- Add a header comment
 - Line up the ETM context struct, pack it a bit
 - Remove unused context_id (this doesn't support ETMv2 yet)
 - Make most functions static
 - Remove unused string table and other needless lines of code
 - Correct "tracemode" helptext

Also provide and use an etm_reg_lookup() to find entries in the ETM
register cache.  This will help cope with corrected contents of that
cache, which doesn't include entires for non-existent registers.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2750 b42882b7-edfa-0310-969c-e2dbd0fdcd60

didn't turn up earlier. Is everyone still using gcc 3.x? Or is the x86
version of gcc 4.x much more relaxed?

git-svn-id: svn://svn.berlios.de/openocd/trunk@2749 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2748 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2747 b42882b7-edfa-0310-969c-e2dbd0fdcd60

of a (NOR) flash chip: allow passing "last" as an alias
for the number of the last sector.

Improve several aspects of error checking while we're at it.

From: Johnny Halfmoon <jhalfmoon@milksnot.com>


git-svn-id: svn://svn.berlios.de/openocd/trunk@2746 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Highlight that the "post-reset" event kicks in before the
scan chain is validated, which limits what can be done
in a post-reset handler.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2745 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2744 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60

files; omitted src/httpd


git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60

It can be sped up later, once it's known the PLLs are active.

Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60

garbage after the expected data (from the TAPs' BYPASS or IDCODE
registers).

NOTE that there was previously some code that looked like it was
trying to do this ... which didn't work, because it was looping
over the list of expected TAPs, and never checked *after* that
list completed!  That could hide some *nasty* reset issues...

Also replace a now-obsolete scanchain length test with one that
behaves correctly; and update reporting of unexpected IDCODEs.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2739 b42882b7-edfa-0310-969c-e2dbd0fdcd60

This patch modifies an error message which, in its original state,
I find somewhat unhelpful. So a small hint was added.

Signed-off-by: Johnny Halfmoon <jhalfmoon at milksnot.com>


git-svn-id: svn://svn.berlios.de/openocd/trunk@2738 b42882b7-edfa-0310-969c-e2dbd0fdcd60

done on exit from the config stage, how JTAG clocking issues can
trigger errors there, and how to avoid such problems.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2737 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - Shrink messaging during resets, primarily by getting rid of
   "nothing happened" noise that hides *useful* information.

 - Improve: the "no IDCODE" message by identifying which tap only
   supports BYPASS; and the TAP event strings.

Related minor code updates:

 - Remove two needless tests when examining the chain:  we know
   we have a TAP, and that all TAPs have names.

 - Clean up two loops, turning "while"s into "for"s which better
   show what's actually being done.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60

for disabling TAPs.  We don't actually know how to make any
JRCs which do that yet; but when we do, this will matter.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2735 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2734 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2733 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Indentation, whitespace, line lengths.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2731 b42882b7-edfa-0310-969c-e2dbd0fdcd60

and Tcl/external):

 - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with
   ICEpick ... first C code flags TAPs that got disabled, then call
   any Tcl code that might want to re-enable them.

 - Always call the C/internal handlers when JTAG operations can be
   issued; previously that wasn't done when TRST was used. 

Plus some small cleanups (whitespace, strings, better messaging
during debug and on some errors) to reset-related code.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2730 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2729 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2727 b42882b7-edfa-0310-969c-e2dbd0fdcd60

the various steps, but also calling [target names] only once.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2726 b42882b7-edfa-0310-969c-e2dbd0fdcd60

avoid a duplicate test.

Plus other cleanup in the same code: be "static", sane line lengths
for source and diagnostics, and fix misleading variable names.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2725 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Erase logic:
 - command invocation
    + treat "nand erase N" (no offset/length) as "erase whole chip N"
    + catch a few more bogus parameter cases, like length == 0 (sigh)
 - nand_erase() should be static
 - on error
    + say which block failed, and if it was a bad block
    + don't give up after the first error; try to erase the rest
 - on success, say which nand device was erased (name isn't unique)

Device list ("nand list"):
 - say how many blocks there are
 - split summary into two lines
 - give example in the docs

Doc tweaks:
 - Use @option{...} for DaVinci's supported hardware ECC options

For the record, I've observed that _sometimes_ erasing bad blocks causes
failure reports, and that manufacturer bad block markers aren't always
erasable (even when erasing their blocks doesn't trigger an error report).


git-svn-id: svn://svn.berlios.de/openocd/trunk@2724 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2723 b42882b7-edfa-0310-969c-e2dbd0fdcd60

michal smulski <michal.smulski@ooma.com> fix regression in jtag_add_pathmove() which broke arm11 in r1825. Other uses of jtag_add_pathmove are svn + xsvf + xscale...

git-svn-id: svn://svn.berlios.de/openocd/trunk@2722 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2721 b42882b7-edfa-0310-969c-e2dbd0fdcd60

srst_gates_jtag option. at91sam9260 needs retesting, and possibly srst_gates_jtag added to reset_config. Could i.MX27 be a case where srst does not pull trst, but really srst gates jtag clock?

git-svn-id: svn://svn.berlios.de/openocd/trunk@2720 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - update comments to say so.
 - update docs to clarify that the "arm9tdmi" command prefix
   is a misnomer.
 - bugfix some messages that wrongly assume only ARM9TDMI
   based processors use this code.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2719 b42882b7-edfa-0310-969c-e2dbd0fdcd60

JTAG clocking by gating the core clock, and workarounds.
Most details are with the "halt" command, which is one
of the first places this issue will be noticed.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2718 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2717 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2716 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2714 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2713 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2712 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2711 b42882b7-edfa-0310-969c-e2dbd0fdcd60