Skip to content
Snippets Groups Projects
Select Git revision
  • esp32-nimble-wiki
  • rahix/hw-lock-new-mutex
  • master default protected
  • dx/somewhat-more-dynamic-config
  • schneider/sdk-0.2.1-7
  • schneider/bsec
  • dx/meh-bdf-to-stm
  • dx/flatten-config-module
  • genofire/ble-follow-py
  • schneider/ble-stability
  • schneider/ble-stability-new-phy
  • add_menu_vibration
  • plaetzchen/ios-workaround
  • blinkisync-as-preload
  • schneider/max30001-pycardium
  • schneider/max30001-epicaridum
  • schneider/max30001
  • schneider/stream-locks
  • schneider/fundamental-test
  • schneider/ble-buffers
  • v1.12
  • v1.11
  • v1.10
  • v1.9
  • v1.8
  • v1.7
  • v1.6
  • v1.5
  • v1.4
  • v1.3
  • v1.2
  • v1.1
  • v1.0
  • release-1
  • bootloader-v1
  • v0.0
36 results

stdlib.rst

Blame
  • Forked from card10 / firmware
    Source project has a limited visibility.
    • fgross's avatar
      c27f3fcc
      feat(pycardium): Enable framebuf module · c27f3fcc
      fgross authored and rahix's avatar rahix committed
      The framebuf module provides a framebuffer implementation running purely
      in MicroPython which will increase drawing performance by a lot.  A
      follow-up change will be necessary to connect this framebuffer
      implementation to the display API.
      
      This commit is implements a part of MR !211.
      c27f3fcc
      History
      feat(pycardium): Enable framebuf module
      fgross authored and rahix's avatar rahix committed
      The framebuf module provides a framebuffer implementation running purely
      in MicroPython which will increase drawing performance by a lot.  A
      follow-up change will be necessary to connect this framebuffer
      implementation to the display API.
      
      This commit is implements a part of MR !211.