Merge branch 'rahix/fix-bme' into 'master'

Fix BME680 Bugs

See merge request !188

epicardium/modules/bme680.c

-#include <stdbool.h>
-#include <stddef.h>
-#include <stdio.h>
+#include "epicardium.h"
+#include "modules/modules.h"
+#include "modules/log.h"
+
+#include "card10.h"
 
 #include "bme680.h"
 #include "bosch.h"
-#include "card10.h"
 
-#include "epicardium.h"
-#include "modules.h"
-#include "modules/log.h"
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdio.h>
 
 #define HEATR_TEMP 320
 #define HEATR_DUR 150
@@ -19,6 +20,8 @@ static struct bme680_dev bme;
 static int convert_error(int8_t error)
 {
 	switch (error) {
+	case BME680_OK:
+		return 0;
 	case BME680_E_NULL_PTR:
 		return EFAULT;
 	case BME680_E_COM_FAIL:
@@ -36,67 +39,87 @@ int epic_bme680_init()
 {
 	int8_t result = BME680_OK;
 
-	if (__builtin_expect(!initialized, 0)) {
-		bme.dev_id   = BME680_I2C_ADDR_PRIMARY;
-		bme.intf     = BME680_I2C_INTF;
-		bme.read     = card10_bosch_i2c_read;
-		bme.write    = card10_bosch_i2c_write;
-		bme.delay_ms = card10_bosch_delay;
-		/* amb_temp can be set to 25 prior to configuring the gas sensor
-     * or by performing a few temperature readings without operating the gas sensor.
-     */
-		bme.amb_temp = 25;
-
-		result = bme680_init(&bme);
-		if (result != BME680_OK) {
-			LOG_ERR("bme680", "bme680_init error: %d\n", result);
-			return -convert_error(result);
-		}
-
-		/* Select the power mode */
-		/* Must be set before writing the sensor configuration */
-		bme.power_mode = BME680_FORCED_MODE;
-
-		/* Set the temperature, pressure and humidity settings */
-		bme.tph_sett.os_hum  = BME680_OS_2X;
-		bme.tph_sett.os_pres = BME680_OS_4X;
-		bme.tph_sett.os_temp = BME680_OS_8X;
-		bme.tph_sett.filter  = BME680_FILTER_SIZE_3;
-
-		/* Set the remaining gas sensor settings and link the heating profile */
-		bme.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
-		/* Create a ramp heat waveform in 3 steps */
-		bme.gas_sett.heatr_temp = HEATR_TEMP; /* degree Celsius */
-		bme.gas_sett.heatr_dur  = HEATR_DUR;  /* milliseconds */
-
-		/* Set the required sensor settings needed */
-		uint16_t settings_sel = BME680_OST_SEL | BME680_OSP_SEL |
-					BME680_OSH_SEL | BME680_FILTER_SEL |
-					BME680_GAS_SENSOR_SEL;
-
-		result = bme680_set_sensor_settings(settings_sel, &bme);
-		if (result != BME680_OK) {
-			LOG_ERR("bme680",
-				"bme680_set_sensor_settings error: %d\n",
-				result);
-			return -convert_error(result);
-		}
-
-		initialized = true;
+	if (initialized) {
+		return 0;
 	}
-	return 0;
+
+	if (hwlock_acquire(HWLOCK_I2C, pdMS_TO_TICKS(100)) < 0) {
+		return -EBUSY;
+	}
+
+	bme.dev_id   = BME680_I2C_ADDR_PRIMARY;
+	bme.intf     = BME680_I2C_INTF;
+	bme.read     = card10_bosch_i2c_read;
+	bme.write    = card10_bosch_i2c_write;
+	bme.delay_ms = card10_bosch_delay;
+
+	/*
+	 * amb_temp can be set to 25 prior to configuring the gas sensor
+	 * or by performing a few temperature readings without operating
+	 * the gas sensor.
+	 */
+	bme.amb_temp = 25;
+
+	result = bme680_init(&bme);
+	if (result != BME680_OK) {
+		LOG_ERR("bme680", "bme680_init error: %d\n", result);
+		goto err;
+	}
+
+	/*
+	 * Select the power mode.  Must be set before writing the sensor
+	 * configuration
+	 */
+	bme.power_mode = BME680_FORCED_MODE;
+
+	/* Set the temperature, pressure and humidity settings */
+	bme.tph_sett.os_hum  = BME680_OS_2X;
+	bme.tph_sett.os_pres = BME680_OS_4X;
+	bme.tph_sett.os_temp = BME680_OS_8X;
+	bme.tph_sett.filter  = BME680_FILTER_SIZE_3;
+
+	/* Set the remaining gas sensor settings and link the heating profile */
+	bme.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS;
+	/* Create a ramp heat waveform in 3 steps */
+	bme.gas_sett.heatr_temp = HEATR_TEMP; /* degree Celsius */
+	bme.gas_sett.heatr_dur  = HEATR_DUR;  /* milliseconds */
+
+	/* Set the required sensor settings needed */
+	uint16_t settings_sel = BME680_OST_SEL | BME680_OSP_SEL |
+				BME680_OSH_SEL | BME680_FILTER_SEL |
+				BME680_GAS_SENSOR_SEL;
+
+	result = bme680_set_sensor_settings(settings_sel, &bme);
+	if (result != BME680_OK) {
+		LOG_ERR("bme680",
+			"bme680_set_sensor_settings error: %d\n",
+			result);
+		goto err;
+	}
+
+	initialized = true;
+	result      = BME680_OK;
+err:
+	hwlock_release(HWLOCK_I2C);
+	return -convert_error(result);
 }
 
