added at91sam9260.cfg, nslu2.cfg, pxa255.cfg, pxa255_sst.cfg

zy1000.cfg
 

git-svn-id: svn://svn.berlios.de/openocd/trunk@435 b42882b7-edfa-0310-969c-e2dbd0fdcd60

configure.in

@@ -5,6 +5,7 @@ AC_SEARCH_LIBS([ioperm], [ioperm])
 
 AC_CANONICAL_HOST
 
+AC_CHECK_HEADERS(jtag_minidriver.h)
 AC_CHECK_HEADERS(sys/param.h)
 AC_CHECK_HEADERS(elf.h)
 

src/target/Makefile.am

@@ -22,6 +22,8 @@ noinst_HEADERS = target.h trace.h register.h armv4_5.h embeddedice.h etm.h arm7t
 nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script target/at91eb40a.cfg \
 	event/at91r40008_reset.script event/sam7s256_reset.script event/sam7x256_reset.script \
 	target/at91r40008.cfg target/lpc2148.cfg target/lpc2294.cfg target/sam7s256.cfg \
-	target/sam7x256.cfg target/str710.cfg target/str912.cfg
+	target/sam7x256.cfg target/str710.cfg target/str912.cfg target/nslu2.cfg target/pxa255_sst.cfg \
+	target/pxa255.cfg  target/zy1000.cfg event/zy1000_reset.script event/at91sam9260_reset.script target/at91sam9260.cfg 
+	
 
 

src/target/event/at91sam9260_reset.script

+mww 0xfffffd08 0xa5000501         # RSTC_MR : enable user reset
+mww 0xfffffd44 0x00008000         # WDT_MR : disable watchdog
+
+mww 0xfffffc20 0x00004001         # CKGR_MOR : enable the main oscillator
+sleep 20                          # wait 20 ms
+mww 0xfffffc30 0x00000001         # PMC_MCKR : switch to main oscillator
+sleep 10                          # wait 10 ms
+mww 0xfffffc28 0x2060bf09         # CKGR_PLLAR: Set PLLA Register for 198,656MHz
+sleep 20                          # wait 20 ms
+mww 0xfffffc30 0x00000101         # PMC_MCKR : Select prescaler
+sleep 10                          # wait 10 ms
+mww 0xfffffc30 0x00000102         # PMC_MCKR : Clock from PLLA is selected
+sleep 10                          # wait 10 ms
+
+jtag_speed 0                      # Increase JTAG Speed to 6 MHz
+arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+
+mww 0xffffec00 0x01020102         # SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
+mww 0xffffec04 0x09070806         # SMC_PULSE0
+mww 0xffffec08 0x000d000b         # SMC_CYCLE0
+mww 0xffffec0c 0x00001003         # SMC_MODE0
+
+flash probe 0                     # Identify flash bank 0
+
+mww 0xfffff870 0xffff0000         # PIO_ASR : Select peripheral function for D15..D31
+mww 0xfffff804 0xffff0000         # PIO_PDR : Disable PIO function for D15..D31
+
+mww 0xffffef1c 0x2                # EBI_CSA : Assign EBI Chip Select 1 to SDRAM
+
+#mww 0xffffea08 0x85227259         # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S561632H-UC75 : 4M x 16Bit x 4 Banks)
+mww 0xffffea08 0x85227254         # SDRAMC_CR : Configure SDRAM (2 x Samsung K4S641632H-UC75 : 1M x 16Bit x 4 Banks)
+
+mww 0xffffea00 0x1                # SDRAMC_MR : issue a NOP command
+mww 0x20000000 0
+mww 0xffffea00 0x2                # SDRAMC_MR : issue an 'All Banks Precharge' command
+mww 0x20000000 0
+mww 0xffffea00 0x4                # SDRAMC_MR : issue 8 x 'Auto-Refresh' Command
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x4
+mww 0x20000000 0
+mww 0xffffea00 0x3                # SDRAMC_MR : issue a 'Load Mode Register' command
+mww 0x20000000 0
+mww 0xffffea00 0x0                # SDRAMC_MR : normal mode
+mww 0x20000000 0
+mww 0xffffea04 0x5d2              # SDRAMC_TR : Set refresh timer count to 15us
+

src/target/event/zy1000_reset.script

+reg cpsr 0x000000D3
+ 		
+mww 0xFFE00000 0x0100273D
+mww 0xFFE00004 0x08002125
+mww 0xFFEe0008 0x02002125
+mww 0xFFE0000c 0x03002125
+mww 0xFFE00010 0x40000000
+mww 0xFFE00014 0x50000000
+mww 0xFFE00018 0x60000000
+mww 0xFFE0001c 0x70000000
+mww 0xFFE00020 0x00000001
+mww 0xFFE00024 0x00000000
+  
+mww 0xFFFFF124 0xFFFFFFFF  
+mww 0xffff0010 0x100
+mww 0xffff0034 0x100
+
+

