@@ -20,7 +20,7 @@ A total of 4 GPIO pins, as well as 3.3V and GND contacts are available for sewin
The pitch of the small holes between the sewable connectors fits a 2.54 mm pin header, so if you rather work with solder than thread, you can use an angled pin header to access the sewable connectors. Additional debugging pins are also available through the small contacts between the five sewable connectors on each side.
### USB-C spare pins
Besides the usual USB pins, we made some special contacts e.g. I2C, Uart and contacts for attaching EKG probes available on the USB-C connector. You can find more details on the [USB-C](en/usbc) page.
Besides the usual USB pins, we made some special contacts e.g. I2C, Uart and contacts for attaching EKG probes available on the USB-C connector. You can find more details on the [USB-C](en/usbc.md) page.
### Wristband
...
...
@@ -31,7 +31,7 @@ the top PCB is a fairly simple 2 layer board, you can make a customized top PCB
## Wireless Interfaces
### Bluetooth Low Energy
Below an overview of ble interhacktions; for more details see the [ble page](en/ble)
Below an overview of ble interhacktions; for more details see the [ble page](en/ble.md)