 int epic_bme680_deinit()
 {
-	int8_t result = BME680_OK;
+	if (!initialized) {
+		return 0;
+	}
+
+	if (hwlock_acquire(HWLOCK_I2C, pdMS_TO_TICKS(100)) < 0) {
+		return -EBUSY;
+	}
 
-	result = bme680_soft_reset(&bme);
+	int8_t result = bme680_soft_reset(&bme);
 	if (result != BME680_OK) {
 		LOG_ERR("bme680", "bme680_soft_reset error: %d\n", result);
-		return -convert_error(result);
 	}
 
+	hwlock_release(HWLOCK_I2C);
 	initialized = false;
 	return 0;
 }
@@ -110,29 +133,43 @@ int epic_bme680_read_sensors(struct bme680_sensor_data *data)
 		return -EINVAL;
 	}
 
+	if (hwlock_acquire(HWLOCK_I2C, pdMS_TO_TICKS(100)) < 0) {
+		return -EBUSY;
+	}
+
 	uint16_t profile_dur = 0;
 	bme680_get_profile_dur(&profile_dur, &bme);
 
 	result = bme680_set_sensor_mode(&bme); /* Trigger a measurement */
 	if (result != BME680_OK) {
 		LOG_ERR("bme680", "bme680_set_sensor_mode error: %d\n", result);
-		return -convert_error(result);
+		goto err;
 	}
 
-	vTaskDelay(pdMS_TO_TICKS(
-		profile_dur)); /* Wait for the measurement to complete */
+	/*
+	 * Wait for the measurement to complete.  Release the I2C lock in the
+	 * meantime.
+	 */
+	hwlock_release(HWLOCK_I2C);
+	vTaskDelay(pdMS_TO_TICKS(profile_dur));
+	if (hwlock_acquire(HWLOCK_I2C, pdMS_TO_TICKS(100)) < 0) {
+		return -EBUSY;
+	}
 
 	struct bme680_field_data raw_data;
 	result = bme680_get_sensor_data(&raw_data, &bme);
 	if (result != BME680_OK) {
 		LOG_ERR("bme680", "bme680_get_sensor_data error: %d\n", result);
-		return -convert_error(result);
+		goto err;
 	}
 
-	data->temperature    = raw_data.temperature / 100.0l;
-	data->humidity       = raw_data.humidity / 1000.0l;
-	data->pressure       = raw_data.pressure / 100.0l;
+	data->temperature    = (float)raw_data.temperature / 100.0f;
+	data->humidity       = raw_data.humidity / 1000.0f;
+	data->pressure       = raw_data.pressure / 100.0f;
 	data->gas_resistance = raw_data.gas_resistance;
 
-	return 0;
+	result = BME680_OK;
+err:
+	hwlock_release(HWLOCK_I2C);
+	return -convert_error(result);
 }

pycardium/modules/bme680.c

@@ -12,7 +12,7 @@ static mp_obj_t mp_bme680_init()
 		mp_raise_OSError(-ret);
 	}
 
-	return 0;
+	return mp_const_none;
 }
 static MP_DEFINE_CONST_FUN_OBJ_0(bme680_init_obj, mp_bme680_init);
 
@@ -24,7 +24,7 @@ static mp_obj_t mp_bme680_deinit()
 		mp_raise_OSError(-ret);
 	}
 
-	return 0;
+	return mp_const_none;
 }
 static MP_DEFINE_CONST_FUN_OBJ_0(bme680_deinit_obj, mp_bme680_deinit);