src/target/target/at91sam9260.cfg

+# Thanks to Pieter Conradie for this script! 
+# Target:    Atmel AT91SAM9260
+######################################
+
+reset_config trst_and_srst
+
+#jtag_device <IR length> <IR capture> <IR mask> <IDCODE instruction>
+jtag_device 4 0x1 0xf 0xe
+
+jtag_nsrst_delay 200
+jtag_ntrst_delay 0
+
+######################
+# Target configuration
+######################
+
+#target <type> <endianess> <reset mode> <JTAG pos> <variant>
+target arm926ejs little reset_init 0 arm926ejs
+
+target_script 0 reset event/at91sam9260_reset.script
+run_and_halt_time 0 30
+
+#working area <target#> <address> <size> <backup|nobackup>
+working_area 0 0x00300000 0x1000 backup
+
+
+#####################
+# Flash configuration
+#####################
+
+#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+flash bank cfi 0x10000000 0x01000000 2 2 0
+

src/target/target/nslu2.cfg

+# use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only
+
+# jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 7 0x1 0x7f 0x7e
+
+# target configuration
+target xscale big reset_init 0 ixp42x
+run_and_halt_time 0 30
+
+# maps to PXA internal RAM.  If you are using a PXA255
+# you must initialize SDRAM or leave this option off
+working_area 0 0x00020000 0x10000 nobackup
+
+# flash bank <driver> <base> <size> <chip_width> <bus_width>
+#flash bank cfi 0x50000000 0x1000000 2 4 0 
+
+
+
+
+

src/target/target/pxa255.cfg

+jtag_device 5 0x1 0x1f 0x1e
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+target xscale little reset_init 0 pxa255
+reset_config trst_and_srst
+run_and_halt_time 0 30
+
+target_script 0 reset /ram/pxa255.init
+
+#xscale debug_handler 0  0xFFFF0800      # debug handler base address
+
+trunc /ram/pxa255.init
+append /ram/pxa255.init #configuration file for PXA250 Evaluation Board
+append /ram/pxa255.init # -----------------------------------------------------
+append /ram/pxa255.init #
+append /ram/pxa255.init xscale cp15   15      0x00002001  #Enable CP0 and CP13 access
+append /ram/pxa255.init #
+append /ram/pxa255.init # setup GPIO
+append /ram/pxa255.init #
+append /ram/pxa255.init mww    0x40E00018  0x00008000  #CPSR0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E0001C  0x00000002  #GPSR1
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00020  0x00000008  #GPSR2
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E0000C  0x00008000  #GPDR0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00054  0x80000000  #GAFR0_L
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00058  0x00188010  #GAFR0_H
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E0005C  0x60908018  #GAFR1_L
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E0000C  0x0280E000  #GPDR0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00010  0x821C88B2  #GPDR1
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00014  0x000F03DB  #GPDR2
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x40E00000  0x000F03DB  #GPLR0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init 
+append /ram/pxa255.init 
+append /ram/pxa255.init mww    0x40F00004  0x00000020  #PSSR
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init 
+append /ram/pxa255.init #
+append /ram/pxa255.init # setup memory controller
+append /ram/pxa255.init #
+append /ram/pxa255.init mww    0x48000008  0x01111998  #MSC0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000010  0x00047ff0  #MSC2
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000014  0x00000000  #MECR
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000028  0x00010504  #MCMEM0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x4800002C  0x00010504  #MCMEM1
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000030  0x00010504  #MCATT0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000034  0x00010504  #MCATT1
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000038  0x00004715  #MCIO0
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x4800003C  0x00004715  #MCIO1
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init #
+append /ram/pxa255.init mww    0x48000004  0x03CA4018  #MDREF
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000004  0x004B4018  #MDREF
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000004  0x000B4018  #MDREF
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000004  0x000BC018  #MDREF
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000000  0x00001AC8  #MDCNFG
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init 
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init 
+append /ram/pxa255.init mww    0x48000000  0x00001AC9  #MDCNFG
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init mww    0x48000040  0x00000000  #MDMRS
+append /ram/pxa255.init sleep   20
+append /ram/pxa255.init 

src/target/target/pxa255_sst.cfg

+# A PXA255 test board with SST 39LF400A flash
+#
+# At reset the memory map is as follows. Note that
+# the memory map changes later on as the application 
+# starts...
+#
+# RAM at 0x40000000
+# Flash at 0x00000000
+#
+script /target/pxa255.cfg
+# flash bank <driver> <base> <size> <chip_width> <bus_width> <targetNum> [options]
+flash bank cfi 0x00000000 0x80000 2 2 0 jedec_probe
+working_area 0 0x4000000 0x4000 nobackup 0

src/target/target/zy1000.cfg

+#Script for ZY1000
+
+#Atmel ties SRST & TRST together, at which point it makes
+#no sense to use TRST, but use TMS instead.
+#
+#The annoying thing with tying SRST & TRST together is that
+#there is no way to halt the CPU *before and during* the
+#SRST reset, which means that the CPU will run a number
+#of cycles before it can be halted(as much as milliseconds).
+reset_config srst_only srst_pulls_trst
+ 
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
+target arm7tdmi little reset_init 0 arm7tdmi-s_r4
+
+# at CPU CLK <32kHz this must be disabled
+arm7 fast_memory_access enable
+arm7_9 dcc_downloads enable
+
+
+flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf
+target_script 0 reset event/zy1000_reset.script
+
+# required for usable performance. Used for lots of
+# other things than flash programming.
+working_area 0 0x00000000 0x20000 nobackup