Skip to content
Snippets Groups Projects
Commit 43b38078 authored by oharboe's avatar oharboe
Browse files

Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba TX09 familiy 

git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
parent 1c262c88
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
tcl/board/topas910.cfg 0 → 100644
+ 118
− 0
View file @ 43b38078
######################################
# Target: Toshiba TOPAS910 -- TMPA910 Starterkit
#
######################################
# We add to the minimal configuration.
source [find target/tmpa910.cfg]
######################
# Target configuration
######################
#$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { topas910_init }
proc topas910_init { } {
# Init PLL
# my settings
mww 0xf005000c 0x00000007
mww 0xf0050010 0x00000065
mww 0xf005000c 0x000000a7
sleep 10
mdw 0xf0050008
mww 0xf0050008 0x00000002
mww 0xf0050004 0x00000000
# NEW: set CLKCR5
mww 0xf0050054 0x00000040
#
sleep 10
# Init SDRAM
# _PMCDRV = 0x00000071;
# //
# // Initialize SDRAM timing paramater
# //
# _DMC_CAS_LATENCY = 0x00000006;
# _DMC_T_DQSS = 0x00000000;
# _DMC_T_MRD = 0x00000002;
# _DMC_T_RAS = 0x00000007;
#
# _DMC_T_RC = 0x0000000A;
# _DMC_T_RCD = 0x00000013;
#
# _DMC_T_RFC = 0x0000010A;
#
# _DMC_T_RP = 0x00000013;
# _DMC_T_RRD = 0x00000002;
# _DMC_T_WR = 0x00000002;
# _DMC_T_WTR = 0x00000001;
# _DMC_T_XP = 0x0000000A;
# _DMC_T_XSR = 0x0000000B;
# _DMC_T_ESR = 0x00000014;
#
# //
# // Configure SDRAM type parameter
# _DMC_MEMORY_CFG = 0x00008011;
# _DMC_USER_CONFIG = 0x00000011;
# // 32 bit memory interface
#
#
# _DMC_REFRESH_PRD = 0x00000A60;
# _DMC_CHIP_0_CFG = 0x000140FC;
#
# _DMC_DIRECT_CMD = 0x000C0000;
# _DMC_DIRECT_CMD = 0x00000000;
#
# _DMC_DIRECT_CMD = 0x00040000;
# _DMC_DIRECT_CMD = 0x00040000;
# _DMC_DIRECT_CMD = 0x00080031;
# //
# // Finally start SDRAM
# //
# _DMC_MEMC_CMD = MEMC_CMD_GO;
# */
mww 0xf0020260 0x00000071
mww 0xf4300014 0x00000006
mww 0xf4300018 0x00000000
mww 0xf430001C 0x00000002
mww 0xf4300020 0x00000007
mww 0xf4300024 0x0000000A
mww 0xf4300028 0x00000013
mww 0xf430002C 0x0000010A
mww 0xf4300030 0x00000013
mww 0xf4300034 0x00000002
mww 0xf4300038 0x00000002
mww 0xf430003C 0x00000001
mww 0xf4300040 0x0000000A
mww 0xf4300044 0x0000000B
mww 0xf4300048 0x00000014
mww 0xf430000C 0x00008011
mww 0xf4300304 0x00000011
mww 0xf4300010 0x00000A60
mww 0xf4300200 0x000140FC
mww 0xf4300008 0x000C0000
mww 0xf4300008 0x00000000
mww 0xf4300008 0x00040000
mww 0xf4300008 0x00040000
mww 0xf4300008 0x00080031
mww 0xf4300004 0x00000000
sleep 10
# jtag_speed 10000
# remap off in case of IROM boot
mww 0xf0000004 0x00000001
}
# comment the following out if usinf J-Link, it soes not support DCC
arm7_9 dcc_downloads enable # Enable faster DCC downloads
#####################
# Flash configuration
#####################
#flash bank cfi <base> <size> <chip width> <bus width> <target#>
flash bank cfi 0x20000000 0x2000000 2 2 0
tcl/board/topasa900.cfg 0 → 100644
+ 125
− 0
View file @ 43b38078
# Thanks to Pieter Conradie for this script!
# Target: Toshiba TOPAS900 -- TMPA900 Starterkit
######################################
# We add to the minimal configuration.
source [find target/tmpa900.cfg]
######################
# Target configuration
######################
#$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { topasa900_init }
proc topasa900_init { } {
# Init PLL
# my settings
mww 0xf005000c 0x00000007
mww 0xf0050010 0x00000065
mww 0xf005000c 0x000000a7
sleep 10
mdw 0xf0050008
mww 0xf0050008 0x00000002
mww 0xf0050004 0x00000000
# NEW: set CLKCR5
mww 0xf0050054 0x00000040
#
# bplan settings
# mww 0xf0050004 0x00000000
# mww 0xf005000c 0x000000a7
# sleep 10
# mdw 0xf0050008
# mww 0xf0050008 0x00000002
# mww 0xf0050010 0x00000065
# mww 0xf0050054 0x00000040
sleep 10
