- Jun 17, 2009
-
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2261 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
- Jun 16, 2009
-
-
zwelch authored
Fix a bug preventing ICEpick "enable that TAP" code from working: the "runtest" command wrongly finished with a JTAG reset, discarding the work the TAP enable handler just finished! Instead, JTAG should stay in RUN/IDLE state. git-svn-id: svn://svn.berlios.de/openocd/trunk@2252 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Extend the internal JTAG event handlers to cover enable/disable, and use those events to make sure that targets get "examined" if they were disabled when the scan chain was first set up: - Remove "enum jtag_tap_event", merge with "enum jtag_event", so C code can now listen for TAP enable/disable events. - Report those events so they can trigger callbacks. - During startup, make target_examine() register a handler to catch ENABLE events for any then-disabled targets. This fixes bugs like "can't halt target after enabling its TAP". One class of unresolved bugs: if the target has an ETM hooked up to an ETB, nothing activates the ETB. But starting up the ETM without access to the ETB registers fails... git-svn-id: svn://svn.berlios.de/openocd/trunk@2251 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Tighten error handling on TAP enable/disable paths a bit: - Don't enable/disable unless it's necessary. Those event handlers could have nasty side effects... - Don't *succeed* enables/disables if there was no code which could have implemented that action. This prevents bugs like wrongly acting as if the scan chain changed. - Minor whitespace cleanup in enable/disable command code. The big problem is still the lack of code to verify scan chains were actually updated as requested; this adds a comment on that. I suspect the best we can do near term will be to verify IDCODE. git-svn-id: svn://svn.berlios.de/openocd/trunk@2250 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Fix bug in a warning. It warned about "huge IRlength" for an older JRC with a two bit instruction register ... wrong! git-svn-id: svn://svn.berlios.de/openocd/trunk@2249 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Doc update: say "jtag newtap ... -disable" records the state after exiting the RESET state, matching the only implementation we're working with so far (TI ICEpick-C). Matching code updates. Now we can be sure that the "enabled" flag value is correct after JTAG resets. git-svn-id: svn://svn.berlios.de/openocd/trunk@2246 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Fix a memory leak in jtag_tap_free(): unregister the event callback too. Also fix the associated conceptual bug in unregistering JTAG event callbacks: since the same callback procedure is used many times with different callback data (a TAP handle), that data must be considered when unregistering any callback. This could fix some crashes after TAP registration errors, by making sure the reset event handler doesn't scribble over memory that's now used by something else. git-svn-id: svn://svn.berlios.de/openocd/trunk@2245 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Minor jtag cleanup: - remove hidden assumption about JTAG event numbering - move function declarations to a header - some end'o'line whitespace - use "calloc" not "malloc + memset" git-svn-id: svn://svn.berlios.de/openocd/trunk@2244 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
- Jun 12, 2009
-
-
zwelch authored
Currently the "debug_level 3" command tracing ignores commands that could return values to TCL scripts (by plugging in to a slightly lower level of the interpreter stack). Fix that by abstracting the tracing command and starting to make some of those previously-untraced commands use this new mechanism. git-svn-id: svn://svn.berlios.de/openocd/trunk@2224 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Partial fix to the "long IR length" problems. - Current code could handle up to 32 bit IR lengths with full functionality, if it didn't just reject may of them out of hand. So only reject clear errors, where the IR mask (or capture instruction) needs more than IrLen bits. - Longer IR lengths can only be handled in BYPASS mode for now. Example: TI's DSPs use 38-bit IR lengths. So we can't issue their IDCODE instructions... A more complete fix would be able to issue longer instructions; or minimally, would fail cleanly for the non-BYPASS case. Note that this *could* make some currently broken scripts fail, since the previous code accepted garbage values so long as they didn't use more than 16 bits. git-svn-id: svn://svn.berlios.de/openocd/trunk@2222 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Use the default KHz speed setting, in case interface is not initialized. git-svn-id: svn://svn.berlios.de/openocd/trunk@2218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Bug fix: Always clear high bit of USB bulk out endpoint. - Use parse_ulong helpers to ensure numeric strings are parsed properly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2217 