NAND support for DaVinci-family drivers, with HW ECC support.
Declare the NAND chip on the DM355 EVM board.

Currently tested on DM355 for Linux interop using the standard
large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4"
work fine.  (Using hwecc4 relies on patches that haven't quite
made it through the Linux-MTD bottlenecks yet.)

Not yet tested:  1-bit on small-page (although it's hard to see
how that could fail); 4-bit on small page (picky layout issues);
the "hwecc_infix" mode (primarily for older boot ROMs; testing
there is blocked on having new bootloader code).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1903 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Fix minor issues with xrefs not liking parentheses around them.
- Change 'Building' section to 'Building OpenOCD'.  It reads better.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1902 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- move Doxyfile to Doxyfile.in: type 'make Doxyfile' to recreate it
- create Doxyfile from Doxyfile.in with make rule:
  - use sed substitution of $(srcdir) to location directories
- delete all doxygen created files with 'make distclean'
- include all required files (including logger.pl) in distribution


git-svn-id: svn://svn.berlios.de/openocd/trunk@1901 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Changes svf_check_tdo function (checks tdo output matches desired values):
- call buf_cmp_mask function to do comparison instead of using a loop.
- fixes a bug when data length is equal to sizeof(int).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1900 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- add reset delay settings for LPC2103, LPC2124, and LPC2129.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1899 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1898 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Rewrite copy to give a better introduction and overview.
- Add subpages: The List, Style Guide, Patch Policies, and Bug Reporting.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1897 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1896 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Remove style guide from user guide; moved to doxygen manual.
- Replace with improved introduction for developers and packagers.
- Move introductory paragraph about the project under the About page.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1895 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1894 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Remove FTDI driver tap_set_state call; performed by jtag_add_reset.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1893 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Add jtag_execute_queue in jtag_add_reset after interface_jtag_add_reset.
- Use tap_set_state to demark TAP_RESET, instead of cmd_queue_cur_state
  - cmd_queue_cur_state needs to be retired.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1892 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1891 b42882b7-edfa-0310-969c-e2dbd0fdcd60

flash driver because of the new at91sam7 version.

git-svn-id: svn://svn.berlios.de/openocd/trunk@1890 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Updates to the J-Link interface driver to support more device versions:
- Add capability detection:
  - if capable, detect protocol version; otherwise, assume v2 protocol.
  - if capable, detect buffer size; otherwise, assume minimal.
- Disable command result queries for devices using v2 protocol.
- Defined and use JTAG2 command with v2 protocol; JTAG3 is v3 protocol.
- Add TCL command to allow explicit setting of J-Link protocol version.

With approval, I revised the patch to make the following changes:
- add static keywords to new jlink-specific variables
- factor calculation of major_version to be more readable
- remove braces around simple one-line statements in if/else clauses
- remove (rather than #if 0) duplicate reset code; it is in SVN
- use &function to be clearer when passing function pointers
- add symbols for EMU_CMD_GET_CAPS bits; do not hard-code constants!
- almost renamed jlink_handle_jlink_hw_jtag_command  (seriously?!?!)
  - rewrote that function using a switch statement.
  - made version request processing easier to understand and modify
- improve alternate endpoint detection:
  - make code easier to read by using temporary variables
  - eliminate extra level of indentation and redundant logging
- use ternary conditional to select JTAG2 or JTAG3 command
- reverse version test in jlink_usb_message to reduce indentation
  - this had the biggest effect in cleaning up this patch
- use C99's ability to declare new/changed variables with less scope
- add spaces around binary operators in new/changed code
- revert other superfluous whitespace/comment style changes


git-svn-id: svn://svn.berlios.de/openocd/trunk@1889 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1888 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1887 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Fix multi-byte reads on x16 devices used as x8


git-svn-id: svn://svn.berlios.de/openocd/trunk@1886 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Fix calculation of flash_address for x16 devices used as x8


git-svn-id: svn://svn.berlios.de/openocd/trunk@1885 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Consistently use flash_address


git-svn-id: svn://svn.berlios.de/openocd/trunk@1884 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Remove un-implemented and dubious "nand copy" command.

Doing this efficiently would mean doing the copying on
the target CPU, instead of back and forth through JTAG.
If anyone ever needs this functionality, that's what
they should implement.

Also, update on-line "help" for "nand dump" to display
its two optional flags; and for "nand write" to display
a recently added flag.



git-svn-id: svn://svn.berlios.de/openocd/trunk@1883 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- printf conversion fixes for variably-sized types


git-svn-id: svn://svn.berlios.de/openocd/trunk@1882 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Improve support for the DM355 EVM board, and eventually other boards based
on DaVinci chips:

 - Provide generic "davinci.cfg" to hold utilities that can be reused by
   different chips in this family.  Start with PINMUX, PSC, and PLL setup.

