From 6c8d653cfd3f778a22dc7eb33e31cc0f5315850b Mon Sep 17 00:00:00 2001
From: dequis <dx@dxzone.com.ar>
Date: Sun, 26 Nov 2023 15:35:59 +0100
Subject: [PATCH] tools/dist.sh: sync README text to match updating_firmware in
docs
---
tools/dist.sh | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/tools/dist.sh b/tools/dist.sh
index dce7bde7ef..c3dd780637 100755
--- a/tools/dist.sh
+++ b/tools/dist.sh
@@ -48,9 +48,16 @@ There are three ways to install this firmware to your badge:
If you have a web browser which supports WebSerial, you can connect your badge
to your computer then navigate to:
- https://flash.flow3r.garden/?v=${version}
+ https://flow3r.garden/flasher/
-// Option 2: Update via the badge
+// Option 2: Update via updat3r
+
+Since firmware v1.3.0, there is a built-in wifi updater.
+
+Ensure wifi is connected, and then go to Settings -> Check For Updates and
+follow the instructions.
+
+// Option 3: Update via the badge
Put your badge into SD Card Disk Mode: either by selecting 'Disk Mode (SD)'
from the badge's System menu, or by rebooting into Recovery Mode (by holding
@@ -62,14 +69,14 @@ Now, with the badge connected to a computer, you should see a USB Mass Storage
Then, stop disk mode, and from the Recovery Mode (boot the badge with the right
trigger pushed down), select 'Flash Firmware Image', then flow3r.bin.
-// Option 3: Update using esptool.py
+// Option 4: Update using esptool.py
-You can also fully flash the badge, meaning you can update it even if its
-firmware is totally bricked. To do that, start the badge in bootrom mode (this
-is different from recovery mode!) by holding down the left trigger while
-powering it up.
+You can also fully flash the badge from the commandline. To do that, start the
+badge in bootloader mode (this is different from recovery mode!) by holding
+down the left trigger while powering it up.
-Then, run esptool.py with the following arguments:
+Extract the .bin files from a release tarball, and run esptool.py with the
+following arguments:
esptool.py -p /dev/ttyACM0 -b 460800 \\
--before default_reset --after no_reset --chip esp32s3 \\
--
GitLab