Skip to content
Snippets Groups Projects
Normal view Permalink
arm7_ft2232.cfg 846 B
Newer Older
  • Learn to ignore specific revisions
    • drath's avatar
    - prepare OpenOCD for branching, created ./trunk/
    drath committed
    1 2 3 4 5 
    #daemon configuration
telnet_port 4444
gdb_port 3333

#interface
    drath's avatar
    - updated configuration examples, installation instructions and README...  
    drath committed
    6 
    interface ft2232
    drath's avatar
    - fixed bug in .cfg files. Thanks to Michael Fischer for noticing this.  
    drath committed
    7 8 9 
    ft2232_device_desc "Amontec JTAGkey A"
ft2232_layout jtagkey
ft2232_vid_pid 0x0403 0xcff8
    drath's avatar
    - endianess fixes everywhere but in the flash code. flashing might still be...  
    drath committed
    10 
    jtag_speed 2
    drath's avatar
    - prepare OpenOCD for branching, created ./trunk/
    drath committed
    11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 
    #use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst srst_pulls_trst

#jtag scan chain
#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
jtag_device 4 0x1 0xf 0xe

#target configuration
daemon_startup reset
#target <type> <startup mode>
#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
target_script 0 reset h2294_init.script
run_and_halt_time 0 30
working_area 0 0x40000000 0x40000 nobackup

#flash configuration
flash bank lpc2000 0x0 0x40000 0 0 lpc2000_v1 0 14765 calc_checksum
flash bank cfi 0x80000000 0x400000 2 2 0