- added svn props for newly added files

git-svn-id: svn://svn.berlios.de/openocd/trunk@734 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/event/hammer_reset.script

-# Reset Script for the TinCanTools S3C2410 Based Hammer Module
-# http://www.tincantools.com
-#
-# Setup primary clocks and initialize the SDRAM
-mww 0x53000000 0x00000000
-mww 0x4a000008 0xffffffff
-mww 0x4a00000c 0x000007ff
-mww 0x4c000000 0x00ffffff
-mww 0x4c000014 0x00000003
-mww 0x4c000004 0x000a1031
-mww 0x48000000 0x11111122
-mww 0x48000004 0x00000700
-mww 0x48000008 0x00000700
-mww 0x4800000c 0x00000700
-mww 0x48000010 0x00000700
-mww 0x48000014 0x00000700
-mww 0x48000018 0x00000700
-mww 0x4800001c 0x00018005
-mww 0x48000020 0x00018005
-mww 0x48000024 0x009c0459
-mww 0x48000028 0x000000b2
-mww 0x4800002c 0x00000030
-mww 0x48000030 0x00000030
-flash probe 0
+# Reset Script for the TinCanTools S3C2410 Based Hammer Module
+# http://www.tincantools.com
+#
+# Setup primary clocks and initialize the SDRAM
+mww 0x53000000 0x00000000
+mww 0x4a000008 0xffffffff
+mww 0x4a00000c 0x000007ff
+mww 0x4c000000 0x00ffffff
+mww 0x4c000014 0x00000003
+mww 0x4c000004 0x000a1031
+mww 0x48000000 0x11111122
+mww 0x48000004 0x00000700
+mww 0x48000008 0x00000700
+mww 0x4800000c 0x00000700
+mww 0x48000010 0x00000700
+mww 0x48000014 0x00000700
+mww 0x48000018 0x00000700
+mww 0x4800001c 0x00018005
+mww 0x48000020 0x00018005
+mww 0x48000024 0x009c0459
+mww 0x48000028 0x000000b2
+mww 0x4800002c 0x00000030
+mww 0x48000030 0x00000030
+flash probe 0

src/target/interface/flyswatter.cfg

-# Interface Configuration for the TinCanTools FT2232 Based Flyswatter
-# http://www.tincantools.com
-
-#interface
-interface ft2232
-ft2232_device_desc "Flyswatter"
-ft2232_layout "flyswatter"
-ft2232_vid_pid 0x0403 0x6010
-jtag_speed 1
+# Interface Configuration for the TinCanTools FT2232 Based Flyswatter
+# http://www.tincantools.com
+
+#interface
+interface ft2232
+ft2232_device_desc "Flyswatter"
+ft2232_layout "flyswatter"
+ft2232_vid_pid 0x0403 0x6010
+jtag_speed 1

src/target/target/hammer.cfg

-# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
-# http://www.tincantools.com
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-
-#target configuration
-daemon_startup reset
-#target <type> <endianess> <reset mode>
-target arm920t little run_and_init 0 arm920t
-
-# speed up memory downloads
-arm7 fast_memory_access enable
-arm7_9 dcc_downloads enable
-
-target_script 0 reset event/hammer_reset.script
-
-working_area 0 0x30800000 0x20000 nobackup
-run_and_halt_time 0 1000
-
-#flash configuration
-#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x00000000 0x1000000 2 2 0
+# Target Configuration for the TinCanTools S3C2410 Based Hammer Module
+# http://www.tincantools.com
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+
+#target configuration
+daemon_startup reset
+#target <type> <endianess> <reset mode>
+target arm920t little run_and_init 0 arm920t
+
+# speed up memory downloads
+arm7 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+target_script 0 reset event/hammer_reset.script
+
+working_area 0 0x30800000 0x20000 nobackup
+run_and_halt_time 0 1000
+
+#flash configuration
+#flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
+flash bank cfi 0x00000000 0x1000000 2 2 0