Forked from
card10 / firmware
908 commits behind the upstream repository.
-
OpenOCD tried Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'. using a JLink debugger. Overriding it with SWD is what I did. With the CMSIS debugger OpenOCD you get lucky: Info : auto-selecting first available session transport "swd". Hope forcing it always to SWD will make it easier for others using different debuggers.OpenOCD tried Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'. using a JLink debugger. Overriding it with SWD is what I did. With the CMSIS debugger OpenOCD you get lucky: Info : auto-selecting first available session transport "swd". Hope forcing it always to SWD will make it easier for others using different debuggers.
max32665.cfg 533 B
# Maxim Integrated MAX32665 OpenOCD target configuration file
# www.maximintegrated.com
# selecting transport method, to prevenet auto-selecting something else
transport select swd
# Set the reset pin configuration
reset_config none
#reset_config srst_only
#adapter_nsrst_delay 200
# Set flash parameters
set FLASH_BASE 0x10000000
set FLASH_BASE1 0x10080000
set FLASH_SIZE 0x80000
set FLC_BASE 0x40029000
set FLC_BASE1 0x40029400
set FLASH_SECTOR 0x2000
set FLASH_CLK 96
set FLASH_OPTIONS 0x01
source [find target/max32xxx.cfg]