retire daemon_startup

git-svn-id: svn://svn.berlios.de/openocd/trunk@868 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/target/eir-sam7se512.cfg

@@ -5,11 +5,6 @@ reset_config srst_only srst_pulls_trst
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
 
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
 target arm7tdmi little 0 arm7tdmi
 run_and_halt_time 0 30
 

src/target/target/epc9301.cfg

@@ -2,9 +2,7 @@
 jtag_device 4 0x1 0xf 0xe
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
-#target configuration
-daemon_startup attach
-#target <type> <endianess> <reset mode>
+
 target arm920t little 0
 working_area 0 0x80014000 0x1000 backup
 #flash configuration

src/target/target/hammer.cfg

@@ -9,9 +9,6 @@ reset_config trst_and_srst
 jtag_device 4 0x1 0xf 0xe
 
 
-#target configuration
-daemon_startup reset
-#target <type> <endianess> <reset mode>
 target arm920t little 0 arm920t
 
 # speed up memory downloads

src/target/target/ipx42x.cfg

 #xscale ixp42x CPU
 
-#use combined on interfaces or targets that cant set TRST/SRST separately
+#use combined on interfaces or targets that can?t set TRST/SRST separately
 reset_config srst_only srst_pulls_trst
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 7 0x1 0x7f 0x7e
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
 target xscale big 0 IXP42x
 run_and_halt_time 0 30

src/target/target/lpc2129.cfg

@@ -4,10 +4,6 @@ reset_config trst_and_srst srst_pulls_trst
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 4 0x1 0xf 0xe
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
 target arm7tdmi little 0 arm7tdmi-s_r4
 run_and_halt_time 0 30
 working_area 0 0x40000000 0x4000 nobackup

src/target/target/netx500.cfg

@@ -6,8 +6,5 @@ reset_config trst_and_srst
 jtag_device 4 0x1 0xf 0xe
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
-#target configuration
-daemon_startup reset
-#target <type> <endianness> <startup mode> <chainpos> <variant>
 target arm926ejs little 0 arm926ejs
 run_and_halt_time 0 500

src/target/target/omap5912.cfg

@@ -10,10 +10,6 @@ jtag_device 38 0x0 0x0 0x0
 jtag_device 4  0x1 0x0 0xe
 jtag_device 8  0x0 0x0 0x0
 
-#target configuration
-daemon_startup reset
-
-#target <type> <endianness> <reset mode> <chainpos> <variant>
 target arm926ejs little 1 arm926ejs
 target_script 0 reset event/omap5912_reset.script
 run_and_halt_time 0 30

src/target/target/pxa270.cfg

@@ -10,8 +10,6 @@ reset_config trst_and_srst separate
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag_device 7 0x1 0x7f 0x7e
-#target configuration
-daemon_startup reset
 target xscale little 0 pxa27x
 # maps to PXA internal RAM. If you are using a PXA255
 # you must initialize SDRAM or leave this option off

src/target/target/str730.cfg

@@ -22,11 +22,6 @@ jtag_device 4 0x1 0xf 0xe
 jtag_nsrst_delay 500
 jtag_ntrst_delay 500
 
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
 target arm7tdmi little 0 arm7tdmi
 
 run_and_halt_time 0 30

src/target/target/str9comstick.cfg

@@ -12,10 +12,6 @@ reset_config trst_and_srst
 jtag_device 8 0x1 0x1 0xfe
 jtag_device 4 0x1 0xf 0xe
 jtag_device 5 0x1 0x1 0x1e
-#target configuration
-daemon_startup reset
-#target <type> <startup mode>
-#target arm966e <endianness> <reset mode> <chainpos> <variant>
 target arm966e little 1 arm966e
 run_and_halt_time 0 30
 working_area 0 0x50000000 16384 nobackup

src/target/target/xba_revA3.cfg

@@ -9,11 +9,7 @@ jtag_ntrst_delay 100
 #format L IRC IRCM IDCODE (Length, IR Capture, IR capture Mask, IDCODE)
 jtag_device 7 0x1 0x7f 0x7e
 
-daemon_startup reset
-
-#target <type> <endianess> <reset mode> <JTAG pos> <variant>
 target  xscale big           0          ixp42x
-#target  xscale big           0          ixp42x
 target_script 0 reset event/xba_revA3.script
 
 run_and_halt_time 0 100
@@ -21,8 +17,7 @@ run_and_halt_time 0 100
 flash bank cfi 0x50000000 0x400000 2 2 0
 working_area 0 0x20010000 0x8060 nobackup
 
-# halt target
-wait_halt
-
+init 
+reset init
 # set big endian mode
 reg XSCALE_CTRL 0xF8