wip

git-svn-id: svn://svn.berlios.de/openocd/trunk@1312 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/target/imx31.cfg

 # imx31 config
 #
-# NB! Does not work yet. Work in progress
+
+reset_config trst_and_srst
 
 if { [info exists CHIPNAME] } {	
    set  _CHIPNAME $CHIPNAME    
@@ -17,8 +18,13 @@ if { [info exists ENDIAN] } {
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   set _CPUTAPID 0x07b3601d
+}
+
+if { [info exists SDMATAPID ] } {
+   set _SDMATAPID $SDMATAPID
+} else {
+   set _SDMATAPID 0x2190101d
 }
 
 #========================================
@@ -27,9 +33,9 @@ if { [info exists CPUTAPID ] } {
 if { [info exists SJCTAPID ] } {
    set _SJCTAPID $SJCTAPID
 } else {
-   set _SJCTAPID 0xffffffff
+   set _SJCTAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 00 irmask 0x0 -expected-id $_SJCTAPID
+jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id $_SJCTAPID
 
 # The "SDMA" - <S>mart <DMA> controller debug tap
 # Based on some IO pins - this can be disabled & removed
@@ -38,28 +44,19 @@ jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 00 irmask 0x0 -expected-id $_SJCT
 #    SJC_MOD - controls multiplexer - disables ARM1136
 #    SDMA_BYPASS - disables SDMA    - 
 #  
-if { [info exists SDMATAPID ] } {
-   set _SDMATAPID $SDMATAPID
-} else {
-   set _SDMATAPID 0xffffffff
-}
-# Per section 40.17.1, table 40-85 the IR register is 4 bits
-# But this conflicts with Diagram 6-13, "3bits ir and drs"
-jtag newtap $_CHIPNAME smda -irlen 4 -ircapture 0xe -irmask 0xf -expected-id $_SJCTAPID
-
-# The ARM11 core tap
-if { [info exists CPUTAPID ] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0xffffffff
-}
 # Per ARM: DDI0211J_arm1136_r1p5_trm.pdf - the ARM 1136 as a 5 bit IR register
-jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1e irmask 0x1f -expected-id $_SJCTAPID
+jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1e -irmask 0x1f -expected-id $_CPUTAPID
 
+# No IDCODE for this TAP
+jtag newtap $_CHIPNAME whatchacallit -irlen 4 -ircapture 0 -irmask 0xf -expected-id 0x0
 
-jtag_nsrst_delay 500
-jtag_ntrst_delay 500
+# Per section 40.17.1, table 40-85 the IR register is 4 bits
+# But this conflicts with Diagram 6-13, "3bits ir and drs"
+jtag newtap $_CHIPNAME smda -irlen 4 -ircapture 0xe -irmask 0xf -expected-id $_SDMATAPID
 
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
+
+proc power_restore {} { puts "Sensed power restore. No action." } 
+proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }