git-svn-id: svn://svn.berlios.de/openocd/trunk@1978 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Uplevel the arch commands to be a chapter; they really
don't fit in the "general commands" category.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1977 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Fix minor goofage in previous doc updates:

 * The ETM dummy driver name is "dummy" not "etm_dummy";
   re-alphabetize.

 * DCC trace message mode "charmsg" is a format type
   (and what Linux needs)


git-svn-id: svn://svn.berlios.de/openocd/trunk@1976 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Various updates, mostly small/formatting changes:

 * Small content tweaks:
    - Re-title:  "OpenOCD User's Guide".
    - For users, URLS for latest doc and SparkFun forum
    - Mention GIT-SVN
 * Fix some front-matter goofage, matching texinfo docs:
    - "paragraphintent" location matters
    - put release version/date description with the copyright
 * Fix some other stuff matching texinfo docs:
    - no tabs
    - tweak some refs and anchors
 * whitespace-at-end-o-line fixes


git-svn-id: svn://svn.berlios.de/openocd/trunk@1975 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:

 - Fix syntax error ("-irlen" not "irlen")
 - Provide real TAP ids for the ARM926ejs and the C55x dsp
 - Label both CPUs appropriately (DSP, ARM)
 - List both flash chips

The scan chain looks like this (note truncated DSP instruction code):

      TapName            | Enabled |   IdCode      Expected    IrLen IrCap  IrMask Instr
 ---|--------------------|---------|------------|------------|------|------|------|---------
  0 | omap5912.dsp       |    Y    | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff
  1 | omap5912.arm       |    Y    | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c
  2 | omap5912.unknown   |    Y    | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff

I still don't know what that third TAP is; maybe an early version of
an ICEpick JTAG router.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1974 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Whitespace fixes.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1973 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Remove broken whitespace ... mostly at end of line, but
also in some cases blocks of inappropriate empty lines.

And spell "comamnd" right. :)


git-svn-id: svn://svn.berlios.de/openocd/trunk@1972 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1971 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide


git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1969 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->examine.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1968 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->{add,remove}_{break,watch}point.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1967 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all accesses to target->type->name.
- add documentation in target_s to warn not to access field directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1966 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->step.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1965 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->get_gdb_reg_list.
- add documentation in target_s to warn not to invoke callback directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1964 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->bulk_write_memory.
- add documentation in target_s to warn not to invoke callback directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1963 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1962 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->run_algorithm.
- add documentation in target_s to warn not to invoke callback directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1961 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->write_memory.
- add documentation in target_s to warn not to invoke callback directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1960 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- replaces all calls to target->type->read_memory.
- add documentation in target_s to warn not to invoke callback directly.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1959 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - fix buffer overrun in mdw; final '\0' would overflow the output buffer.
 - return ERROR_COMMAND_SYNTAX_ERROR instead of ERROR_OK if:
   - less than one argument is provided
   - the command is called with a name other than mdb, mdh, or mdw.
 - factor all command output into new handle_md_output function


git-svn-id: svn://svn.berlios.de/openocd/trunk@1958 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1957 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1956 b42882b7-edfa-0310-969c-e2dbd0fdcd60

The debugging code in jlink_tap_execute() called when _DEBUG_USB_COMMS_ is 
defined was using the entire cached scan length to print the results 
buffers, and not the correct length of each individual buffer.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1955 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1954 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- wordsize will always be 1, 2, or 4 due to preceeding switch statement.
- move call to keep_alive after successful writes, not upon failures


git-svn-id: svn://svn.berlios.de/openocd/trunk@1953 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Add jtag_interface_quit, factored from exit_handler() in openocd.c.
- Remove its extern declaration.
- Add static keyword to its definition.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1952 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1951 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1950 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1949 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1948 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1947 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1946 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Provide basic documentation on the ARM ETM and ETB trace commands.

Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code.  (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)

Note that I'm still not sure whether the ETM support works.  But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.

ZW: whitespace changes were split out of this patch but will follow.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1945 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Make it so the magic "reset_config" keywords can be provided in any
order.  This eliminates needless error paths, and makes it easier
to define things at the right level (adapter, board, target).
It also includes two other behavioral changes:

  (1)	When "handle_reset_config" sees a parameter error, it
  	exits without changing anything.   This is best viewed
	as a bugfix.  (Old behavior:  restore defaults, even if
	they weren't previously active.)

  (2)	Only the behaviors that were explicitly specified get
  	changed.  (Old behavior:  everything else gets reset to
	the "default".)  So for example you can now specify SRST
	drive requirements without saying anything about the
	three unrelated topics you previously had to specify.

That second one might cause confusion for any configs that end
up calling "reset_config" twice, so it will deserve to be called
out in the release notes.  (There were no such configurations in
the current OpenOCD source tree.)

Update docs accordingly.  Note that at least some versions of
the texi-to-html tools can't handle "@xref{with spaces}", but
those work properly in PDF and in the info files.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1944 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1943 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- provides low-level information about each flash API interface,
- gives driver authors some documentation about the driver interface,
- updated extensively from the original patch provided by Duane Ellis.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1942 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Provide basic documentation for some of the other flash drivers.

 avr ... looks incomplete, may work with one AVR8 microcontroller
 ecosflash ... can't find docs
 lpc288x ... an NXP part, driver seems lpc2888-specific
 ocl ... some arm7/arm9 thing, can't find docs
 pic32mx ... looks incomplete, for PIC32MX (MIPS 4K) devices
 tms470 ... for TI TMS470 parts

Still seems to be mostly arm7tdmi... several of these have no
users in the current tree.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1941 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@1940 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Start converting the architecture-specific commands to @deffn format,
reviewing against the code.

  * armv4_5 disassemble ... now documented; although Jazelle code
    is not handled

  * It's "armv4_5 core_state" not "core_mode"; although Jazelle state
    is not handled

  * arm7/9 "debug" commands ... now with other arm7_9 commands, no
    longer in a separate section

  * arm926ejs cp15 ... previous description was broken, it matched
    the code for arm920t instead

  * Have separate subsections for ARMv4/ARMv5, ARMv6, and ARMv7; the
    latter are new
    
  * Move core-specific descriptions into sub-subsections under those
    architectures; XScale and ARM11 descriptions are new

The new XScale and ARM11 command descriptions surely need elaboration
and review.  ARM CP15 operation descriptions in general seem to be
confused and incomplete.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1939 b42882b7-edfa-0310-969c-e2dbd0fdcd60