Skip to content
Snippets Groups Projects
Commit 6d8c2e9e authored by moon2's avatar moon2 :speech_balloon:
Browse files

got display back

parent baafe38c
Branches
No related tags found
No related merge requests found
Show whitespace changes
Inline Side-by-side
components/badge23/espan.c
+ 1
− 1
View file @ 6d8c2e9e
......@@ -63,7 +63,7 @@ void os_app_main(void)
vTaskDelay(2000 / portTICK_PERIOD_MS);
set_global_vol_dB(0);
//display_init();
display_init();
while(1) {
manual_captouch_readout(1);
vTaskDelay((CAPTOUCH_POLLING_PERIOD) / portTICK_PERIOD_MS);
......
components/gc9a01/gc9a01.c
+ 39
− 39
View file @ 6d8c2e9e
......@@ -15,14 +15,14 @@
#include "sdkconfig.h"
#include "gc9a01.h"
#if (CONFIG_GC9A01_RESET_USED)
#define RESET_HIGH() gpio_set_level(CONFIG_GC9A01_PIN_NUM_RST,1)
#define RESET_LOW() gpio_set_level(CONFIG_GC9A01_PIN_NUM_RST,0)
#if (GC9A01_RESET_USED)
#define RESET_HIGH() gpio_set_level(GC9A01_PIN_NUM_RST,1)
#define RESET_LOW() gpio_set_level(GC9A01_PIN_NUM_RST,0)
#endif
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#define BLK_HIGH() gpio_set_level(CONFIG_GC9A01_PIN_NUM_BCKL,1)
#define BLK_LOW() gpio_set_level(CONFIG_GC9A01_PIN_NUM_BCKL,0)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#define BLK_HIGH() gpio_set_level(GC9A01_PIN_NUM_BCKL,1)
#define BLK_LOW() gpio_set_level(GC9A01_PIN_NUM_BCKL,0)
#endif
#define Cmd_SLPIN 0x10
......@@ -69,17 +69,17 @@
uint8_t GC9A01_X_Start = 0, GC9A01_Y_Start = 0;
#if (CONFIG_GC9A01_BUFFER_MODE)
#if (GC9A01_BUFFER_MODE)
DMA_ATTR uint16_t ScreenBuff[GC9A01_Height * GC9A01_Width];
#endif
//SPI Config
spi_device_handle_t spi;
spi_host_device_t LCD_HOST=CONFIG_GC9A01_SPI_HOST;
spi_host_device_t LCD_HOST=GC9A01_SPI_HOST;
//LEDC Config
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_MODE)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#if(GC9A01_CONTROL_BACK_LIGHT_MODE)
ledc_channel_config_t ledc_cConfig;
ledc_timer_config_t ledc_tConfig;
void LEDC_PWM_Duty_Set(uint8_t DutyP);
......@@ -151,7 +151,7 @@ static const lcd_init_cmd_t lcd_init_cmds[]={
static IRAM_ATTR void lcd_spi_pre_transfer_callback(spi_transaction_t *t)
{
int dc=(int)t->user;
gpio_set_level(CONFIG_GC9A01_PIN_NUM_DC, dc);
gpio_set_level(GC9A01_PIN_NUM_DC, dc);
}
/* Send a command to the LCD. Uses spi_device_polling_transmit, which waits
......@@ -223,7 +223,7 @@ uint16_t GC9A01_GetHeight() {
}
void GC9A01_HardReset(void) {
#if (CONFIG_GC9A01_RESET_USED)
#if (GC9A01_RESET_USED)
RESET_LOW();
delay_ms(10);
RESET_HIGH();
......@@ -346,8 +346,8 @@ static void MemAccessModeSet(uint8_t Rotation, uint8_t VertMirror,
void GC9A01_SetBL(uint8_t Value)
{
if (Value > 100) Value = 100;
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_MODE)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#if(GC9A01_CONTROL_BACK_LIGHT_MODE)
