git-svn-id: svn://svn.berlios.de/openocd/trunk@2488 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2483 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2477 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Updates to private TAP state tables in amtjtagaccel interface driver.

The first change is the neccesary one to correct a long-standing bug that
caused the IDCODE to be shifted by one bit too many.  This was caused by
an incorrect path from state RESET to state DRSHIFT.

The value of those 2 bytes were 0x8a and 0x04. This means that the
bitstream to do this transition is 0b 00100 01010 (send LSB first). This
will bring you from the reset state to the shift state; however, you
enter the shift-state twice, which explains why the ID-CODE that will be
read next will be shifted 1 bit.  The fix changes these to 0x05 and 0x00.
This will send the bitstream 0b 00101 (send LSB first).  This will bring
the TAP controller from the RESET state to the DRSHIFT state directly,
without entering the DRSHIFT state twice.

After checking the whole table, two other transitions were found that
could be optimized (5 bits in stead of 10 bits).

Summary off all changes:
  From   To       Old values  Old Bitstream  New values  New Bitstream  Remarks
  ----   -------  ----------  -------------  ----------  -------------  -------
  RESET  DRSHIFT  0x8a 0x04   0b00100 01010  0x05 0x00   0b00101        1,2
  IDLE   DRSHIFT  0x85 0x08   0b01000 00101  0x04 0x00   0b00100        2
  IDLE   IRSHIFT  0x8b 0x08   0b01000 01011  0x06 0x00   0b00110        2

[1] Fixes the IDCODE bug
[2] Optimization


git-svn-id: svn://svn.berlios.de/openocd/trunk@2472 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Fix intermittent J-Link interface startup failures:
- Use usb_reset to ensure selected dongle is in known good state.
- Assert emulator reset durning status check to prevent supurious failures.
- Eliminate status check loop; not needed due to other fixes.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2471 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2454 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2451 b42882b7-edfa-0310-969c-e2dbd0fdcd60

This patch adds support for the Luminary Micro LM3S9B90 target and
LM3S9B92 Evaluation Kit.  These kits include a new ft2232 adapter, the
Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a
new ft2232 layout called "luminary_icdi".


git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Add "jtag names" command, mirroring "target names" but returning
TAP names instead of target names.  This starts letting TAPs be
manipulated in scripts ... much like what works now for targets.

It's a bit limited just yet, since "jtag cget $TAPNAME" doesn't
expose all TAP attributes.  "$TARGETNAME cget" is more functional.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2428 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2424 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2422 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Warn when people (or scripts) use numeric identifiers for TAPs,
instead of dotted.name values.  We want this usage to go away,
so that for example adding more TAPs doesn't cause config scripts
to break because some sequence number changed.

It's been deprecated since late 2008, but putting a warning on
this should help us remove it (say, in June 2010) by helping to
phase out old (ab)usage in config scripts.

Other than in various config files, the only code expecting such
a number was the almost unused str9xpec driver.  This code was
changed to use the TAP it was passed, instead of making its own
dubious lookup and ignoring that TAP.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2415 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Adds new source files to encapsulate static/dynamic module handling.
- Further work should implement the jtag_interface_modules_load routine,
  to populate the jtag_interfaces list from shared libraries in a path.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2413 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2405 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\s*$' with ''.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2380 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2378 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '[ \t]*[)]' with ')'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2377 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '([ \t]*' with '('.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\([<>]\)(' with ') \1 ('.
- Replace ')\([<>]\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\([<>]\)(' with '\1 \2 ('.
- Replace '\(\w\)\([<>]\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2375 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\([|]\)(' with ') \1 ('.
- Replace ')\([|]\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\([|]\)(' with '\1 \2 ('.
- Replace '\(\w\)\([|]\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2374 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(+\)(' with ') \1 ('.
- Replace ')\(+\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(+\)(' with '\1 \2 ('.
- Replace '\(\w\)\(+\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2373 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(=\)(' with '\1 \2 ('.
- Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2372 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(==\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(<<\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(<<\)(' with '\1 \2 ('.
- Replace '\(\w\)\(<<\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2370 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(>>\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(>>\)(' with '\1 \2 ('.
- Replace '\(\w\)\(>>\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2369 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\(\w\)\(<=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2368 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(>=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(>=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2367 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(&&\)(' with ') \1 ('.
- Replace '\(\w\)\(&&\)(' with '\1 \2 ('.
- Replace '\(\w\)\(&&\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2366 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\(\w\)\([+]=\)(' with '\1 \2 ('.
- Replace '\(\w\)\([+]=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2364 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace ')\(!=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(!=\)(' with '\1 \2 ('.
- Replace '\(\w\)\(!=\)\(\w\)' with '\1 \2 \3'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2363 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2360 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2359 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2358 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2357 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2294 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2293 b42882b7-edfa-0310-969c-e2dbd0fdcd60

fix jtag_add_callback() args. The first argument is nothing special, it's just another generic argument.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2290 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2288 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\([^_]\)u32' with '\1uint32_t'.
- Replace '^u32' with 'uint32_t'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2281 b42882b7-edfa-0310-969c-e2dbd0fdcd60

- Replace '\([^_]\)u16' with '\1uint16_t'.
- Replace '^u16' with 'uint16_t'.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2277 b42882b7-edfa-0310-969c-e2dbd0fdcd60