Skip to content
Snippets Groups Projects
Select Git revision
  • a26664be9bf6dcdccf05c3f0cbe6c245c0ca41de
  • master default protected
  • card10_nickname_fix
  • genofire/ble-card10-timeread
  • schneider/fundamental-test
  • schneider/ble-buffers
  • ios-workarounds
  • schneider/maxim-sdk-update
  • rahix/simple_menu
  • ch3/splashscreen
  • koalo/bhi160-works-but-dirty
  • koalo/wip/i2c-for-python
  • renze/safe_mode
  • renze/hatchery_apps
  • koalo/factory-reset
  • msgctl/gfx_rle
  • msgctl/faultscreen
  • msgctl/textbuffer_api
  • schneider/bonding
  • schneider/bootloader-update-9a0d158
  • schneider/bsec
  • v1.5
  • v1.4
  • v1.3
  • v1.2
  • v1.1
  • v1.0
  • release-1
  • bootloader-v1
  • v0.0
30 results

bootloader-display.c

Blame
    • Forked from card10 / firmware
    Source project has a limited visibility.
    changes.txt 9.19 KiB 
    ###### Changes in version 0.2.1-10 #############################################
* Renamed IRQ number 0x65 from RPU_IRQHandler to SCA_IRQHandler.
* Changed some low-level register names and fields to match the User Guide.
* Fixed incorrect RPU base address.

###### Changes in version 0.2.1-9 #############################################
* Adding Bootloader application and BLE file transfer to BLE_datc/BLE_dats.
* Enabling PHY switching with SDMA.
* Separating SDMA code and data sections into dedicated SRAM instances.
* Adding Backup mode option to BLE_fit_ds example.
* Adding PER reporing to BLE_datc when WSF_TRACE_ENABLED is defined. 
* Adding QSPI and SPI_DMA examples, enhancing SPI example.
* Enhancing USB_CompositeDevice_CDCACM example.

###### Changes in version 0.2.1-8 #############################################
* Fixing warning with FreeRTOS example. Prevening build with -mfloat-abi=soft 
* Allowing for BLE Libraries to be built with -mfloat-abi=hard/soft/softfp
* Fixing bug with BLE Encryption disable
* Using default definition of 1 ms for WSF_MS_PER_TICK

###### Changes in version 0.2.1-7 #############################################
* Improved USB_CompositeDevice example to support high speed USB.
* Added function to enter background mode to lp.c/h.
* Added function to read the device's serial number (USN) to mxc_sys.c/h.
* Provided missing wakeup timer functions (wut.c/h).
* Added BLE deep sleep example.
* Removed debug symbols from pre-built BLE libraries.
* Made BLE transmit power a build time option.

###### Changes in version 0.2.1-6 #############################################
* Changed gcc.mk to allow overriding the -mfloat-abi and -mfpu switches.

###### Changes in version 0.2.1-5 #############################################
* Removed the CONSOLE_UART override in the config.mk files for BLE.
* Addressed an issue with the BLE scanning apps that was causing a hard fault.
* Added board support files for the MAX66900 and FTHR boards.
* Made cmsis-dap the default debugger for the BLE apps.
* Added configuration option to enable ECC.  Adjusted the example to use the
  configuration option instead of setting up the ECC in the PreInit function.
* Fixed bug in mxc_delay when dealing with very small delay times.
* Fixed bug in SDHC code that affected asynchronous operations.
* Fixed bug in SDHC_Lib_GetCapacity function.
* Added a function to USB code to transmit test pattern.

###### Changes in version 0.2.1-2 #############################################
* Resolved parser errors when importing projects into Eclipse.
* Added calls to LlGetBdAddr in SetAddress functions of the BLE examples.
* Added debounce code to GPIO example.
* Modifed I2C, SPI, and UART examples to wait for a push-button event before 
  running.
* Modified SDHC examples to ensure card is properly powered.
* Increased the number of example projects that appear in Eclipse's new project 
  wizard.
* Added #defines for ADC->CTRL->CH_SEL and ADC->CTRL->ADC_DIVSEL fields.
* Fixed incorrect bit positions for ADC->CTRL->ADC_DIVSEL and 
  ADC->CTRL->DATA_ALIGN fields.
* Populated dvs_regs.h file.
* Removed references to GPIO2, MIPI, and PBM.
* Fixed incorrect offsets for SIMO registers.
* Fixed the ADC channel select enumeration.
* Added SDHC_PowerUp and SDHC_PowerDown functions to the SDHC API.
* Added a UART_Disable function to the UART API.
* Fixed error where incorrect reference voltage was selected for certain ADC 
  channels.
* Fixed errors in I2C code where the incorrect register was written when 
  attempting to configure FIFO threshold levels.
* Swapped the order in which I2C FIFOs are handled so that transmit is handled 
  before receive.
* Fixed error that occurred when attempting to disable SPI2.
* Added ECC and LCD examples.
    * Modified USB libraries to allow chaining of class requests.

