### How-To wire and solder an ECG-Cable for the Card10 badge
Cut off USB-A connector as we don't have use for it
Slide the big shrinking tube over the USB cable
Separate the wires as shown in the picture
Cut off all wires ecxept for orange and purple
Move the two small shrinking tubes over the ECG wires
Solder the ECG wires to the USB wires as shown in the pictures
Test your ECG setup on your Card10 prior the next step
Slide the small shrinking tubes over the soldering connections and apply hot air (e.g. lighter)
Slide the bigger shrinking tube over the two small ones and also shrink it
Have fun and hack ECG stuff
### Usage
#### ECG
Place the electrodes on your chest as shown in the picture and connect the USB-C connector with the USB symbol downwards. After starting the ECG application on your Card10 press the right lower button (RIGHT) to switch over to ECG over USB. If you want to start logging your ECG data press the lower left button (LEFT) to start and stop logging.
#### Eye movement detection and muscle activity
To detect eye movements like fast movements to the left or right or to detect REM phase while at sleep, place your electrodes on your temples.
