use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effects

git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60

tcl/target/lpc1768.cfg

@@ -34,7 +34,8 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
-	soft_reset_halt
+	# Force target into ARM state
+	armv4_5 core_state arm
 	#do not remap 0x0000-0x0020 to anything but the flash
 #	mwb 0xE01FC040 0x01
 	mwb 0xE000ED08 0x00

tcl/target/lpc2148.cfg

@@ -38,8 +38,8 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
-	# Force target into ARM state.
-	soft_reset_halt
+	# Force target into ARM state
+	armv4_5 core_state arm
 
 	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
 	# "User Flash Mode" where interrupt vectors are _not_ remapped,

tcl/target/lpc2378.cfg

@@ -35,7 +35,7 @@ $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-s
 
 $_TARGETNAME configure -event reset-init {
 	# Force target into ARM state
-	soft_reset_halt
+	armv4_5 core_state arm
 	#do not remap 0x0000-0x0020 to anything but the flash
 	mwb 0xE01FC040 0x01
 }