Just use "%p" instead of consing up some integral type for pointer printf.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Based on some patches from <redirect.slash.nil@gmail.com>
for preliminary Win64 compilation.  More such updates are
needed, but they need work.  Compile tested on 64 and 32 bit
Linuxes, and Cygwin.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

This makes the documentation a closer match to "help" output:

 - "pathmove" somehow was not documented in the User's Guide

 - "jtag_nsrst_assert_width" and "jtag_ntrst_assert_width"
   are new; both needed descriptions.

 - Removed two undocumented and fairly useless script mechanisms:
    * production/production_info/production_test ... using it,
      requires replacing everything; so having it adds no value.
    * cpu ... way out of date; hopeless to keep that current

Note that anyone using that "production" stuff already defines
their own procedures, and can keep using them with no change.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Ofrwarded from Ron, who's not subscribed.

----- Forwarded message from Ron <ron@debian.org> -----

From: Ron <ron@debian.org>
Date: Wed, 14 Oct 2009 04:50:17 +1030
To: wookey@debian.org
Subject: [PATCH] OpenRD board configuration
X-Spam-Status: No, score=-3.6 required=4.5 tests=BAYES_00,RCVD_IN_DNSWL_LOW
	autolearn=ham version=3.2.5

This piggybacks on the 'sheevaplug' layout which uses the same Kirkwood SoC.

Signed-off-by: Ron Lee <ron@debian.org>

Remove ircapture/mask attributes.  Add "srst_nogate".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

The LE check is obviously buggy (as easily triggered during some
testing), but I didn't audit the rest of the cases.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Cleanup comments and layout/whitespace in the TMS tables.
Table contents stayed the same (ignoring whitespace).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>

Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>

Resolve a "FIX" comment; yes that was superfluous given that the
JTAG core does that check by default.  It was also buggy since it
wrote to a stack frame that went away before the write happened!!

Other fixes:  remove pointless malloc(); zero-init scan_field_t
values wherever they appear; whitespace scrub; spelling fix.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

arm11 burst writes are now only enabled for writes larger than 1 word. Single word writes are frequently used from reset init scripts to non-memory peripherals.

Retire arm11 no_increment. Intended for future expansion to read/write to ports. New arm11 commands would have to be added to exploit it.

Fix bogus 'transfer errors' with arm11 'memwrite burst enable'. A regression introduced in b8103660fa36a77158bd77379572c09913d85c00

Load the XScale debug handler from the read-only data section
instead of from a separate file that can get lost or garbaged.
This eliminates installation and versioning issues, and also
speeds up reset handling a bit.

Plus some minor bits of cleanup related to loading that handler:
comments about just what this handler does, and check fault codes
while writing it into the mini-icache.

The only behavioral changes should be cleaner failure modes after
errors during handler loading, and being a bit faster.

NOTE:  presumes GNU assembly syntax, with ".incbin"; and ELF,
because of the syntax of the ".size" directive.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Streamline/shrink some needless JTAG stuff:

 - Use #defines for the JTAG instructions; they can't ever change
 - Remove an unused (!) shadow of tap->ir_length
 - Stop using a copy of target->tap
 - Don't bother saving the variant after sanity checking ir_length

Also, make target_create() work as on other targets:  build the
register cache later, making init_target() no longer be a NOP.
Handle malloc failure; remove a comment that was obsoleted by the
not-so-new target syntax.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Supply default reset_config statement to make target scripts useful standalone and provide sensible default

Remove unused and deprecated (in the arch spec) mode for loading
code into the *main* icache (vs the "mini" icache).  Disable some
extremely noisy (and rarely useful) low-level debug messages

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Declare almost everything as static.
Move stuff to remove most forward references.
Remove most forward declarations.
Warn if the unimplemented register functions get called.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Just fill out the rest of the cache line with NOPs; don't change
the record of how much data we consumed.  Otherwise the count of
how much data is left can roll over from positive to negative
("VERY positive") and skip the loop termination of zero.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Add a header comment referencing useful XScale specs.
Make most data static, and the tables readonly.
Scrub extra blank lines.
Return fault codes from one routine.
Remove a needless NOP methood.

(BUGFIX) When we update R0, mark R0 as dirty/valid ... not R15/PC!

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Observed on a Cygwin build.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>