LEDC_PWM_Duty_Set(Value);
#else
if (Value) BLK_HIGH();
......@@ -357,7 +357,7 @@ void GC9A01_SetBL(uint8_t Value)
}
//Direct Mode
#if (!CONFIG_GC9A01_BUFFER_MODE)
#if (!GC9A01_BUFFER_MODE)
void GC9A01_RamWrite(uint16_t *pBuff, uint16_t Len)
{
......@@ -466,7 +466,7 @@ void GC9A01_SetBL(uint8_t Value)
static void gc9a01_GPIO_init(void)
{
gpio_config_t gpiocfg={
.pin_bit_mask= ((uint64_t)1UL<<CONFIG_GC9A01_PIN_NUM_DC),
.pin_bit_mask= ((uint64_t)1UL<<GC9A01_PIN_NUM_DC),
.mode=GPIO_MODE_OUTPUT,
.pull_up_en=GPIO_PULLUP_DISABLE,
.pull_down_en=GPIO_PULLDOWN_DISABLE,
......@@ -474,19 +474,19 @@ static void gc9a01_GPIO_init(void)
};
gpio_config(&gpiocfg);
gpio_set_level(CONFIG_GC9A01_PIN_NUM_DC,0);
gpio_set_level(GC9A01_PIN_NUM_DC,0);
#if(CONFIG_GC9A01_RESET_USED)
gpiocfg.pin_bit_mask|=((uint64_t)1UL<<CONFIG_GC9A01_PIN_NUM_RST);
#if(GC9A01_RESET_USED)
gpiocfg.pin_bit_mask|=((uint64_t)1UL<<GC9A01_PIN_NUM_RST);
gpio_config(&gpiocfg);
gpio_set_level(CONFIG_GC9A01_PIN_NUM_RST,1);
gpio_set_level(GC9A01_PIN_NUM_RST,1);
#endif
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(!CONFIG_GC9A01_CONTROL_BACK_LIGHT_MODE)
gpiocfg.pin_bit_mask|=((uint64_t)1UL<<CONFIG_GC9A01_PIN_NUM_BCKL);
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#if(!GC9A01_CONTROL_BACK_LIGHT_MODE)
gpiocfg.pin_bit_mask|=((uint64_t)1UL<<GC9A01_PIN_NUM_BCKL);
gpio_config(&gpiocfg);
gpio_set_level(CONFIG_GC9A01_PIN_NUM_BCKL,0);
gpio_set_level(GC9A01_PIN_NUM_BCKL,0);
#endif
#endif
......@@ -496,17 +496,17 @@ void gc9a01_SPI_init(void)
{
esp_err_t ret;
spi_bus_config_t buscfg={
.mosi_io_num=CONFIG_GC9A01_PIN_NUM_MOSI,
.mosi_io_num=GC9A01_PIN_NUM_MOSI,
.miso_io_num=GPIO_NUM_NC,
.sclk_io_num=CONFIG_GC9A01_PIN_NUM_SCK,
.sclk_io_num=GC9A01_PIN_NUM_SCK,
.quadwp_io_num=-1,
.quadhd_io_num=-1,
.max_transfer_sz=250*250*2,
};
spi_device_interface_config_t devcfg={
.clock_speed_hz=CONFIG_GC9A01_SPI_SCK_FREQ_M*1000*1000,
.clock_speed_hz=GC9A01_SPI_SCK_FREQ_M*1000*1000,
.mode=0,
.spics_io_num=CONFIG_GC9A01_PIN_NUM_CS,
.spics_io_num=GC9A01_PIN_NUM_CS,
.queue_size=7,
.pre_cb=lcd_spi_pre_transfer_callback,
};
......@@ -518,8 +518,8 @@ void gc9a01_SPI_init(void)
ESP_ERROR_CHECK(ret);
}
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_MODE)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#if(GC9A01_CONTROL_BACK_LIGHT_MODE)
void LEDC_PWM_Duty_Set(uint8_t DutyP)
{
uint16_t Duty,MaxD;
......@@ -537,7 +537,7 @@ void LEDC_PWM_Duty_Set(uint8_t DutyP)
void LEDC_Channel_Config(void)
{
ledc_cConfig.gpio_num=CONFIG_GC9A01_PIN_NUM_BCKL;
ledc_cConfig.gpio_num=GC9A01_PIN_NUM_BCKL;
ledc_cConfig.speed_mode=LEDC_LOW_SPEED_MODE;
ledc_cConfig.channel=LEDC_CHANNEL_0;
ledc_cConfig.intr_type=LEDC_INTR_DISABLE;
......@@ -570,14 +570,14 @@ void GC9A01_Init()