# Init SDRAM
# _PMCDRV = 0x00000071;
# //
# // Initialize SDRAM timing paramater
# //
# _DMC_CAS_LATENCY = 0x00000006;
# _DMC_T_DQSS = 0x00000000;
# _DMC_T_MRD = 0x00000002;
# _DMC_T_RAS = 0x00000007;
#
# _DMC_T_RC = 0x0000000A;
# _DMC_T_RCD = 0x00000013;
#
# _DMC_T_RFC = 0x0000010A;
#
# _DMC_T_RP = 0x00000013;
# _DMC_T_RRD = 0x00000002;
# _DMC_T_WR = 0x00000002;
# _DMC_T_WTR = 0x00000001;
# _DMC_T_XP = 0x0000000A;
# _DMC_T_XSR = 0x0000000B;
# _DMC_T_ESR = 0x00000014;
#
# //
# // Configure SDRAM type parameter
# _DMC_MEMORY_CFG = 0x00008011;
# _DMC_USER_CONFIG = 0x00000011; // 32 bit memory interface
#
#
# _DMC_REFRESH_PRD = 0x00000A60;
# _DMC_CHIP_0_CFG = 0x000140FC;
#
# _DMC_DIRECT_CMD = 0x000C0000;
# _DMC_DIRECT_CMD = 0x00000000;
#
# _DMC_DIRECT_CMD = 0x00040000;
# _DMC_DIRECT_CMD = 0x00040000;
# _DMC_DIRECT_CMD = 0x00080031;
# //
# // Finally start SDRAM
# //
# _DMC_MEMC_CMD = MEMC_CMD_GO;
# */
mww 0xf0020260 0x00000071
mww 0xf4300014 0x00000006
mww 0xf4300018 0x00000000
mww 0xf430001C 0x00000002
mww 0xf4300020 0x00000007
mww 0xf4300024 0x0000000A
mww 0xf4300028 0x00000013
mww 0xf430002C 0x0000010A
mww 0xf4300030 0x00000013
mww 0xf4300034 0x00000002
mww 0xf4300038 0x00000002
mww 0xf430003C 0x00000001
mww 0xf4300040 0x0000000A
mww 0xf4300044 0x0000000B
mww 0xf4300048 0x00000014
mww 0xf430000C 0x00008011
mww 0xf4300304 0x00000011
mww 0xf4300010 0x00000A60
mww 0xf4300200 0x000140FC
mww 0xf4300008 0x000C0000
mww 0xf4300008 0x00000000
mww 0xf4300008 0x00040000
mww 0xf4300008 0x00040000
mww 0xf4300008 0x00080031
mww 0xf4300004 0x00000000
sleep 10
# jtag_speed 10000
# remap off in case of IROM boot
mww 0xf0000004 0x00000001
}
# comment the following out if usinf J-Link, it soes not support DCC
arm7_9 dcc_downloads enable # Enable faster DCC downloads
#####################
# Flash configuration
#####################
#flash bank cfi <base> <size> <chip width> <bus width> <target#>
flash bank cfi 0x20000000 0x1000000 2 2 0
tcl/target/tmpa900.cfg 0 → 100644
+ 56
− 0
View file @ 43b38078
######################################
# Target: Toshiba TMPA910
######################################
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME tmpa910
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0x07926031
}
#TMPA910 has following IDs:
# CP15.0 register 0x41069265
# CP15.1 register 0x1d152152
# ARM core 0x07926031
#
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
jtag_nsrst_delay 20
jtag_ntrst_delay 20
######################
# Target configuration
######################
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
# built-in RAM0
#working_area 0 0xf8004000 0x4000 nobackup
# built-in RAM1
#working_area 1 0xf8008000 0x4000 nobackup
# built-in RAM2
#working_area 2 0xf800c000 0x4000 nobackup
# built-in RAM 0-2 48k total
#working_area 0 0xf8004000 0xc000 nobackup
# Internal sram1 memory
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0x8000 \
-work-area-backup 0
tcl/target/tmpa910.cfg 0 → 100644
+ 56
− 0
View file @ 43b38078
######################################
# Target: Toshiba TMPA910
######################################
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME tmpa910
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
# force an error till we get a good number
set _CPUTAPID 0x07926031
}
#TMPA910 has following IDs:
# CP15.0 register 0x41069265
# CP15.1 register 0x1d152152
# ARM core 0x07926031
#
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
#use combined on interfaces or targets that can't set TRST/SRST separately
reset_config trst_and_srst
jtag_nsrst_delay 20
jtag_ntrst_delay 20
######################
# Target configuration
######################
set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
# built-in RAM0
#working_area 0 0xf8004000 0x4000 nobackup
# built-in RAM1
#working_area 1 0xf8008000 0x4000 nobackup
# built-in RAM2
#working_area 2 0xf800c000 0x4000 nobackup
# built-in RAM 0-2 48k total
#working_area 0 0xf8004000 0xc000 nobackup
# Internal sram1 memory
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \
-work-area-backup 0
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment