Skip to content
Snippets Groups Projects
Commit 7f16030c authored by schneider's avatar schneider
Browse files

chore(oled): remove old oled code

parent aee51faf
No related branches found
No related tags found
No related merge requests found
Expand all Hide whitespace changes
Inline Side-by-side
bmatest/Makefile
+ 0
− 2
View file @ 7f16030c
......@@ -67,8 +67,6 @@ CMSIS_ROOT=$(LIBS_DIR)/CMSIS
# Source files for this test (add path to VPATH below)
SRCS = main.c
SRCS += oled96.c
SRCS += fonts.c
SRCS += pmic.c
SRCS += bosch.c
SRCS += bhy_support.c bhy_uc_driver.c bhy.c
......
bmatest/main.c
+ 0
− 7
View file @ 7f16030c
......@@ -11,7 +11,6 @@
#include "rtc.h"
#include "spi.h"
#include "gpio.h"
#include "oled96.h"
#include "bma400.h"
#include "bosch.h"
......@@ -58,12 +57,6 @@ int main(void)
card10_init();
card10_diag();
oledInit(0x3c, 0, 0);
oledFill(0x00);
oledWriteString(0, 0, "Hello", 0);
oledWriteString(0, 2, "my name is", 0);
oledWriteString(0, 4, "card10", 1);
struct bma400_dev bma;
struct bma400_int_enable tap_int[2];
struct bma400_sensor_conf conf[2];
......
imutest/Makefile
+ 0
− 2
View file @ 7f16030c
......@@ -67,8 +67,6 @@ CMSIS_ROOT=$(LIBS_DIR)/CMSIS
# Source files for this test (add path to VPATH below)
SRCS = main.c
SRCS += oled96.c
SRCS += fonts.c
SRCS += pmic.c
SRCS += bosch.c
SRCS += bhy_support.c bhy_uc_driver.c bhy.c
......
lib/card10/fonts.c deleted 100644 → 0
+ 0
− 1693
View file @ aee51faf
This diff is collapsed.
lib/card10/oled96.c deleted 100644 → 0
+ 0
− 240
View file @ aee51faf
// OLED SSD1306 using the I2C interface
// Written by Larry Bank (bitbank@pobox.com)
// Project started 1/15/2017
//
// The I2C writes (through a file handle) can be single or multiple bytes.
// The write mode stays in effect throughout each call to write()
// To write commands to the OLED controller, start a byte sequence with 0x00,
// to write data, start a byte sequence with 0x40,
// The OLED controller is set to "page mode". This divides the display
// into 8 128x8 "pages" or strips. Each data write advances the output
// automatically to the next address. The bytes are arranged such that the LSB
// is the topmost pixel and the MSB is the bottom.
// The font data comes from another source and must be rotated 90 degrees
// (at init time) to match the orientation of the bits on the display memory.
// A copy of the display memory is maintained by this code so that single pixel
// writes can occur without having to read from the display controller.
#include <unistd.h>
#include <stdio.h>
#include <string.h>
#include "oled96.h"
#include "i2c.h"
#define I2C_DEVICE MXC_I2C0_BUS0
extern unsigned char ucFont[], ucSmallFont[];
static int iScreenOffset; // current write offset of screen data
static unsigned char ucScreen[1024]; // local copy of the image buffer
static uint8_t addr;
static void oledWriteCommand(unsigned char);
//
// Initializes the OLED controller into "page mode"
// Prepares the font data for the orientation of the display
//
int oledInit(int iAddr, int bFlip, int bInvert)
{
const unsigned char initbuf[]={0x00,0xae,0xa8,0x3f,0xd3,0x00,0x40,0xa0,0xa1,0xc0,0xc8,
0xda,0x12,0x81,0xff,0xa4,0xa6,0xd5,0x80,0x8d,0x14,
0xaf,0x20,0x02};
unsigned char uc[4];
addr = iAddr;
I2C_MasterWrite(I2C_DEVICE, addr << 1, initbuf, sizeof(initbuf), 0);
if (bInvert)
{
uc[0] = 0; // command
uc[1] = 0xa7; // invert command
I2C_MasterWrite(I2C_DEVICE, addr << 1, uc, 2, 0);
}
if (bFlip) // rotate display 180
{
uc[0] = 0; // command
uc[1] = 0xa0;
I2C_MasterWrite(I2C_DEVICE, addr << 1, uc, 2, 0);
uc[1] = 0xc0;
I2C_MasterWrite(I2C_DEVICE, addr << 1, uc, 2, 0);
}
return 0;
} /* oledInit() */
// Sends a command to turn off the OLED display
// Closes the I2C file handle
void oledShutdown()
{
oledWriteCommand(0xaE); // turn off OLED
}
// Send a single byte command to the OLED controller
static void oledWriteCommand(unsigned char c)
{
unsigned char buf[2];
buf[0] = 0x00; // command introducer
buf[1] = c;
I2C_MasterWrite(I2C_DEVICE, addr << 1, buf, 2, 0);
} /* oledWriteCommand() */
static void oledWriteCommand2(unsigned char c, unsigned char d)
{
unsigned char buf[3];
buf[0] = 0x00;
buf[1] = c;
buf[2] = d;
I2C_MasterWrite(I2C_DEVICE, addr << 1, buf, 3, 0);
} /* oledWriteCommand2() */
int oledSetContrast(unsigned char ucContrast)
{
oledWriteCommand2(0x81, ucContrast);
return 0;
} /* oledSetContrast() */
//static void oledWriteData(unsigned char c)
//{
//unsigned char buf[2];
// buf[0] = 0x40; // data introducer
// buf[1] = c;
// write(file_i2c, buf, 2);
