fix(pmic): Actually set SBB1 to 3.3 V. Remove current limit. Might introduce noise.

Hello_World/main.c

@@ -100,26 +100,25 @@ uint32_t ecg_read_reg(uint8_t reg)
 
 void pmic_init(void)
 {
-
     uint8_t didm = MAX77650_getDIDM();
     uint8_t cid = MAX77650_getChipID();
     printf("MAX7765x DIDM: 0x%02x CID: 0x%02x\n", didm, cid);
 
-    MAX77650_setIP_SBB0(0b11);  //Limit output of SBB0 to 500mA
+    //MAX77650_setIP_SBB0(0b11);  //Limit output of SBB0 to 500mA
     MAX77650_setTV_SBB0(0b101000); //Set output Voltage of SBB0 to 1.8V
     MAX77650_setADE_SBB0(0b0); //Disable Active Discharge at SBB0 Output
     MAX77650_setEN_SBB0(0b110); //Enable SBB0 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
 
-    MAX77650_setIP_SBB1(0b11);  //Limit output of SBB1 to 500mA
+    //MAX77650_setIP_SBB1(0b11);  //Limit output of SBB1 to 500mA
 #if BOARD_EVKIT
     MAX77650_setTV_SBB1(0b100000); //Set output Voltage of SBB1 to 1.2V
 #else
-    MAX77650_setTV_SBB1(0b100010); //Set output Voltage of SBB1 to 3.3V
+    MAX77650_setTV_SBB1(0b001001); //Set output Voltage of SBB1 to 3.3V
 #endif
     MAX77650_setADE_SBB1(0b0); //Disable Active Discharge at SBB1 Output
     MAX77650_setEN_SBB1(0b110); //Enable SBB1 is on irrespective of FPS whenever the on/off controller is in its "On via Software" or "On via On/Off Controller" states
 
-    MAX77650_setIP_SBB2(0b11);  //Limit output of SBB2 to 500mA
+    //MAX77650_setIP_SBB2(0b11);  //Limit output of SBB2 to 500mA
 #if BOARD_EVKIT
     MAX77650_setTV_SBB2(0b110010); //Set output Voltage of SBB2 to 3.3V
 #else