Fix docs on ARM11 MCR and MRC coprocessor commands:
correct read-vs-write; and describe the params.

(ARM920 and ARM926 have cp15-specific commands; this
approach is more generic.  MCR2, MRC2, MCRR, MCRR2,
MRRC, and MRRC2 instructions could also get exposed.)

git-svn-id: svn://svn.berlios.de/openocd/trunk@2679 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2678 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2677 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Provide an "armv7a disassemble" command.  Current omissions include
VFP (except as coprocessor instructions), Neon, and various Thumb2
opcodes that are not available in ARMv7-M processors.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2676 b42882b7-edfa-0310-969c-e2dbd0fdcd60

lean up some loose ends with the ARM disassembler

 - Add a header comment describing its current state and uses
   and referencing the now-generally-available V7 arch spec

 - Support some mode switch instructions:
    * Thumb to Jazelle (BXJ)
    * Thumb to ThumbEE (ENTERX)
    * ThumbEE to Thumb (LEAVEX)

 - Improve that recent warning fix (and associated whitespace goof)

 - Declare the rest of the internal code and data "static".  A
   compiler may use this, and it helps clarify the scope of these
   routines (e.g. what changes to them could affect).


git-svn-id: svn://svn.berlios.de/openocd/trunk@2675 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2674 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Mahr, Stefan <Stefan.Mahr@sphairon.com> removes the endianness swapping in mips_m4k.c Swapping is already done in target.c

git-svn-id: svn://svn.berlios.de/openocd/trunk@2673 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 

git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60

By enabling this bit, the processor halts when a debug event
such as breakpoint occurs.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2668 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2667 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2666 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Abstract the orion_nand_fast_block_write() routine into a separate
routine -- arm_nandwrite() -- so that other ARM cores can reuse it.

Have davinci_nand do so.  This faster than byte-at-a-time ops by a
factor of three (!), even given the slowish interactions to support
hardware ECC (1-bit flavor in that test) each 512 bytes; those could
be read more efficiently by on-chip code.

NOTE that until there's a generic "ARM algorithm" structure, this
can't work on newer ARMv6 (like ARM1136) or ARMv7A (like Cortex-A8)
cores, though the downloaded code itself would work just fine there.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2663 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2660 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2659 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2658 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Via code review by Steve Grubb <sgrubb@redhat.com> 

Almost innocuous; this is value is checked later, this
check being wrong would make it check stack garbage.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2655 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Dirk Behme <dirk.behme@googlemail.com> Fix typo in help text. It has to be 'production_test' instead of 'production' here.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2654 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2653 b42882b7-edfa-0310-969c-e2dbd0fdcd60

Via code review by Steve Grubb <sgrubb@redhat.com> 

Also minor fixes for the message from "fill":  the byte
count is unsigned, not signed; and more importantly,
print the real number of bytes written

git-svn-id: svn://svn.berlios.de/openocd/trunk@2652 b42882b7-edfa-0310-969c-e2dbd0fdcd60

 - Itemize the list of private customization examples
  for openocd.cfg

 - Add "override defaults" as a customization, specifically
  for the work area (back it up or relocate it)

 - Highlight some work area location issues

git-svn-id: svn://svn.berlios.de/openocd/trunk@2651 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2650 b42882b7-edfa-0310-969c-e2dbd0fdcd60

David Brownell <david-b@pacbell.net> Be sure the built-in search paths always go *after* ones provided
on the command line ... matching comment in add_default_dirs().

Without this it's impossible to use a private config file which
happens to have the same name as an installed one.  Say, because
you're bugfixing a private copy...

git-svn-id: svn://svn.berlios.de/openocd/trunk@2649 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2648 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2647 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2646 b42882b7-edfa-0310-969c-e2dbd0fdcd60

defining ntrst_delay is pointless; don't.

At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60

David Brownell <david-b@pacbell.net> ARM disassembly support for about five dozen non-Thumb instructions
that were added after ARMv5TE was defined:

 - ARMv5J "BXJ" (for Java/Jazelle)
 - ARMv6 "media" instructions (for OMAP2420, i.MX31, etc)

Compile-tested.  This might not set up the simulator right for the
ARMv6 single step support; only BXJ branches though, and docs to
support Jazelle branching are non-public (still, sigh).

ARMv6 instructions known to be mis-handled by this disassembler
include:  UMAAL, LDREX, STREX, CPS, SETEND, RFE, SRS, MCRR2, MRRC2

git-svn-id: svn://svn.berlios.de/openocd/trunk@2644 b42882b7-edfa-0310-969c-e2dbd0fdcd60

arm11 hardware step using simulation + breakpoint. Use "hardware_step enable" command to revert to hardware stepping. Ideally we could retire the "hardware_step enable" command once we no longer believe it to be necessary. 

git-svn-id: svn://svn.berlios.de/openocd/trunk@2643 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2642 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2641 b42882b7-edfa-0310-969c-e2dbd0fdcd60

git-svn-id: svn://svn.berlios.de/openocd/trunk@2640 b42882b7-edfa-0310-969c-e2dbd0fdcd60