David Claffey <dnclaffey@gmail.com> get rid of reset recursion

git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/ar71xx.cfg

@@ -13,16 +13,17 @@ jtag newtap $CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id 1
 set TARGETNAME [format "%s.cpu" $CHIPNAME]
 target create $TARGETNAME mips_m4k -endian big -chain-position $TARGETNAME
 
-$TARGETNAME configure -event reset-init {
+$TARGETNAME configure -event reset-halt-post {
 	#setup PLL to lowest common denominator 300/300/150 setting
 	mww 0xb8050000 0x000f40a3	# reset val + CPU:3 DDR:3 AHB:0
 	mww 0xb8050000 0x800f40a3	# send to PLL
 
 	#next command will reset for PLL changes to take effect
 	mww 0xb8050008 3		# set reset_switch and clock_switch (resets SoC)
-	reset halt     			# let openocd know that it is in the reset state
+}
 
-	#initialize_pll
+$TARGETNAME configure -event reset-init {
+	#complete pll initialization
 	mww 0xb8050000 0x800f0080	# set sw_update bit
 	mww 0xb8050008 0		# clear reset_switch bit
 	mww 0xb8050000 0x800f00e8       # clr pwrdwn & bypass