Add syscfg and SPI libraries from STM.

stm/Makefile

@@ -59,15 +59,17 @@ SRC_FATFS = \
 
 SRC_STM = \
 	stm32f4xx_rcc.c \
+	stm32f4xx_syscfg.c \
 	stm32f4xx_flash.c \
 	stm32f4xx_dma.c \
-	stm32f4xx_exti.c \
 	stm32f4xx_gpio.c \
+	stm32f4xx_exti.c \
 	stm32f4xx_tim.c \
 	stm32f4xx_sdio.c \
 	stm32f4xx_pwr.c \
 	stm32f4xx_rtc.c \
 	stm32f4xx_usart.c \
+	stm32f4xx_spi.c \
 	stm_misc.c \
 	usb_core.c \
 	usb_dcd.c \

stm/lib/stm32f4xx_syscfg.c

+/**
+  ******************************************************************************
+  * @file    stm32f4xx_syscfg.c
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    11-January-2013
+  * @brief   This file provides firmware functions to manage the SYSCFG peripheral.
+  *
+ @verbatim
+    
+ ===============================================================================
+                     ##### How to use this driver #####
+ ===============================================================================
+    [..] This driver provides functions for:
+            
+       (#) Remapping the memory accessible in the code area using SYSCFG_MemoryRemapConfig()
+                            
+       (#) Manage the EXTI lines connection to the GPIOs using SYSCFG_EXTILineConfig()
+              
+       (#) Select the ETHERNET media interface (RMII/RII) using SYSCFG_ETH_MediaInterfaceConfig()
+  
+       -@- SYSCFG APB clock must be enabled to get write access to SYSCFG registers,
+           using RCC_APB2PeriphClockCmd(RCC_APB2Periph_SYSCFG, ENABLE);
+                   
+ @endverbatim      
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_conf.h"
+#include "stm32f4xx_syscfg.h"
+#include "stm32f4xx_rcc.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @defgroup SYSCFG 
+  * @brief SYSCFG driver modules
+  * @{
+  */ 
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* ------------ RCC registers bit address in the alias region ----------- */
+#define SYSCFG_OFFSET             (SYSCFG_BASE - PERIPH_BASE)
+
+/* ---  PMC Register ---*/ 
+/* Alias word address of MII_RMII_SEL bit */ 
+#define PMC_OFFSET                (SYSCFG_OFFSET + 0x04) 
+#define MII_RMII_SEL_BitNumber    ((uint8_t)0x17) 
+#define PMC_MII_RMII_SEL_BB       (PERIPH_BB_BASE + (PMC_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) 
+
+/* ---  CMPCR Register ---*/ 
+/* Alias word address of CMP_PD bit */ 
+#define CMPCR_OFFSET              (SYSCFG_OFFSET + 0x20) 
+#define CMP_PD_BitNumber          ((uint8_t)0x00) 
+#define CMPCR_CMP_PD_BB           (PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BitNumber * 4)) 
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/** @defgroup SYSCFG_Private_Functions
+  * @{
+  */ 
+
+/**
+  * @brief  Deinitializes the Alternate Functions (remap and EXTI configuration)
+  *   registers to their default reset values.
+  * @param  None
+  * @retval None
+  */
+void SYSCFG_DeInit(void)
+{
+   RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, ENABLE);
+   RCC_APB2PeriphResetCmd(RCC_APB2Periph_SYSCFG, DISABLE);
+}
+
+/**
+  * @brief  Changes the mapping of the specified pin.
+  * @param  SYSCFG_Memory: selects the memory remapping.
+  *         This parameter can be one of the following values:
+  *            @arg SYSCFG_MemoryRemap_Flash:       Main Flash memory mapped at 0x00000000  
+  *            @arg SYSCFG_MemoryRemap_SystemFlash: System Flash memory mapped at 0x00000000