###### Changes in version 0.2.1-0 #############################################
* Updated SPIXF and SPIXR example to work with EV kit hardware.
* Added USB composite device example.
* Adjusted flash page size settings to match hardware.
* Set MXC_ICC1 to the correct base address.
* Set MXC_SPIx to the correct base addresses.
* Moved default implementation of SysTick_Handler from startup_max32665.S to 
  mxc_delay.c.
* Renamed crypto_maa_clcsel_t structure to tpu_maa_clcsel_t.
* Added RTC_GetTime function to provide an atomic read of the RTC's seconds and
  subseconds registers.
* Fixed bug in Flash write/erase operations to properly clear internal caches 
  after operation completes.
* Added SPI code to disallow changing the character size in the middle of a
  transaction.
* Improved support for 3-wire and 4-wire SPI modes for SPI0.
* Modified SPI0 code to keep output line low when performing a transaction with
  a transmit length of zero.
* Modified SPI0 code to allow another transaction to be armed from within the
  callback function of the current transaction.
* Fixed bug in USB driver that was causing a packet to be skipped when
  transmitting data.
* Added the ability to ignore the the DTE signal state for the CDC-ACM class.
* Changed return code of SDHC_LIB_GetBlockSize from unsigned int to signed int 
  allowing negative return values to be used to represent errors.
* I2C clock speed settings adjusted for better performance in high-speed mode.
* I2C driver modified to better handle transactions using a repeated start.
* I2C driver modified to return error when slave address is not acknowledged.
* Improved API documentation.
* Added BLE vendor specific HCI Command for setting controller supported 
  features.
* Added BLE vendor specific HCI Command for sending custom data channel PDUs. 
* Added support for LE Read Local P-256 Public Key Command and LE Generate 
  DHKey Command.
* Fixed bugs with BLE PHY update procedure. 
* Fixed bug with BLE dvertising pause and connection request processing.
* Fixed bug with BLE AES encryption. 
* Updated default BLE controller supported features.
* Added sending of BLE channel selection algorithm event to peer. 
* Added prevention of mixing BLE legacy and extended advertising commands. 
* Added sending unknown BLE response PDUs to malformed Link Layer Control 
  Packets.
* Added usage of BLE RF path compensation values in the calculation of RSSI and 
  maximum TX Power.

###### Changes in version 0.2.0-0 #############################################
* Added "#pragma system_include" to all register header files.
* Removed enumerations of 1-bit fields in the register header files.
* Fixed errors in gcr_reg.h file.  Certain fields had the incorrect location.
* PWRSEQ->bb_gp0 renamed ro PWRSEQ->gp0.
* PWRSEQ->bb_gp1 renamed ro PWRSEQ->gp1.
* Added definitions for the SIMO registers and fields.
* Changed defined UART FIFO size to match actual hardware FIFO size.
* BBCTRL renamed to FCR.  The registers and fields within these register header
  files have been renamed also.
* HTIMER renamed to HTMR.  This affects all related function names,
  configuration objects, etc.
* BBCTRL renamed to MCR.  This affects all related function names,
  configuration objects, etc.
* SPID renamed to SPIXR.  This affects all related function names,
  configuration objects, etc.
* SPIX renamed to SPIXF.  This affects all related function names,
  configuration objects, etc.
* SPIXC renamed to SPIXFC.  This affects all related function names,
  configuration objects, etc.
* CRYPTO renamed to TPU.  This affects all related function names,
  configuration objects, etc.
* crypto.c split into cipher.c and hash.c APIs.
    * Modified GCC linker file to add support for eternal SPI memories and to
  handle both internal ARM cores.
* Cleaned up interrupt vector table to remove (rename to RSVxx) unused vectors.
* FLC_Erase renamed to FLC_MultiPageErase.
* FLC_BufferErase renamed to FLC_Erase.
* Added LP_FastWakeupEnable, LP_FastWakeupDisable, LP_PowerFailMonitorEnable,
  and LP_PowerFailMonitorDisable functions.
* SYS_ClockEnable_X32K renamed to SYS_RTCClockEnable.
* SYS_Reset0 renamed to SYS_Reset_Periph and the code modified to handle all
  peripherals defined in the rstr0 and rstr1 registers.
* Added a function (PT_GetBPS) to the pulse train API to retreive the current
  rate of a given pulse train.
* Added a function (RPU_IsAllowed) to the resource protection unit API to check
  if the current process is allowed to modify the protection settings.
* Added an API for controlling the secondary ARM core.
* Removed empty audio.c and audio.h files.
* Support for all system clocks added.  (Previous release only allowed
  switching between 96M and 8M clocks.)
* Implemented SIMO API.
* Modified mxc_syc to no longer shutdown any of the system clocks when
  peripherals are disabled.  This control is now left to the application.
* LP example improved to acheive better (lower) power measurements.
* TRNG example expanded to demonstrate using a random IV when performing an
  encryption.
* Added example on using the ADC.
* Added example on using both ARM cores.
* Added example on using the resource protection unit.
* MX25 library code cleaned up to add consistency in capitalization and
  function names.

###### Changes in version 0.1.0-2 #############################################
* Initial release