fix(ble): write new mac if files does not exist

See merge request !373

Fix LED mutex stuff

See merge request !369

leds_update_power() internally accesses the I2C bus so calls to this
function need to be inside an I2C lock section.

Signed-off-by: Rahix <rahix@rahix.de>

Signed-off-by: Rahix <rahix@rahix.de>

Signed-off-by: Rahix <rahix@rahix.de>

FS locking and FD counting

See merge request !370

Display a message on system panic

See merge request !362

See merge request !368

Instead of an ugly hack where spaces are used to pad the entries
background colors, properly draw a rectangle and the text above
it.  No visual change.

Signed-off-by: Rahix <rahix@rahix.de>

The query-arg is not needed, remove it.

Signed-off-by: Rahix <rahix@rahix.de>

Currently, panics will silently reboot if the user doesn't happen to
look at the serial console when it happens.  To give a bit more
feedback, display @msgctl's faultsplash and the panic messages as well.

Co-authored-by: Mateusz Zalega <mateusz@appliedsourcery.com>
Signed-off-by: Rahix <rahix@rahix.de>

See merge request !367

Originally, commit 1a3dfad3 ("fix(bhi160): Fix interrupt behavior
during initialization") was supposed to fix the BHI160 axis-mapping
issue (see card10/firmware#133) but apparently on some devices it still
needs the original hack to work.  Revert the removal of the axis-mapping
hack from commit 2f56ff36 ("fix(bhi160): Call bhy_mapping_matrix_set
twice for the first time").

Fixes: 1a3dfad3 ("fix(bhi160): Fix interrupt behavior during initialization")
Link: https://git.card10.badge.events.ccc.de/card10/firmware/issues/133


Signed-off-by: Rahix <rahix@rahix.de>

The mac Adress was printed in the wrong order, BLE stroes the MAC
address in LSB first mode, different from Ethernet which uses MSB first
mode.

Fixes: aece2960 ("feat(ble): Add some log messages")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Instead of setting these values to 0, use the same settings as used in
lib/sdk/Libraries/BTLE/stack/ble-host/sources/stack/cfg/cfg_stack.c from
the Cordio SDK instead of 0.

In my small test these value sare not use in the normal pairing process,
so I think this is not fixing any problem.

Fixes: 4107bd22 ("hack(ble): Temporarily silence a warning")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

Signed-off-by: Rahix <rahix@rahix.de>

Signed-off-by: Rahix <rahix@rahix.de>

Commit dbeec980 ("fix(pycardium): Fix delay implementation") enables
the systick on core 1 but on loading a new app, it is not reset which
makes some l0dables crash.  Fix this by always resetting (disabling) the
SysTick in the core1_reset() stub.

Fixes: dbeec980 ("fix(pycardium): Fix delay implementation")
Reported-by: Beastie <fischervincent98@gmail.com>
Signed-off-by: Rahix <rahix@rahix.de>

See merge request !364

If an app directory is missing metadata.json or if metadata.json is
invalid/cannot be parsed correctly, don't just print an error, also add
a menu entry based on what we'd hope to be correct information.  This is
obviously best effort only and there is no guarantee that it will work.

Signed-off-by: Rahix <rahix@rahix.de>

Closes #181

See merge request !366

The first epic_ws2812_write() call will set the first pixel to 0x008000
(bright green).  This is caused by the GPIO line being pulled down on
mode-setting (epic_gpio_set_pin_mode).  Wait before writing the values
to reset the bus and thus properly set the pixels to the correct colors
on first write.

Signed-off-by: Rahix <rahix@rahix.de>

Closes #133

See merge request !365

The orientation sensor uses a different axis mapping than the other
sensors.  Document this.

Signed-off-by: Rahix <rahix@rahix.de>

Don't open all 4 virtual sensors all time time; only open the one which
is actually displayed.  This prevents the storm of queue-full message on
the serial terminal.

Signed-off-by: Rahix <rahix@rahix.de>

If initialization fails, bhi160 API calls should not infinitely block
waiting for it to complete; they should fail immediately with an error
stating that something went wrong.

Add a flag that indicates the driver to not accept API requests because
initialization was not finished properly.

Signed-off-by: Rahix <rahix@rahix.de>

As discussed in issue card10/firmware#133, the BHI160 changes its
interrupt behavior during initialization.  In commit 2f56ff36
("fix(bhi160): Call bhy_mapping_matrix_set twice for the first time")
a quick workaround for this issue was added.  Replace this hack with
a proper fix by reconfiguring the interrupt on the host side according
to the specification.

(Finally) fixes card10/firmware#133.

Fixes: 2f56ff36 ("fix(bhi160): Call bhy_mapping_matrix_set twice for the first time")
Link: https://git.card10.badge.events.ccc.de/card10/firmware/issues/133#note_5894


Signed-off-by: Rahix <rahix@rahix.de>

Port the bhi160 mutex and hwlock usage in bhi.c to the new mutex API.
This will hopefully increase system stability.

Signed-off-by: Rahix <rahix@rahix.de>

Closes #189

See merge request !363

The call to MAX77650_getDebounceStatusnEN0() in epic_buttons_read()
performs transactions on the I2C bus but is not guarded by locking the
I2C hwlock.  This leads to strange issues like USB mode deadlocking when
writing large files.

Widen the hwlock I2C section to encompass the MAX77650_getDebounceStatusnEN0()
call as well.  This fixes #189.

Signed-off-by: Rahix <rahix@rahix.de>

Port the buttons module to the new hardware lock API which can no longer
fail.

Signed-off-by: Rahix <rahix@rahix.de>