+  *            @arg SYSCFG_MemoryRemap_FSMC:        FSMC (Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000   
+  *            @arg SYSCFG_MemoryRemap_SRAM:        Embedded SRAM (112kB) mapped at 0x00000000          
+  * @retval None
+  */
+void SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSCFG_MEMORY_REMAP_CONFING(SYSCFG_MemoryRemap));
+
+  SYSCFG->MEMRMP = SYSCFG_MemoryRemap;
+}
+
+/**
+  * @brief  Selects the GPIO pin used as EXTI Line.
+  * @param  EXTI_PortSourceGPIOx : selects the GPIO port to be used as source for
+  *          EXTI lines where x can be (A..I)  for STM32F40xx/STM32F41xx 
+  *         and STM32F427x/STM32F437x devices.
+  *            
+  * @param  EXTI_PinSourcex: specifies the EXTI line to be configured.
+  *           This parameter can be EXTI_PinSourcex where x can be (0..15, except
+  *           for EXTI_PortSourceGPIOI x can be (0..11) for STM32F40xx/STM32F41xx 
+  *           and STM32F427x/STM32F437x devices. 
+  *             
+  * @retval None
+  */
+void SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex)
+{
+  uint32_t tmp = 0x00;
+
+  /* Check the parameters */
+  assert_param(IS_EXTI_PORT_SOURCE(EXTI_PortSourceGPIOx));
+  assert_param(IS_EXTI_PIN_SOURCE(EXTI_PinSourcex));
+
+  tmp = ((uint32_t)0x0F) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03));
+  SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] &= ~tmp;
+  SYSCFG->EXTICR[EXTI_PinSourcex >> 0x02] |= (((uint32_t)EXTI_PortSourceGPIOx) << (0x04 * (EXTI_PinSourcex & (uint8_t)0x03)));
+}
+
+/**
+  * @brief  Selects the ETHERNET media interface 
+  * @param  SYSCFG_ETH_MediaInterface: specifies the Media Interface mode. 
+  *          This parameter can be one of the following values: 
+  *            @arg SYSCFG_ETH_MediaInterface_MII: MII mode selected
+  *            @arg SYSCFG_ETH_MediaInterface_RMII: RMII mode selected 
+  * @retval None 
+  */
+void SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface) 
+{ 
+  assert_param(IS_SYSCFG_ETH_MEDIA_INTERFACE(SYSCFG_ETH_MediaInterface)); 
+  /* Configure MII_RMII selection bit */ 
+  *(__IO uint32_t *) PMC_MII_RMII_SEL_BB = SYSCFG_ETH_MediaInterface; 
+}
+
+/**
+  * @brief  Enables or disables the I/O Compensation Cell.
+  * @note   The I/O compensation cell can be used only when the device supply
+  *         voltage ranges from 2.4 to 3.6 V.  
+  * @param  NewState: new state of the I/O Compensation Cell.
+  *          This parameter can be one of the following values:
+  *            @arg ENABLE: I/O compensation cell enabled  
+  *            @arg DISABLE: I/O compensation cell power-down mode  
+  * @retval None
+  */
+void SYSCFG_CompensationCellCmd(FunctionalState NewState)
+{
+  /* Check the parameters */
+  assert_param(IS_FUNCTIONAL_STATE(NewState));
+
+  *(__IO uint32_t *) CMPCR_CMP_PD_BB = (uint32_t)NewState;
+}
+
+/**
+  * @brief  Checks whether the I/O Compensation Cell ready flag is set or not.
+  * @param  None
+  * @retval The new state of the I/O Compensation Cell ready flag (SET or RESET)
+  */
+FlagStatus SYSCFG_GetCompensationCellStatus(void)
+{
+  FlagStatus bitstatus = RESET;
+    
+  if ((SYSCFG->CMPCR & SYSCFG_CMPCR_READY ) != (uint32_t)RESET)
+  {
+    bitstatus = SET;
+  }
+  else
+  {
+    bitstatus = RESET;
+  }
+  return bitstatus;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/   