 - DM355 chip support updates:  provide a dictionary with chip-specific
   symbols, load those utilities.

 - Create a new dm355evm board file, with a reset-init event handler
   which uses those utilities to set up PLLs and clocks, configure the
   pins, and improve the JTAG speed limit.

Also a minor tweak:  provide a virtual address for the work area, matching
what the very latest kernels do.  It's probably unwise to use OpenOCD while
the MMU is active though.

The DRAM isn't yet accessible, but NAND access is mostly ready.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1881 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Add doxygen comments in arm7_9_common source and header files.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1880 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Add a "NAND Commands" section to to the TEXI docs, covering the basic
commands except for those previously discussed as being due for removal
("nand copy") or switching to use byte offsets not block numbers.

This uses the "@deffn..." syntax for defining commands, as somewhat
suggested by the TEXI documentation, and adds a new "Command Index".
We might prefer to merge those indexes for the near term, but I think
the "@deffn" approch is probably worth switching to.

Updates a few other bits to clarify that "flash" doesn't just mean NOR.  
And to fix one niggling falsity:  the "reset-init" event *is* used, and
in fact it's quite important.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1879 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1878 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1877 b42882b7-edfa-0310-969c-e2dbd0fdcd60

    -jtag.c, interface_jtag_add_ir_scan() [2/2] (version without goto):
    	- change 'found' to bool
    	- add comments on loops



git-svn-id: svn://svn.berlios.de/openocd/trunk@1876 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1875 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1874 b42882b7-edfa-0310-969c-e2dbd0fdcd60

the key command_*() helper functions, fixng the bugs that turned up.

Several of these bugs were from misuse of PRIi64; that's for 64-bit
integers, NOT for "long long" or "u64" (which work best with %lld).


git-svn-id: svn://svn.berlios.de/openocd/trunk@1873 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Update PATCHES to better describe the policies in place


git-svn-id: svn://svn.berlios.de/openocd/trunk@1872 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Increase DTC status retry count to avoid problems with STM Primer


git-svn-id: svn://svn.berlios.de/openocd/trunk@1871 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	- Allow target_read/write_buffer of size 0


git-svn-id: svn://svn.berlios.de/openocd/trunk@1870 b42882b7-edfa-0310-969c-e2dbd0fdcd60

	-Prevent freezing of target when doing a 'shutdown'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1869 b42882b7-edfa-0310-969c-e2dbd0fdcd60

    -jtag.c, interface_jtag_add_ir_scan() [1/2]:
    	- remove temporary scan_size and use tap->ir_length instead
    	- slight loop restructuring to reduce indentation level




git-svn-id: svn://svn.berlios.de/openocd/trunk@1868 b42882b7-edfa-0310-969c-e2dbd0fdcd60

   -jtag.c, interface_jtag_add_dr_out():
        - use pointer 'field' instead of scan->fields[field_count]
        - restructure the main loop to clearly separate the two cases: TAP is not bypassed / TAP is bypassed
          (this is to keep the function similar to interface_jtag_add_dr_scan())
        - fix bug where only the first output field has its tap field set
        - add asserts to verify that target_tap points to the one not bypassed TAP



git-svn-id: svn://svn.berlios.de/openocd/trunk@1867 b42882b7-edfa-0310-969c-e2dbd0fdcd60

    -jtag.c, interface_jtag_add_dr_scan():
            - use pointer 'field' instead of scan->fields[field_count]
            - restructure the main loop to clearly separate the two cases: TAP is not bypassed / TAP is bypassed
            - add an assert that each non-bypassed TAP receives at least one field
            - add an assert that checks that no superfluous input fields were passed



git-svn-id: svn://svn.berlios.de/openocd/trunk@1866 b42882b7-edfa-0310-969c-e2dbd0fdcd60

    -jtag.c, interface_jtag_add_ir_scan():
        - use pointer 'field' instead of scan->fields[nth_tap]
        - add assertion to ensure that input data has correct size for TAP's IR



git-svn-id: svn://svn.berlios.de/openocd/trunk@1865 b42882b7-edfa-0310-969c-e2dbd0fdcd60

    - jtag.c: consolidate output scan field initialization in scan functions
    - jtag.c: add cmd_queue_scan_field_clone() to handle 1:1 field copies
    - jtag.c: fix bug where only the first output field in a dr scan has its tap field set



git-svn-id: svn://svn.berlios.de/openocd/trunk@1864 b42882b7-edfa-0310-969c-e2dbd0fdcd60