Commits · 0da2f750a1d437b50b21ac7ee766188a47b37fad · card10 / openocd

Oct 06, 2009

Add basic support for DM6446 EVM board. · 0da2f750

dbrownell authored 15 years ago

git-svn-id: svn://svn.berlios.de/openocd/trunk@2808 b42882b7-edfa-0310-969c-e2dbd0fdcd60

0da2f750

Dragonite target script · 7d78021e

dbrownell authored 15 years ago

From: Nicolas Pitre <nico@fluxnic.net>


git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60

7d78021e

stop using targetnum · a2886fe3

oharboe authored 15 years ago

git-svn-id: svn://svn.berlios.de/openocd/trunk@2804 b42882b7-edfa-0310-969c-e2dbd0fdcd60

a2886fe3

Oct 05, 2009

Add a new JTAG "setup" event; use for better DaVinci ICEpick support. · 7c7467b3

dbrownell authored 15 years ago

The model is that this fires after scanchain verification, when it's
safe to call "jtag tapenable $TAPNAME".  So it will fire as part of
non-error paths of "init" and "reset" command processing.  However it
will *NOT* trigger during "jtag_reset" processing, which skips all
scan chain verification, or after verification errors.

ALSO:
 - switch DaVinci chips to use this new mechanism
 - log TAP activation/deactivation, since their IDCODEs aren't verified
 - unify "enum jtag_event" scripted event notifications
 - remove duplicative JTAG_TAP_EVENT_POST_RESET


git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60

7c7467b3

Get rid of needless OMAP and Davinci target config options · c6b24fb4

dbrownell authored 15 years ago

so they provide better examples and are easier to maintain.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60

c6b24fb4

Oct 02, 2009

Updated reset event handling in omap3530 cfg · f87985b6

mlu authored 15 years ago

git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60

f87985b6

Sep 30, 2009

Remove annoying EOL whitespace (again, sigh). · 32599fab
dbrownell authored 15 years ago
```
git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
```
32599fab

strip gdb config options · 54c16fc5

oharboe authored 15 years ago

git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60

54c16fc5

michal smulski <michal.smulski@ooma.com> reset now works · 64251964
oharboe authored 15 years ago
```
git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
```
64251964

Sep 27, 2009
- Don't provide invalid OMAP5912 IR capture value/mask attributes · fbbd3066
  dbrownell authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  fbbd3066
Sep 26, 2009

On DM355 EVM board, associate NAND chips with $_TARGETNAME · 5c3c4af8

dbrownell authored 15 years ago

instead of a target number.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2761 b42882b7-edfa-0310-969c-e2dbd0fdcd60

5c3c4af8

Sep 25, 2009
- Update DM355 target config to know about ICEpick. · ad43374c
  dbrownell authored 15 years ago
  
  Still defaults to nonstandard EMU0/EMU1 settings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  ad43374c
- Michael Hasselberg <mh@open-engineering.de> target configuration files for Toshiba TX09 familiy · 43b38078
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  43b38078
Sep 21, 2009

Remove annoying end-of-line whitespace from tcl/* files · 71af49ca
dbrownell authored 15 years ago
```
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
```
71af49ca
Ethan Eade <ethan@evolution.com> board config script for Cogent CSB732 i.MX35 (arm1136) · 0bcf5a6b
oharboe authored 15 years ago
```
git-svn-id: svn://svn.berlios.de/openocd/trunk@2741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
```
0bcf5a6b

Ensure that DaVinci chips can't start with a too-fast JTAG clock. · 10802811

dbrownell authored 15 years ago

It can be sped up later, once it's known the PLLs are active.

Note that modern tools from TI all use adaptive clocking; and
that if that's done with OpenOCD, "too fast" is also a non-issue.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60

10802811

Sep 19, 2009

Reduced sleep time after reset · 01735c51

mlu authored 15 years ago

git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60

01735c51

Sep 18, 2009
- Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.c · 7b3be0e2
  mlu authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  7b3be0e2
Sep 16, 2009
- Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family (ARM968E). · 95423183
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  95423183
Sep 13, 2009
- Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register initialization · 772d8d06
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  772d8d06
Sep 12, 2009

David Brownell <david-b@pacbell.net> · 40f361dd

oharboe authored 15 years ago

Update the board config for the DaVinci DM355 EVM so the reset-init
event handler does the rest of the work it should do:

 - minor PLL setup bugfixes
 - initialize the DDR2 controller
 - probe both NAND banks
 - initialize UART0
 - enable the icache


git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60

40f361dd

Sep 11, 2009
- tap post reset event added. Allows omap3530 to send 100 runtest idle tickle's after a TAP_RESET. · 4f776182
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  4f776182
- - revert change made to sheevaplug.cfg in rev2573 · ec3015db
  ntfreak authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  ec3015db
- syntax error fix · 6dd8f37e
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  6dd8f37e
Sep 10, 2009
- michal smulski <michal.smulski@ooma.com> telo target/board scripts · b4acbee4
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  b4acbee4
Sep 04, 2009
- use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effects · 0b11e4db
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  0b11e4db
- Dirk Behme <dirk.behme@googlemail.com> retire jtag_speed usage · b13dbc80
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  b13dbc80
- Dirk Behme <dirk.behme@googlemail.com> Add default fall back freqency. · 982ac083
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2670 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  982ac083
- set ARM mode using explicit command rather than soft_reset_halt which has lots of side effects. · 2e29131f
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  2e29131f
- David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanup · ce89c7bf
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  ce89c7bf
- David Claffey <dnclaffey@gmail.com> get rid of reset recursion · 76b78fee
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  76b78fee
Sep 02, 2009
- David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design "PB44" · 3878b127
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  3878b127
- Crusty Code fixes from the tcl directory re-arragements · cde17a42
  duane authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2661 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  cde17a42
Aug 31, 2009
- Gary Carlson <gcarlson@carlson-minot.com> config file · bb5f713e
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2657 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  bb5f713e
- Ferdinand Postema <ferdinand@postema.eu> config script for the MMnet1001 module from Propox. · 0dd669f2
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2656 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  0dd669f2
Aug 28, 2009

David Brownell <david-b@pacbell.net> The Stellaris eval boards don't have TRST signals, so · a5d02116

oharboe authored 15 years ago

defining ntrst_delay is pointless; don't.

At least the LM3S3748 eval board doesn't need nsrst_delay
either; remove that too.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2645 b42882b7-edfa-0310-969c-e2dbd0fdcd60

a5d02116

Aug 25, 2009
- Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix regression from 2600 to 2604 · 14f2189e
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  14f2189e
- Brian Findlay <findlaybrian@gmail.com> finalize mini2440.cfg · 41bb41bb
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2611 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  41bb41bb
- use cortex_a8 instead of cortex_m3 · 9df861b0
  oharboe authored 15 years ago
  
  git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
  9df861b0
Aug 21, 2009

Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the... · 6336ebb0

oharboe authored 15 years ago

Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the right spots. Should have been done in previous commit.

git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60

6336ebb0