deleted superfluous sam7s256 which was identical to sam7x256

git-svn-id: svn://svn.berlios.de/openocd/trunk@924 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/Makefile.am

@@ -20,8 +20,8 @@ noinst_HEADERS = target.h trace.h register.h armv4_5.h embeddedice.h etm.h arm7t
 	etm_dummy.h oocd_trace.h target_request.h trace.h arm11.h mips32.h mips_m4k.h mips_ejtag.h mips32_pracc.h
 
 nobase_dist_pkglib_DATA = xscale/debug_handler.bin target/at91eb40a.cfg \
-	event/at91r40008_reset.script event/sam7s256_reset.script event/sam7x256_reset.script \
-	target/at91r40008.cfg target/lpc2148.cfg target/lpc2148_rclk.cfg target/lpc2148_2mhz.cfg target/lpc2294.cfg target/sam7s256.cfg \
+	event/at91r40008_reset.script event/sam7x256_reset.script \
+	target/at91r40008.cfg target/lpc2148.cfg target/lpc2148_rclk.cfg target/lpc2148_2mhz.cfg target/lpc2294.cfg \
 	target/sam7x256.cfg target/str710.cfg target/str912.cfg target/nslu2.cfg target/pxa255_sst.cfg \
 	target/pxa255.cfg  target/zy1000.cfg event/zy1000_reset.script event/at91sam9260_reset.script target/at91sam9260.cfg \
 	target/wi-9c.cfg event/wi-9c_reset.script event/pxa255_reset.script target/stm32.cfg  target/xba_revA3.cfg event/xba_revA3.script \

src/target/event/sam7s256_reset.script

-#
-# Init - taken form the script openocd_at91sam7_ecr.script 
-#
-# I take this script from the following page:
-#
-# http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/openocd_intro/index.html
-#
-# disable watchdog
-mww 0xfffffd44 0x00008000
-# enable user reset
-mww 0xfffffd08 0xa5000001
-# CKGR_MOR : enable the main oscillator
-mww 0xfffffc20 0x00000601	
-sleep 10
-# CKGR_PLLR: 96.1097 MHz
-mww 0xfffffc2c 0x00481c0e 	
-sleep 10
-# PMC_MCKR : MCK = PLL / 2 ~= 48 MHz
-mww 0xfffffc30 0x00000007	
-sleep 10
-# MC_FMR: flash mode (FWS=1,FMCN=60)
-mww 0xffffff60 0x003c0100	
-sleep 100

src/target/target/sam7s256.cfg

-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config srst_only srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little 0 arm7tdmi
-
-
-target_script 0 reset event/sam7s256_reset.script
-
-working_area 0 0x00200000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank at91sam7 0 0 0 0 0
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger