Use TMR3 instead of TMR5 for interrupts from epicardium

Any reason to use TMR5 except preventing the use of PWM on the IR LED?

TMR4 is used for the LCD backlight it seems.

epicardium/api/control.c

@@ -74,7 +74,7 @@ void __core1_init(void)
 	/*
 	 * Clear any pending API interrupts.
 	 */
-	TMR_IntClear(MXC_TMR5);
+	TMR_IntClear(MXC_TMR3);
 
 	/*
 	 * Reset Interrupts
@@ -176,8 +176,8 @@ void __core1_init(void)
 	/*
 	 * Clear any pending API interrupts.
 	 */
-	TMR_IntClear(MXC_TMR5);
-	NVIC_ClearPendingIRQ(TMR5_IRQn);
+	TMR_IntClear(MXC_TMR3);
+	NVIC_ClearPendingIRQ(TMR3_IRQn);
 
 	/*
 	 * Jump to payload's reset handler

epicardium/api/interrupt-receiver.c

@@ -6,9 +6,9 @@
 void __dispatch_isr(api_int_id_t);
 
 /* Timer Interrupt used for control char notification */
-void TMR5_IRQHandler(void)
+void TMR3_IRQHandler(void)
 {
-	TMR_IntClear(MXC_TMR5);
+	TMR_IntClear(MXC_TMR3);
 	__dispatch_isr(API_CALL_MEM->int_id);
 	API_CALL_MEM->int_id = (-1);
 }

epicardium/api/interrupt-sender.c

@@ -15,7 +15,7 @@ int api_interrupt_trigger(api_int_id_t id)
 			;
 
 		API_CALL_MEM->int_id = id;
-		TMR_TO_Start(MXC_TMR5, 1, 0);
+		TMR_TO_Start(MXC_TMR3, 1, 0);
 	}
 	return 0;
 }

l0dables/lib/crt.s

@@ -207,8 +207,8 @@ DefaultHandler:
 		def_irq_handler    TMR0_IRQHandler
 		def_irq_handler    TMR1_IRQHandler
 		def_irq_handler    TMR2_IRQHandler
-		def_irq_handler    TMR3_IRQHandler
 		def_irq_handler    TMR4_IRQHandler
+		def_irq_handler    TMR5_IRQHandler
 		def_irq_handler    RSV11_IRQHandler
 		def_irq_handler    RSV12_IRQHandler
 		def_irq_handler    I2C0_IRQHandler

l0dables/lib/hardware.c

@@ -77,7 +77,7 @@ __weak void SystemInit()
 	SystemCoreClockUpdate();
 
 	// Enable API interrupt.
-	NVIC_EnableIRQ(TMR5_IRQn);
+	NVIC_EnableIRQ(TMR3_IRQn);
 }
 
 // newlib syscall to allow printf to work.

pycardium/mphalport.c

@@ -23,8 +23,8 @@
 /* Initialize everything for MicroPython */
 void pycardium_hal_init(void)
 {
-	/* TMR5 is used for interrupts from Epicardium */
-	NVIC_EnableIRQ(TMR5_IRQn);
+	/* TMR3 is used for interrupts from Epicardium */
+	NVIC_EnableIRQ(TMR3_IRQn);
 
 	/*
 	 * Enable UART RX Interrupt so Pycardium can sleep until