//} /* oledWriteData() */
// Send commands to position the "cursor" to the given
// row and column
static void oledSetPosition(int x, int y)
{
oledWriteCommand(0xb0 | y); // go to page Y
oledWriteCommand(0x00 | (x & 0xf)); // // lower col addr
oledWriteCommand(0x10 | ((x >> 4) & 0xf)); // upper col addr
iScreenOffset = (y*128)+x;
}
//static void oledWrite(unsigned char c)
//{
// write(file_i2c, &c, 1);
//} /* oledWrite() */
// Write a block of pixel data to the OLED
// Length can be anything from 1 to 1024 (whole display)
static void oledWriteDataBlock(unsigned char *ucBuf, int iLen)
{
unsigned char ucTemp[129];
ucTemp[0] = 0x40; // data command
memcpy(&ucTemp[1], ucBuf, iLen);
I2C_MasterWrite(I2C_DEVICE, addr << 1, ucTemp, iLen+1, 0);
// Keep a copy in local buffer
memcpy(&ucScreen[iScreenOffset], ucBuf, iLen);
iScreenOffset += iLen;
}
// Set (or clear) an individual pixel
// The local copy of the frame buffer is used to avoid
// reading data from the display controller
int oledSetPixel(int x, int y, unsigned char ucColor)
{
int i;
unsigned char uc, ucOld;
i = ((y >> 3) * 128) + x;
if (i < 0 || i > 1023) // off the screen
return -1;
uc = ucOld = ucScreen[i];
uc &= ~(0x1 << (y & 7));
if (ucColor)
{
uc |= (0x1 << (y & 7));
}
if (uc != ucOld) // pixel changed
{
oledSetPosition(x, y>>3);
oledWriteDataBlock(&uc, 1);
}
return 0;
} /* oledSetPixel() */
//
// Draw a string of small (8x8), large (16x24), or very small (6x8) characters
// At the given col+row
// The X position is in character widths (8 or 16)
// The Y position is in memory pages (8 lines each)
//
int oledWriteString(int x, int y, char *szMsg, int iSize)
{
int i, iLen;
unsigned char *s;
if (iSize < FONT_NORMAL || iSize > FONT_SMALL)
return -1;
iLen = strlen(szMsg);
if (iSize == FONT_BIG) // draw 16x32 font
{
if (iLen+x > 8) iLen = 8-x;
if (iLen < 0) return -1;
x *= 16;
for (i=0; i<iLen; i++)
{
s = &ucFont[9728 + (unsigned char)szMsg[i]*64];
oledSetPosition(x+(i*16), y);
oledWriteDataBlock(s, 16);
oledSetPosition(x+(i*16), y+1);
oledWriteDataBlock(s+16, 16);
oledSetPosition(x+(i*16), y+2);
oledWriteDataBlock(s+32, 16);
// oledSetPosition(x+(i*16), y+3);
// oledWriteDataBlock(s+48, 16);
}
}
else if (iSize == FONT_NORMAL) // draw 8x8 font
{
oledSetPosition(x*8, y);
if (iLen + x > 16) iLen = 16 - x; // can't display it
if (iLen < 0)return -1;
for (i=0; i<iLen; i++)
{
s = &ucFont[(unsigned char)szMsg[i] * 8];
oledWriteDataBlock(s, 8); // write character pattern
}
}
else // 6x8
{
oledSetPosition(x*6, y);
if (iLen + x > 21) iLen = 21 - x;
if (iLen < 0) return -1;
for (i=0; i<iLen; i++)
{
s = &ucSmallFont[(unsigned char)szMsg[i]*6];
oledWriteDataBlock(s, 6);
}
}
return 0;
} /* oledWriteString() */
// Fill the frame buffer with a byte pattern
// e.g. all off (0x00) or all on (0xff)
int oledFill(unsigned char ucData)
{
int y;
unsigned char temp[128];
memset(temp, ucData, 128);
for (y=0; y<8; y++)
{
oledSetPosition(0,y); // set to (0,Y)
oledWriteDataBlock(temp, 128); // fill with data byte
} // for y
return 0;
} /* oledFill() */
int oledset(uint8_t *content)
{
int y;
for (y=0; y<8; y++) {
oledSetPosition(0,y);
oledWriteDataBlock(&content[128*y], 128);
}
}
lib/card10/oled96.h deleted 100644 → 0
+ 0
− 42
View file @ aee51faf
#ifndef OLED96_H
#define OLED96_H
//
// OLED96
// Library for accessing the 0.96" SSD1306 128x64 OLED display
// Written by Larry Bank (bitbank@pobox.com)
// Copyright (c) 2017 BitBank Software, Inc.
// Project started 1/15/2017
//
typedef enum
{
FONT_NORMAL=0, // 8x8
FONT_BIG, // 16x24
FONT_SMALL // 6x8
} FONTSIZE;
// Initialize the OLED96 library for a specific I2C address
// Optionally enable inverted or flipped mode
// returns 0 for success, 1 for failure
//
int oledInit(int iAddress, int bFlip, int bInvert);
// Turns off the display and closes the I2C handle
void oledShutdown(void);
// Fills the display with the byte pattern
int oledFill(unsigned char ucPattern);
// Write a text string to the display at x (column 0-127) and y (row 0-7)
// bLarge = 0 - 8x8 font, bLarge = 1 - 16x24 font
int oledWriteString(int x, int y, char *szText, int bLarge);
// Sets a pixel to On (1) or Off (0)
// Coordinate system is pixels, not text rows (0-127, 0-63)
int oledSetPixel(int x, int y, unsigned char ucPixel);
// Sets the contrast (brightness) level of the display
// Valid values are 0-255 where 0=off and 255=max brightness
int oledSetContrast(unsigned char ucContrast);
int oledset(uint8_t *content);
#endif // OLED96_H
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment