- added prepare_reset_halt handler for cortex_m3

git-svn-id: svn://svn.berlios.de/openocd/trunk@184 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin)
- retry JTAG chain validation (thanks to Magnus Lundin)
- reworked GDB packet input handling (thanks to Pavel Chromy)
- output error message when setting a watchpoint failed
- removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy)


git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and Asix for making this addition possible)
- added support for usbprog (thanks to Benedikt Sauter)
- make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy)
- register at_exit handler to do necessary unregistering (thanks to Pavel Chromy)
- added dummy ETM capture driver to allow ETM to be registered without a capture driver


git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added declarations for 32bit fileio access functions (network byte order)
- fixed bug in etm trace dump file handling
- added XScale trace buffer decoding
- fixed arm_simulator ERROR numbers (-7xx used twice)
- fixed minor bug in debug output in stellaris.c


git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)

git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging)
- cleaned up errror handlers. only use when there's a catchable error
- fix segfault when etm was configured without a valid driver



git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock
- inttypes.h now used for long long printf style declarations

git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for pseudo image type "mem", currently only used for etm analysis: "etm image <target#> <dummy base address> mem"



git-svn-id: svn://svn.berlios.de/openocd/trunk@173 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry
- added support for auto image type detection (thanks to Vincent Palatin)
- further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental)



git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@161 b42882b7-edfa-0310-969c-e2dbd0fdcd60

This checkin is still experimental, not recommended for general use



git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@157 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@156 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported)
- added XScale debug handler binary to repository
- added Thumb disassembling (thanks to Vincent Palatin for this patch)
- added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported)
This checkin is experimental, not suitable for general use


git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60

-- changed arm966e to use standard arm9_7 reset handling

git-svn-id: svn://svn.berlios.de/openocd/trunk@146 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs)


git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- use BKPT instruction on cores supporting it (ARM926EJ-S, ARM966E-S)
- correctly handle endianness of software breakpoint instruction


git-svn-id: svn://svn.berlios.de/openocd/trunk@143 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations
- added "arm7_9 dump_etb" command


git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target
- arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset


git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed arm926ej-s CP15 register access handling
- correctly identify SYSCLK source in LPC3180 NAND flash controller driver


git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- output all of EmbeddedICE version register in error message
- update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes
- added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot)
- enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware)


git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed description of arm9tdmi vector_catch command


git-svn-id: svn://svn.berlios.de/openocd/trunk@137 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added missing arm926ej-s cp15 patch (thanks Vincent Palatin)


git-svn-id: svn://svn.berlios.de/openocd/trunk@136 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c
- free working area and register stuff if str7x block write algorithm failed
- check PC after exiting a target algorithm in armv4_5.c


git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch)
- added support for accessing ETB (embedded trace buffer) registers


git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- reworked file i/o. every fileaccess (target, flash, nand, in future configuration, too) should now go through the fileio subsystem
- added support for reading IHEX files (through fileio)
- load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex']
- added NAND framework (preliminary)
- added support for the LPC3180 SLC and MLC NAND controllers (preliminary)
- fix initialization for parport
- gw16012 fixes/cleanups
- added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far)
- added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers


git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- add missing parentheses around macro parameters (thanks to Matthias Bauch for noticing this bug and providing a fix)


git-svn-id: svn://svn.berlios.de/openocd/trunk@130 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@128 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Added contributors to AUTHORS file
- Added link to Joern Kaipf's OOCD-Link


git-svn-id: svn://svn.berlios.de/openocd/trunk@126 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin)
- fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this)
- add support for reading JTAG device id (currently only as debug output on startup)
- cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number.
- small cleanups/fixes


git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands
- added lattice ISP cable (experimental)
- properly initialize parallel port (clear tristate bit)
- fixed jtag/Makefile.am that failed with some versions of autotools
- print error number if read() in gdbserver.c failed on Windows
- fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug)
- added support for AT91SAM7SE internal flash


git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for loading .bit files into Xilinx Virtex-II devices
- added support for the Gateworks GW16012 JTAG dongle
- merged CFI fixes from XScale branch
- a few minor fixes


git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- fixed breakpoint handling (this changes the target_t interface)


git-svn-id: svn://svn.berlios.de/openocd/trunk@113 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- several small fixes
- retry reading from a FT2232 device on incomplete reads


git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- added support for using Luminary Micro development board 'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin)


git-svn-id: svn://svn.berlios.de/openocd/trunk@106 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- correctly handle ft2232_device_desc and ft2232_serial when both are given at the same time


git-svn-id: svn://svn.berlios.de/openocd/trunk@104 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- allow FT2232 devices to be opened by serial number instead of device description ('ft2232_serial <serial>' command)
- redirect output from target event scripts (currently only reset) to the daemon output (INFO:)
- some minor fixes and enhancements


git-svn-id: svn://svn.berlios.de/openocd/trunk@103 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- str75x flash support (Thanks to Spencer Oliver)
- correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this)
- core-state (ARM/Thumb) can be switched by modifying CPSR
- fixed bug in gdb_server register handling
- register values > 32-bit should now be supported
- several minor fixes and enhancements



git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- set the T bit in the CPSR when the core was executing in Thumb state. Mask the T bit from the CPSR for all CPSR-writing operations


git-svn-id: svn://svn.berlios.de/openocd/trunk@97 b42882b7-edfa-0310-969c-e2dbd0fdcd60