt;package info="Maxim Integrated MAX32665 Series Device Support, Board Support Package and Examples" name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+  &lt;/device&gt;
+
+  &lt;toolchain Tcompiler="IAR" Toutput="exe"/&gt;
+
+  &lt;components&gt;
+
+    &lt;component Cbundle="MAX32665 BSP" Cclass="BSP" Cgroup="EvKit V1" Cvendor="Maxim" Cversion="0.3.0"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="include" name="Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Include/"/&gt;
+
+      &lt;file category="include" name="Boards/Maxim/MAX32665_EVKIT/Common/Include/"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/EvKit_V1/Source/board.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/stdio.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/pb.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/led.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" name="Boards/Maxim/MAX32665_EVKIT/Common/Source/mx25.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="5.1.1"&gt;
+
+      &lt;package name="CMSIS" url="http://www.keil.com/pack/" vendor="ARM" version="5.3.0"/&gt;
+
+      &lt;file category="doc" name="CMSIS/Documentation/Core/html/index.html"/&gt;
+
+      &lt;file category="include" name="CMSIS/Include/"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="GPIO" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/gpio.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="Startup" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="include" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Include/" version="0.3.0"/&gt;
+
+      &lt;file category="include" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Include/" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceAsm" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/startup_max32665.s" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceC" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/low_level_init.c" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceAsm" condition="Startup IAR" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/IAR/cmain.s" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="sourceC" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Source/system_max32665.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/nvic_table.c" version="0.3.0"/&gt;
+
+      &lt;file attr="config" category="header" deviceDependent="1" name="Libraries/Device/Maxim/MAX32665/Include/max32665.h" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_assert.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_delay.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_lock.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_pins.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/mxc_sys.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/nvic_table.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="UART" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/uart.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="XiP Flash" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/spixfc.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/spixf.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;
+
+    &lt;component Cbundle="Maxim BTLE" Cclass="Bluetooth" Cgroup="Bluetooth LE" Cvendor="Maxim" Cversion="0.3.0"&gt;
+
+       &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+       &lt;file category="include" name="Libraries/BTLE/wsf/baremetal/sources/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/wsf/common/include/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/controller/sources/mac/include/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/wsf/common/include/util/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-host/include/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/platform/common/include/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/controller/sources/mac/cfg/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/apps/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/apps/app/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-host/sources/stack/cfg/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/profiles/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/profiles/include/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/include/app/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-profiles/sources/services/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-host/sources/stack/hci/"/&gt;
+      
+       &lt;file category="include" name="Libraries/BTLE/ble-host/sources/hci/exactle/"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd_ae.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd_enc.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd_master.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd_master_ae.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_cmd_phy.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_core_ps.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_evt.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_tr.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_vs.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/hci/exactle/hci_vs_ae.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/ble-host/sources/stack/hci/hci_main.c"/&gt;
+      
+       &lt;file category="sourceC" name="Libraries/BTLE/platform/max32665/sources/ll_math.c"/&gt;
+      
+       &lt;file category="library" name="Libraries/BTLE/lib/IAR/cordiolib.a" condition="Startup IAR"/&gt;
+      
+       &lt;file category="library" name="Libraries/BTLE/lib/IAR/maclib.a" condition="Startup IAR"/&gt;
+      
+       &lt;file category="library" name="Libraries/BTLE/lib/ARM/cordiolib.lib" condition="Startup ARM"/&gt;
+      
+       &lt;file category="library" name="Libraries/BTLE/lib/ARM/maclib.lib" condition="Startup ARM"/&gt;
+
+    &lt;/component&gt;
+    &lt;component Cbundle="Maxim API" Cclass="Device" Cgroup="Timers" Cvendor="Maxim" Cversion="0.3.0" deviceDependent="1"&gt;
+
+      &lt;package name="MAX32665" url="http://www.mxim.net/microcontroller/pack/" vendor="Maxim" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/tmr.c" version="0.3.0"/&gt;
+
+      &lt;file category="sourceC" deviceDependent="1" name="Libraries/MAX32665PeriphDriver/Source/tmr_utils.c" version="0.3.0"/&gt;
+
+    &lt;/component&gt;    
+  &lt;/components&gt;
+
+  &lt;apis/&gt;
+
+&lt;/configuration&gt;
+
+</rte>
+    </cmsisPackSettings>
+</project>