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Use parse_uint helper to ensure argument is parsed properly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2216 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Bug fix: Return a syntax error when less than two arguments are given. - Bug fix: Use parse_u16 helper to ensure vales are parsed properly. - Simplify loop termination logic by ensuring argc is always even. - Move loop induction variable declaration to where it is used. git-svn-id: svn://svn.berlios.de/openocd/trunk@2215 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Use parse_u32 helper to ensure scan values are parsed properly. - Clear the fields buffer to ensure partial cleanup occur correctly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2214 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2213 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2212 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Show the port number to the user when asking for it or setting it. - Print an error if the parport_port has already been set. - Use parse_u16 helper to ensure the parport_port string parses correctly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2211 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Show the port number to the user when asking for it or setting it. - Print an error if the amt_jtagaccel_port has already been set. - Use parse_u16 helper to ensure amt_jtagaccel_port string parses correctly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Show the port number to the user when asking for it or setting it. - Print an error if the parport_port has already been set. - Use parse_u16 helper to ensure the parport_port string parses correctly. git-svn-id: svn://svn.berlios.de/openocd/trunk@2209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
- Jun 11, 2009
-
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2189 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Add some quick Doxygen comments for these routines. git-svn-id: svn://svn.berlios.de/openocd/trunk@2188 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
Remove unused reset_line_mode enumerated type. git-svn-id: svn://svn.berlios.de/openocd/trunk@2187 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2186 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2185 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2184 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
- Jun 10, 2009
-
-
oharboe authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
- Jun 09, 2009
-
-
zwelch authored
- Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER symbols. - Enabled when either libftdi or FTD2xx driver should be built. - Eliminates redundant DRIVERSFILE assignment in JTAG automake input. git-svn-id: svn://svn.berlios.de/openocd/trunk@2177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Consolidate all individual driver variables into DRIVERFILES. - Eliminates all empty 'else' conditional clauses. - Move minidriver files to top of file. - Use MINIDRIVER conditional to build only driver(s) that will be linked. - Eliminate superfluous whitespace. git-svn-id: svn://svn.berlios.de/openocd/trunk@2176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2175 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Add new jtag_config_khz to increase encapsulation of jtag->khz call. - Add new jtag_get_speed_readable to encapsulate of jtag->speed_div call. - Make definition of jtag static in core.c, remove extern from tcl.c. git-svn-id: svn://svn.berlios.de/openocd/trunk@2171 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Move jtag_event_callbacks struct to core.c; it's an implementation detail. - Move jtag_*_event_callbacks next to the definition of the new function type. git-svn-id: svn://svn.berlios.de/openocd/trunk@2169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Define the function signature used by the JTAG event callback mechanism. - Provide Doxygen block for new type, including TODO for its return value. git-svn-id: svn://svn.berlios.de/openocd/trunk@2168 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2167 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Move nvp_jtag_tap_event and jtag_tap_handle_event to tcl.c. - Change both to be static; remove declaration of function from jtag.h. git-svn-id: svn://svn.berlios.de/openocd/trunk@2166 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2165 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Add accessors for setting the jtag_verify_capture_ir flag. - Use them in handle_verify_ircapture_cpmmand - Change variable type to bool; make it static. git-svn-id: svn://svn.berlios.de/openocd/trunk@2164 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
git-svn-id: svn://svn.berlios.de/openocd/trunk@2163 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-
zwelch authored
- Makes jtag_error static, add new get helper function for completeness. - Improve and add documentation and style for these helpers. git-svn-id: svn://svn.berlios.de/openocd/trunk@2162 b42882b7-edfa-0310-969c-e2dbd0fdcd60
-