stm/lib/stm32f4xx_syscfg.h

+/**
+  ******************************************************************************
+  * @file    stm32f4xx_syscfg.h
+  * @author  MCD Application Team
+  * @version V1.1.0
+  * @date    11-January-2013
+  * @brief   This file contains all the functions prototypes for the SYSCFG firmware
+  *          library. 
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2013 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_SYSCFG_H
+#define __STM32F4xx_SYSCFG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/** @addtogroup STM32F4xx_StdPeriph_Driver
+  * @{
+  */
+
+/** @addtogroup SYSCFG
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+  
+/** @defgroup SYSCFG_Exported_Constants 
+  * @{
+  */ 
+
+/** @defgroup SYSCFG_EXTI_Port_Sources 
+  * @{
+  */ 
+#define EXTI_PortSourceGPIOA       ((uint8_t)0x00)
+#define EXTI_PortSourceGPIOB       ((uint8_t)0x01)
+#define EXTI_PortSourceGPIOC       ((uint8_t)0x02)
+#define EXTI_PortSourceGPIOD       ((uint8_t)0x03)
+#define EXTI_PortSourceGPIOE       ((uint8_t)0x04)
+#define EXTI_PortSourceGPIOF       ((uint8_t)0x05)
+#define EXTI_PortSourceGPIOG       ((uint8_t)0x06)
+#define EXTI_PortSourceGPIOH       ((uint8_t)0x07)
+#define EXTI_PortSourceGPIOI       ((uint8_t)0x08)
+  
+#define IS_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == EXTI_PortSourceGPIOA) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOB) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOC) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOD) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOE) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOF) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOG) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOH) || \
+                                         ((PORTSOURCE) == EXTI_PortSourceGPIOI))
+                                         
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SYSCFG_EXTI_Pin_Sources 
+  * @{
+  */ 
+#define EXTI_PinSource0            ((uint8_t)0x00)
+#define EXTI_PinSource1            ((uint8_t)0x01)
+#define EXTI_PinSource2            ((uint8_t)0x02)
+#define EXTI_PinSource3            ((uint8_t)0x03)
+#define EXTI_PinSource4            ((uint8_t)0x04)
+#define EXTI_PinSource5            ((uint8_t)0x05)
+#define EXTI_PinSource6            ((uint8_t)0x06)
+#define EXTI_PinSource7            ((uint8_t)0x07)
+#define EXTI_PinSource8            ((uint8_t)0x08)
+#define EXTI_PinSource9            ((uint8_t)0x09)
+#define EXTI_PinSource10           ((uint8_t)0x0A)
+#define EXTI_PinSource11           ((uint8_t)0x0B)
+#define EXTI_PinSource12           ((uint8_t)0x0C)
+#define EXTI_PinSource13           ((uint8_t)0x0D)
+#define EXTI_PinSource14           ((uint8_t)0x0E)
+#define EXTI_PinSource15           ((uint8_t)0x0F)
+#define IS_EXTI_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == EXTI_PinSource0)  || \
+                                       ((PINSOURCE) == EXTI_PinSource1)  || \
+                                       ((PINSOURCE) == EXTI_PinSource2)  || \
+                                       ((PINSOURCE) == EXTI_PinSource3)  || \
+                                       ((PINSOURCE) == EXTI_PinSource4)  || \
+                                       ((PINSOURCE) == EXTI_PinSource5)  || \
+                                       ((PINSOURCE) == EXTI_PinSource6)  || \
+                                       ((PINSOURCE) == EXTI_PinSource7)  || \
+                                       ((PINSOURCE) == EXTI_PinSource8)  || \
+                                       ((PINSOURCE) == EXTI_PinSource9)  || \
+                                       ((PINSOURCE) == EXTI_PinSource10) || \
+                                       ((PINSOURCE) == EXTI_PinSource11) || \
+                                       ((PINSOURCE) == EXTI_PinSource12) || \
+                                       ((PINSOURCE) == EXTI_PinSource13) || \
+                                       ((PINSOURCE) == EXTI_PinSource14) || \
+                                       ((PINSOURCE) == EXTI_PinSource15))
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SYSCFG_Memory_Remap_Config 
+  * @{
+  */ 
+#define SYSCFG_MemoryRemap_Flash       ((uint8_t)0x00)
+#define SYSCFG_MemoryRemap_SystemFlash ((uint8_t)0x01)
+#define SYSCFG_MemoryRemap_SRAM        ((uint8_t)0x03)
+#define SYSCFG_MemoryRemap_FSMC        ((uint8_t)0x02) 
+
+#define IS_SYSCFG_MEMORY_REMAP_CONFING(REMAP) (((REMAP) == SYSCFG_MemoryRemap_Flash)       || \
+                                               ((REMAP) == SYSCFG_MemoryRemap_SystemFlash) || \
+                                               ((REMAP) == SYSCFG_MemoryRemap_SRAM)        || \
+                                               ((REMAP) == SYSCFG_MemoryRemap_FSMC))
+                                                                                              
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SYSCFG_ETHERNET_Media_Interface 
+  * @{
+  */ 
+#define SYSCFG_ETH_MediaInterface_MII    ((uint32_t)0x00000000)
+#define SYSCFG_ETH_MediaInterface_RMII   ((uint32_t)0x00000001)
+
+#define IS_SYSCFG_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == SYSCFG_ETH_MediaInterface_MII) || \
+                                                 ((INTERFACE) == SYSCFG_ETH_MediaInterface_RMII))
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/ 
+ 
+void       SYSCFG_DeInit(void);
+void       SYSCFG_MemoryRemapConfig(uint8_t SYSCFG_MemoryRemap);
+void       SYSCFG_EXTILineConfig(uint8_t EXTI_PortSourceGPIOx, uint8_t EXTI_PinSourcex);
+void       SYSCFG_ETH_MediaInterfaceConfig(uint32_t SYSCFG_ETH_MediaInterface); 
+void       SYSCFG_CompensationCellCmd(FunctionalState NewState); 
+FlagStatus SYSCFG_GetCompensationCellStatus(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_SYSCFG_H */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/