- use 'etm trigger_percent' setting when programming ETB trigger count
- fixed some small bugs in ETM trace analysis
- fixed minor bug in flash writing (thanks to Pavel Chromy)


git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@196 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@195 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to 
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets



git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@193 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@192 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- add replacements.h to log.h to make sure ERROR is undefined on windows


git-svn-id: svn://svn.berlios.de/openocd/trunk@191 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST 29F400B non-cfi flashes



git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@189 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed broken OpenOCD version string



git-svn-id: svn://svn.berlios.de/openocd/trunk@188 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- add usbprog example config file
- update version string


git-svn-id: svn://svn.berlios.de/openocd/trunk@187 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- increase memory pseudo-image cache size to 1024 byte for improved trace analysis performance
- added OpenOCD+trace as an ETM capture driver example implementation
- new usbprog driver (thanks to Benedikt Sauter)


git-svn-id: svn://svn.berlios.de/openocd/trunk@186 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added checksum support to intel hex file loader
- elf file loader now ignores any bss sections
- mingw build now always opens files in binary mode

git-svn-id: svn://svn.berlios.de/openocd/trunk@185 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added prepare_reset_halt handler for cortex_m3

git-svn-id: svn://svn.berlios.de/openocd/trunk@184 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@183 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- bootstrapping changes to accomodate packaging (thanks to Uwe Hermann)


git-svn-id: svn://svn.berlios.de/openocd/trunk@182 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin)
- retry JTAG chain validation (thanks to Magnus Lundin)
- reworked GDB packet input handling (thanks to Pavel Chromy)
- output error message when setting a watchpoint failed
- removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy)


git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible)
- added support for usbprog (thanks to Benedikt Sauter)
- make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy)
- register at_exit handler to do necessary unregistering (thanks to Pavel Chromy)
- added dummy ETM capture driver to allow ETM to be registered without a capture driver


git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added declarations for 32bit fileio access functions (network byte order)
- fixed bug in etm trace dump file handling
- added XScale trace buffer decoding
- fixed arm_simulator ERROR numbers (-7xx used twice)
- fixed minor bug in debug output in stellaris.c


git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)

git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging)
- cleaned up errror handlers. only use when there's a catchable error
- fix segfault when etm was configured without a valid driver



git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@175 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock
- inttypes.h now used for long long printf style declarations

git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for pseudo image type "mem", currently only used for etm analysis: "etm image <target#> <dummy base address> mem"



git-svn-id: svn://svn.berlios.de/openocd/trunk@173 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Added support for NVGM bit 2 for AT91SAM7XC128/256 

git-svn-id: svn://svn.berlios.de/openocd/trunk@172 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@171 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)



git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@161 b42882b7-edfa-0310-969c-e2dbd0fdcd60

This checkin is still experimental, not recommended for general use



git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@157 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@156 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use


git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60

-- changed arm966e to use standard arm9_7 reset handling

git-svn-id: svn://svn.berlios.de/openocd/trunk@146 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs)


git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@144 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- use BKPT instruction on cores supporting it (ARM926EJ-S, ARM966E-S)
- correctly handle endianness of software breakpoint instruction


git-svn-id: svn://svn.berlios.de/openocd/trunk@143 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations
- added "arm7_9 dump_etb" command


git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target
- arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset


git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- allow multiple USB vendor and product ids when searching for connected FT2232 based JTAG interfaces (thanks to Werner Almesberger for this patch)


git-svn-id: svn://svn.berlios.de/openocd/trunk@140 b42882b7-edfa-0310-969c-e2dbd0fdcd60