git-svn-id: svn://svn.berlios.de/openocd/trunk@2135 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Add configuration for an old AT91rm9200 board, the Cogent CSB 337.
Worth noting from the OpenOCD perspective:

 - It got a real hardware trace port connector; wired up here as
   much as we can, lacking inexpensive trace-aware dongles.

 - This is the first in-tree use of the "arm920t cp15" command.
   It adjusts the CPU clocking and enables i-cache, which gives
   more than 4x speedup after booting Linux; it's visible even
   just running U-Boot.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2134 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2075 b42882b7-edfa-0310-969c-e2dbd0fdcd60

This is the missing half of the r1974 patch:
OSK5912 board support, which was split out from
the omap5912 target config.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1985 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:

 - Fix syntax error ("-irlen" not "irlen")
 - Provide real TAP ids for the ARM926ejs and the C55x dsp
 - Label both CPUs appropriately (DSP, ARM)
 - List both flash chips

The scan chain looks like this (note truncated DSP instruction code):

      TapName            | Enabled |   IdCode      Expected    IrLen IrCap  IrMask Instr
 ---|--------------------|---------|------------|------------|------|------|------|---------
  0 | omap5912.dsp       |    Y    | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff
  1 | omap5912.arm       |    Y    | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c
  2 | omap5912.unknown   |    Y    | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff

I still don't know what that third TAP is; maybe an early version of
an ICEpick JTAG router.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1974 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1925 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1919 b42882b7-edfa-0310-969c-e2dbd0fdcd60