gc9a01_GPIO_init();
gc9a01_SPI_init();
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_MODE)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
#if(GC9A01_CONTROL_BACK_LIGHT_MODE)
LEDC_Timer_Config();
LEDC_Channel_Config();
#endif
#endif
#if(CONFIG_GC9A01_RESET_USED)
#if(GC9A01_RESET_USED)
GC9A01_HardReset();
#endif
......@@ -603,18 +603,18 @@ void GC9A01_Init()
GC9A01_DisplayPower(1);
delay_ms(20);
#if(CONFIG_GC9A01_BUFFER_MODE)
#if(GC9A01_BUFFER_MODE)
GC9A01_Clear();
GC9A01_Update();
delay_ms(30);
#endif
#if(CONFIG_GC9A01_CONTROL_BACK_LIGHT_USED)
#if(GC9A01_CONTROL_BACK_LIGHT_USED)
GC9A01_SetBL(100);
#endif
}
#if(CONFIG_GC9A01_BUFFER_MODE)
#if(GC9A01_BUFFER_MODE)
void GC9A01_Screen_Shot(uint16_t x,uint16_t y,uint16_t width ,uint16_t height,uint16_t * Buffer)
{
uint16_t i,j;
......@@ -622,7 +622,7 @@ void GC9A01_Screen_Shot(uint16_t x,uint16_t y,uint16_t width ,uint16_t height,ui
{
for(j=0;j<width;j++)
{
#if(!CONFIG_GC9A01_BUFFER_SCREEN_FAST_MODE)
#if(!GC9A01_BUFFER_SCREEN_FAST_MODE)
Buffer[i*width+j]=GC9A01_GetPixel(x+j,y+i);
#else
Buffer[i*width+j]=ScreenBuff[((y+i) * GC9A01_Width )+ (x+j)];
......@@ -637,7 +637,7 @@ void GC9A01_Screen_Load(uint16_t x,uint16_t y,uint16_t width ,uint16_t height,ui
{
for(j=0;j<width;j++)
{
#if(!CONFIG_GC9A01_BUFFER_SCREEN_FAST_MODE)
#if(!GC9A01_BUFFER_SCREEN_FAST_MODE)
GC9A01_DrawPixel(x+j,y+i,Buffer[i*width+j]);
#else
ScreenBuff[((y+i) * GC9A01_Width )+ (x+j)] = Buffer[i*width+j];
......
components/gc9a01/gc9a01.h
+ 35
− 2
View file @ 6d8c2e9e
......@@ -7,10 +7,43 @@
#include "sdkconfig.h"
#include <stdint.h>
#include "../../revision_config.h"
#define GC9A01_Width CONFIG_GC9A01_Width
#define GC9A01_Height CONFIG_GC9A01_Height
#ifdef CONFIG_GC9A01_PIN_NUM_MOSI
#warning "idf menuconfig is ignored for display config, it breaks hardware revision switching atm"
#endif
#ifdef HARDWARE_REVISION_01
#define USE_SPI3_HOST 1
#define GC9A01_SPI_HOST 2
#define GC9A01_PIN_NUM_SCK 39
#define GC9A01_PIN_NUM_MOSI 41
#define GC9A01_PIN_NUM_CS 40
#define GC9A01_PIN_NUM_DC 42
#define GC9A01_SPI_SCK_FREQ_M 80
#define GC9A01_RESET_USED 1
#define GC9A01_PIN_NUM_RST 38
#define GC9A01_BUFFER_MODE 1
#endif
#ifdef HARDWARE_REVISION_04
#define USE_SPI3_HOST 1
#define GC9A01_SPI_HOST 2
#define GC9A01_PIN_NUM_SCK 41
#define GC9A01_PIN_NUM_MOSI 42
#define GC9A01_PIN_NUM_CS 40
#define GC9A01_PIN_NUM_DC 38
#define GC9A01_SPI_SCK_FREQ_M 80
#define GC9A01_CONTROL_BACK_LIGHT_USED 1
#define GC9A01_PIN_NUM_BCKL 46
#define GC9A01_BACK_LIGHT_MODE_PWM 1
#define GC9A01_CONTROL_BACK_LIGHT_MODE 1
#define GC9A01_BUFFER_MODE 1
#endif
#define GC9A01_Width 240
#define GC9A01_Height 240
extern uint16_t ScreenBuff[GC9A01_Height * GC9A01_Width];
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment